diff --git a/chipdrivers.h b/chipdrivers.h
index a3da865..20529d5 100644
--- a/chipdrivers.h
+++ b/chipdrivers.h
@@ -210,5 +210,11 @@
 int spi_block_erase_20_4ba_ereg(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
 int spi_block_erase_52_4ba_ereg(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
 int spi_block_erase_d8_4ba_ereg(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+int spi_byte_program_4ba_direct(struct flashctx *flash, unsigned int addr, uint8_t databyte);
+int spi_nbyte_program_4ba_direct(struct flashctx *flash, unsigned int addr, const uint8_t *bytes, unsigned int len);
+int spi_nbyte_read_4ba_direct(struct flashctx *flash, unsigned int addr, uint8_t *bytes, unsigned int len);
+int spi_block_erase_21_4ba_direct(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+int spi_block_erase_5c_4ba_direct(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+int spi_block_erase_dc_4ba_direct(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
 
 #endif /* !__CHIPDRIVERS_H__ */
diff --git a/flash.h b/flash.h
index 3e0b571..52f0d49 100644
--- a/flash.h
+++ b/flash.h
@@ -123,6 +123,10 @@
 #define FEATURE_4BA_SUPPORT		(1 << 10)
 #define FEATURE_4BA_ONLY 		(1 << 11)
 #define FEATURE_4BA_EXTENDED_ADDR_REG	(1 << 12)
+#define FEATURE_4BA_DIRECT_READ		(1 << 13)
+#define FEATURE_4BA_DIRECT_WRITE	(1 << 14)
+#define FEATURE_4BA_ALL_ERASERS_DIRECT  (1 << 15)
+#define FEATURE_4BA_ALL_DIRECT  (FEATURE_4BA_DIRECT_READ | FEATURE_4BA_DIRECT_WRITE | FEATURE_4BA_ALL_ERASERS_DIRECT)
 
 enum test_state {
 	OK = 0,
diff --git a/flashchips.c b/flashchips.c
index ca9a383..345ef88 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -14597,11 +14597,11 @@
 		/* supports SFDP */
 		/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
 		/* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */
-		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_SUPPORT,
+		.feature_bits	= FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_SUPPORT | FEATURE_4BA_DIRECT_READ,
 		.four_bytes_addr_funcs =
 		{
 			.enter_4ba = spi_enter_4ba_b7_we, /* enter 4-bytes addressing mode by CMD B7 + WREN */
-			.read_nbyte = spi_nbyte_read_4ba, /* read from 4-bytes addressing mode */
+			.read_nbyte = spi_nbyte_read_4ba_direct, /* read directly from any mode, no need to enter 4ba */
 			.program_byte = spi_byte_program_4ba, /* write from 4-bytes addressing mode */
 			.program_nbyte = spi_nbyte_program_4ba /* write from 4-bytes addressing mode */
 		},
diff --git a/flashrom.c b/flashrom.c
index 3adc3c0..8569a49 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -2233,8 +2233,14 @@
 		else if(flash->chip->feature_bits & FEATURE_4BA_EXTENDED_ADDR_REG) {
 			msg_cdbg("Using 4-bytes addressing with extended address register.\n");
 		}
-		/* Go to 4-Bytes Addressing mode */
-		else {
+		/* Go to 4-Bytes Addressing mode if selected
+		   operation requires 4-Bytes Addressing mode
+		   (no need if functions are direct-4BA) */
+		else if(((read_it || verify_it)
+			&& (!(flash->chip->feature_bits & FEATURE_4BA_DIRECT_READ)))
+		   || ((erase_it || write_it)
+			&& ((flash->chip->feature_bits & FEATURE_4BA_ALL_DIRECT) != FEATURE_4BA_ALL_DIRECT))) {
+
 			if (!flash->chip->four_bytes_addr_funcs.enter_4ba) {
 				msg_cerr("No function for Enter 4-bytes addressing mode for this flash chip.\n"
 					"Please report to flashrom@flashrom.org\n");
@@ -2248,6 +2254,11 @@
 
 			msg_cdbg("Switched to 4-bytes addressing mode.\n");
 		}
+		/* Do not switch to 4-Bytes Addressing mode if all instructions are direct-4BA
+		   or if the flash chip is 4-Bytes Addressing Only and always in 4BA-mode */
+		else {
+			msg_cdbg2("No need to switch to 4-bytes addressing mode.\n");
+		}
 	}
 
 	return 0;
diff --git a/spi4ba.c b/spi4ba.c
index 75730e0..93f19c4 100644
--- a/spi4ba.c
+++ b/spi4ba.c
@@ -645,3 +645,268 @@
 	/* FIXME: Check the status register for errors. */
 	return 0;
 }
+
+/* Program one flash byte with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+   JEDEC_BYTE_PROGRAM_4BA (12h) instruction is new for 4-bytes addressing flash chips.
+   The presence of this instruction for an exact chip should be checked
+   by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_byte_program_4ba_direct(struct flashctx *flash, unsigned int addr,
+				 uint8_t databyte)
+{
+	int result;
+	struct spi_command cmds[] = {
+	{
+		.writecnt	= JEDEC_WREN_OUTSIZE,
+		.writearr	= (const unsigned char[]){ JEDEC_WREN },
+		.readcnt	= 0,
+		.readarr	= NULL,
+	}, {
+		.writecnt	= JEDEC_BYTE_PROGRAM_4BA_OUTSIZE,
+		.writearr	= (const unsigned char[]){
+					JEDEC_BYTE_PROGRAM_4BA,
+					(addr >> 24) & 0xff,
+					(addr >> 16) & 0xff,
+					(addr >> 8) & 0xff,
+					(addr & 0xff),
+					databyte
+				},
+		.readcnt	= 0,
+		.readarr	= NULL,
+	}, {
+		.writecnt	= 0,
+		.writearr	= NULL,
+		.readcnt	= 0,
+		.readarr	= NULL,
+	}};
+
+	msg_trace("-> %s (0x%08X)\n", __func__, addr);
+
+	result = spi_send_multicommand(flash, cmds);
+	if (result) {
+		msg_cerr("%s failed during command execution at address 0x%x\n",
+			__func__, addr);
+	}
+	return result;
+}
+
+/* Program flash bytes with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+   JEDEC_BYTE_PROGRAM_4BA (12h) instruction is new for 4-bytes addressing flash chips.
+   The presence of this instruction for an exact chip should be checked
+   by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_nbyte_program_4ba_direct(struct flashctx *flash, unsigned int addr,
+				  const uint8_t *bytes, unsigned int len)
+{
+	int result;
+	unsigned char cmd[JEDEC_BYTE_PROGRAM_4BA_OUTSIZE - 1 + 256] = {
+		JEDEC_BYTE_PROGRAM_4BA,
+		(addr >> 24) & 0xff,
+		(addr >> 16) & 0xff,
+		(addr >> 8) & 0xff,
+		(addr >> 0) & 0xff
+	};
+	struct spi_command cmds[] = {
+	{
+		.writecnt	= JEDEC_WREN_OUTSIZE,
+		.writearr	= (const unsigned char[]){ JEDEC_WREN },
+		.readcnt	= 0,
+		.readarr	= NULL,
+	}, {
+		.writecnt	= JEDEC_BYTE_PROGRAM_4BA_OUTSIZE - 1 + len,
+		.writearr	= cmd,
+		.readcnt	= 0,
+		.readarr	= NULL,
+	}, {
+		.writecnt	= 0,
+		.writearr	= NULL,
+		.readcnt	= 0,
+		.readarr	= NULL,
+	}};
+
+	msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + len - 1);
+
+	if (!len) {
+		msg_cerr("%s called for zero-length write\n", __func__);
+		return 1;
+	}
+	if (len > 256) {
+		msg_cerr("%s called for too long a write\n", __func__);
+		return 1;
+	}
+
+	memcpy(&cmd[JEDEC_BYTE_PROGRAM_4BA_OUTSIZE - 1], bytes, len);
+
+	result = spi_send_multicommand(flash, cmds);
+	if (result) {
+		msg_cerr("%s failed during command execution at address 0x%x\n",
+			__func__, addr);
+	}
+	return result;
+}
+
+/* Read flash bytes with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+   JEDEC_READ_4BA (13h) instruction is new for 4-bytes addressing flash chips.
+   The presence of this instruction for an exact chip should be checked
+   by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_nbyte_read_4ba_direct(struct flashctx *flash, unsigned int addr,
+		   uint8_t *bytes, unsigned int len)
+{
+	const unsigned char cmd[JEDEC_READ_4BA_OUTSIZE] = {
+		JEDEC_READ_4BA,
+		(addr >> 24) & 0xff,
+		(addr >> 16) & 0xff,
+		(addr >> 8) & 0xff,
+		(addr >> 0) & 0xff
+	};
+
+	msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + len - 1);
+
+	/* Send Read */
+	return spi_send_command(flash, sizeof(cmd), len, cmd, bytes);
+}
+
+/* Erase 4 KB of flash with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+   JEDEC_SE_4BA (21h) instruction is new for 4-bytes addressing flash chips.
+   The presence of this instruction for an exact chip should be checked
+   by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_block_erase_21_4ba_direct(struct flashctx *flash, unsigned int addr,
+				   unsigned int blocklen)
+{
+	int result;
+	struct spi_command cmds[] = {
+	{
+		.writecnt	= JEDEC_WREN_OUTSIZE,
+		.writearr	= (const unsigned char[]){ JEDEC_WREN },
+		.readcnt	= 0,
+		.readarr	= NULL,
+	}, {
+		.writecnt	= JEDEC_SE_4BA_OUTSIZE,
+		.writearr	= (const unsigned char[]){
+					JEDEC_SE_4BA,
+					(addr >> 24) & 0xff,
+					(addr >> 16) & 0xff,
+					(addr >> 8) & 0xff,
+					(addr & 0xff)
+				},
+		.readcnt	= 0,
+		.readarr	= NULL,
+	}, {
+		.writecnt	= 0,
+		.writearr	= NULL,
+		.readcnt	= 0,
+		.readarr	= NULL,
+	}};
+
+	msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1);
+
+	result = spi_send_multicommand(flash, cmds);
+	if (result) {
+		msg_cerr("%s failed during command execution at address 0x%x\n",
+			__func__, addr);
+		return result;
+	}
+	/* Wait until the Write-In-Progress bit is cleared.
+	 * This usually takes 15-800 ms, so wait in 10 ms steps.
+	 */
+	while (spi_read_status_register(flash) & SPI_SR_WIP)
+		programmer_delay(10 * 1000);
+	/* FIXME: Check the status register for errors. */
+	return 0;
+}
+
+/* Erase 32 KB of flash with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+   JEDEC_BE_5C_4BA (5Ch) instruction is new for 4-bytes addressing flash chips.
+   The presence of this instruction for an exact chip should be checked
+   by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_block_erase_5c_4ba_direct(struct flashctx *flash, unsigned int addr,
+		       unsigned int blocklen)
+{
+	int result;
+	struct spi_command cmds[] = {
+	{
+		.writecnt	= JEDEC_WREN_OUTSIZE,
+		.writearr	= (const unsigned char[]){ JEDEC_WREN },
+		.readcnt	= 0,
+		.readarr	= NULL,
+	}, {
+		.writecnt	= JEDEC_BE_5C_4BA_OUTSIZE,
+		.writearr	= (const unsigned char[]){
+					JEDEC_BE_5C_4BA,
+					(addr >> 24) & 0xff,
+					(addr >> 16) & 0xff,
+					(addr >> 8) & 0xff,
+					(addr & 0xff)
+				},
+		.readcnt	= 0,
+		.readarr	= NULL,
+	}, {
+		.writecnt	= 0,
+		.writearr	= NULL,
+		.readcnt	= 0,
+		.readarr	= NULL,
+	}};
+
+	msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1);
+
+	result = spi_send_multicommand(flash, cmds);
+	if (result) {
+		msg_cerr("%s failed during command execution at address 0x%x\n",
+			__func__, addr);
+		return result;
+	}
+	/* Wait until the Write-In-Progress bit is cleared.
+	 * This usually takes 100-4000 ms, so wait in 100 ms steps.
+	 */
+	while (spi_read_status_register(flash) & SPI_SR_WIP)
+		programmer_delay(100 * 1000);
+	/* FIXME: Check the status register for errors. */
+	return 0;
+}
+
+/* Erase 64 KB of flash with 4-bytes address from ANY mode (3-bytes or 4-bytes)
+   JEDEC_BE_DC_4BA (DCh) instruction is new for 4-bytes addressing flash chips.
+   The presence of this instruction for an exact chip should be checked
+   by its datasheet or from SFDP 4-Bytes Address Instruction Table (JESD216B). */
+int spi_block_erase_dc_4ba_direct(struct flashctx *flash, unsigned int addr,
+				   unsigned int blocklen)
+{
+	int result;
+	struct spi_command cmds[] = {
+	{
+		.writecnt	= JEDEC_WREN_OUTSIZE,
+		.writearr	= (const unsigned char[]){ JEDEC_WREN },
+		.readcnt	= 0,
+		.readarr	= NULL,
+	}, {
+		.writecnt	= JEDEC_BE_DC_4BA_OUTSIZE,
+		.writearr	= (const unsigned char[]){
+					JEDEC_BE_DC_4BA,
+					(addr >> 24) & 0xff,
+					(addr >> 16) & 0xff,
+					(addr >> 8) & 0xff,
+					(addr & 0xff)
+				},
+		.readcnt	= 0,
+		.readarr	= NULL,
+	}, {
+		.writecnt	= 0,
+		.writearr	= NULL,
+		.readcnt	= 0,
+		.readarr	= NULL,
+	}};
+
+	msg_trace("-> %s (0x%08X-0x%08X)\n", __func__, addr, addr + blocklen - 1);
+
+	result = spi_send_multicommand(flash, cmds);
+	if (result) {
+		msg_cerr("%s failed during command execution at address 0x%x\n",
+			__func__, addr);
+		return result;
+	}
+	/* Wait until the Write-In-Progress bit is cleared.
+	 * This usually takes 100-4000 ms, so wait in 100 ms steps.
+	 */
+	while (spi_read_status_register(flash) & SPI_SR_WIP)
+		programmer_delay(100 * 1000);
+	/* FIXME: Check the status register for errors. */
+	return 0;
+}
diff --git a/spi4ba.h b/spi4ba.h
index f2e7bc5..8e500d1 100644
--- a/spi4ba.h
+++ b/spi4ba.h
@@ -46,6 +46,36 @@
 #define JEDEC_READ_EXT_ADDR_REG_OUTSIZE		0x01
 #define JEDEC_READ_EXT_ADDR_REG_INSIZE		0x01
 
+/* Read the memory with 4-byte address
+   From ANY mode (3-bytes or 4-bytes) it works with 4-byte address */
+#define JEDEC_READ_4BA		0x13
+#define JEDEC_READ_4BA_OUTSIZE	0x05
+/*      JEDEC_READ_4BA_INSIZE : any length */
+
+/* Write memory byte with 4-byte address
+   From ANY mode (3-bytes or 4-bytes) it works with 4-byte address */
+#define JEDEC_BYTE_PROGRAM_4BA		0x12
+#define JEDEC_BYTE_PROGRAM_4BA_OUTSIZE	0x06
+#define JEDEC_BYTE_PROGRAM_4BA_INSIZE	0x00
+
+/* Sector Erase 0x21 (with 4-byte address), usually 4k size.
+   From ANY mode (3-bytes or 4-bytes) it works with 4-byte address */
+#define JEDEC_SE_4BA		0x21
+#define JEDEC_SE_4BA_OUTSIZE	0x05
+#define JEDEC_SE_4BA_INSIZE	0x00
+
+/* Block Erase 0x5C (with 4-byte address), usually 32k size.
+   From ANY mode (3-bytes or 4-bytes) it works with 4-byte address */
+#define JEDEC_BE_5C_4BA		0x5C
+#define JEDEC_BE_5C_4BA_OUTSIZE	0x05
+#define JEDEC_BE_5C_4BA_INSIZE	0x00
+
+/* Block Erase 0xDC (with 4-byte address), usually 64k size.
+   From ANY mode (3-bytes or 4-bytes) it works with 4-byte address */
+#define JEDEC_BE_DC_4BA		0xdc
+#define JEDEC_BE_DC_4BA_OUTSIZE	0x05
+#define JEDEC_BE_DC_4BA_INSIZE	0x00
+
 /* enter 4-bytes addressing mode */
 int spi_enter_4ba_b7(struct flashctx *flash);
 int spi_enter_4ba_b7_we(struct flashctx *flash);
@@ -70,5 +100,15 @@
 int spi_block_erase_52_4ba_ereg(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
 int spi_block_erase_d8_4ba_ereg(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
 
+/* read/write flash bytes with 4-bytes address from any mode (3-byte or 4-byte) */
+int spi_byte_program_4ba_direct(struct flashctx *flash, unsigned int addr, uint8_t databyte);
+int spi_nbyte_program_4ba_direct(struct flashctx *flash, unsigned int addr, const uint8_t *bytes, unsigned int len);
+int spi_nbyte_read_4ba_direct(struct flashctx *flash, unsigned int addr, uint8_t *bytes, unsigned int len);
+
+/* erase flash bytes with 4-bytes address from any mode (3-byte or 4-byte) */
+int spi_block_erase_21_4ba_direct(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+int spi_block_erase_5c_4ba_direct(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+int spi_block_erase_dc_4ba_direct(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+
 
 #endif /* __SPI_4BA_H__ */