diff --git a/flashchips.c b/flashchips.c
index c722a64..d50df85 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -9903,7 +9903,202 @@
 		.voltage	= {2700, 3600}, /* 2.3-3.6V for Pm25LD040 */
 	},
 
-{
+	{
+		.vendor		= "PMC",
+		.name		= "Pm25LQ020",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= PMC_ID,
+		.model_id	= PMC_PM25LQ020,
+		.total_size	= 256,
+		.page_size	= 256,
+		/* OTP: 256B total; read 0x4B, write 0xB1 */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 64} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {4 * 1024, 64} },
+				.block_erase = spi_block_erase_d7,
+			}, {
+				.eraseblocks = { {64 * 1024, 4} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {256 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {256 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
+		.unlock		= spi_disable_blockprotect_bp3_srwd,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read,
+		.voltage	= {2300, 3600},
+	},
+
+	{
+		.vendor		= "PMC",
+		.name		= "Pm25LQ040",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= PMC_ID,
+		.model_id	= PMC_PM25LQ040,
+		.total_size	= 512,
+		.page_size	= 256,
+		/* OTP: 256B total; read 0x4B, write 0xB1 */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 128} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {4 * 1024, 128} },
+				.block_erase = spi_block_erase_d7,
+			}, {
+				.eraseblocks = { {64 * 1024, 8} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {512 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {512 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
+		.unlock		= spi_disable_blockprotect_bp3_srwd,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+		.voltage	= {2300, 3600},
+	},
+
+	{
+		.vendor		= "PMC",
+		.name		= "Pm25LQ080",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= PMC_ID,
+		.model_id	= PMC_PM25LQ080,
+		.total_size	= 1024,
+		.page_size	= 256,
+		/* OTP: 64B total; read 0x4B, write 0xB1 */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 256} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {4 * 1024, 256} },
+				.block_erase = spi_block_erase_d7,
+			}, {
+				.eraseblocks = { {64 * 1024, 16} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {1024 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {1024 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
+		.unlock		= spi_disable_blockprotect_bp3_srwd,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+		.voltage	= {2300, 3600},
+	},
+
+	{
+		.vendor		= "PMC",
+		.name		= "Pm25LQ016",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= PMC_ID,
+		.model_id	= PMC_PM25LQ016,
+		.total_size	= 2048,
+		.page_size	= 256,
+		/* OTP: 256B total; read 0x4B, write 0xB1 */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
+		.tested		= TEST_UNTESTED,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 512} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {4 * 1024, 512} },
+				.block_erase = spi_block_erase_d7,
+			}, {
+				.eraseblocks = { {64 * 1024, 32} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {2048 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {2048 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
+		.unlock		= spi_disable_blockprotect_bp3_srwd,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+		.voltage	= {2300, 3600},
+	},
+
+	{
+		.vendor		= "PMC",
+		.name		= "Pm25LQ032C",
+		.bustype	= BUS_SPI,
+		.manufacture_id	= PMC_ID,
+		.model_id	= PMC_PM25LQ032C,
+		.total_size	= 4096,
+		.page_size	= 256,
+		/* OTP: 64B total; read 0x4B, write 0xB1 */
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP,
+		.tested		= TEST_OK_PR,
+		.probe		= probe_spi_rdid,
+		.probe_timing	= TIMING_ZERO,
+		.block_erasers	=
+		{
+			{
+				.eraseblocks = { {4 * 1024, 1024} },
+				.block_erase = spi_block_erase_20,
+			}, {
+				.eraseblocks = { {4 * 1024, 1024} },
+				.block_erase = spi_block_erase_d7,
+			}, {
+				.eraseblocks = { {64 * 1024, 64} },
+				.block_erase = spi_block_erase_d8,
+			}, {
+				.eraseblocks = { {4096 * 1024, 1} },
+				.block_erase = spi_block_erase_60,
+			}, {
+				.eraseblocks = { {4096 * 1024, 1} },
+				.block_erase = spi_block_erase_c7,
+			}
+		},
+		.printlock	= spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
+		.unlock		= spi_disable_blockprotect_bp3_srwd,
+		.write		= spi_chip_write_256,
+		.read		= spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+		.voltage	= {2700, 3600},
+	},
+
+	{
 		.vendor		= "PMC",
 		.name		= "Pm25LV512(A)",
 		.bustype	= BUS_SPI,
diff --git a/flashchips.h b/flashchips.h
index 07ae49d..43bb33d 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -560,6 +560,11 @@
 #define PMC_PM25LD512		0x20	/* Same as Pm25LD512C, but the latter has more locking options. */
 #define PMC_PM25LD010		0x21	/* Same as Pm25LD010C, but the latter has more locking options. */
 #define PMC_PM25LD020		0x22	/* Same as Pm25LD020C, but the latter has more locking options. */
+#define PMC_PM25LQ020		0x42
+#define PMC_PM25LQ040		0x43
+#define PMC_PM25LQ080		0x44
+#define PMC_PM25LQ016		0x45
+#define PMC_PM25LQ032C		0x46
 #define PMC_PM25LV512		0x7B	/* Same as Pm25LV512A */
 #define PMC_PM25LV010		0x7C	/* Same as Pm25LV010A, but the former does not support RDID but RES3 only. */
 #define PMC_PM25LV020		0x7D