Add a bunch of new/tested motherboards, board/chipset enables and flash chips 2
- mark chipset enable for QS57 as OK
(my thinkpad)
- mark MSI G31M3-L(S) V2 (MS-7529) as OK
http://www.flashrom.org/pipermail/flashrom/2011-June/006634.html
- mark AT49BV512 as fully tested
http://www.flashrom.org/pipermail/flashrom/2011-June/006609.html
- mark MX25L4005 as fully tested
http://www.flashrom.org/pipermail/flashrom/2011-June/006634.html
- mark SST49LF020 as fully tested
http://www.flashrom.org/pipermail/flashrom/2011-May/006570.html
- mark SST25VF064C as fully tested
http://www.flashrom.org/pipermail/flashrom/2011-May/006586.html
- mark W25x16 as fully tested
http://www.flashrom.org/pipermail/flashrom/2011-June/006605.html
Corresponding to flashrom svn r1324.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flashchips.c b/flashchips.c
index 99cd489..427cdcd 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -2190,7 +2190,7 @@
.total_size = 64,
.page_size = 64,
.feature_bits = FEATURE_EITHER_RESET,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
@@ -3885,7 +3885,7 @@
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_OK_PRE,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -5418,7 +5418,7 @@
.model_id = SST_SST25VF064C,
.total_size = 8192,
.page_size = 256,
- .tested = TEST_OK_PRE,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -6220,7 +6220,7 @@
.total_size = 256,
.page_size = 16 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
- .tested = TEST_OK_PRE,
+ .tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
@@ -7907,7 +7907,7 @@
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_OK_PRE,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =