dediprog: Implement 4BA EAR mode for protocol v1
With an SF100 and protocol version 1, using the extended address
register of the flash chip seems safe. Make use of that and remove
the broken 4BA modes flag.
Tested with SF100 V:5.1.9 and W25Q256FV.
Change-Id: If926cf3cbbebf88231116c4d65bafc19d23646f6
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/32016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
diff --git a/dediprog.c b/dediprog.c
index 03675e5..d48c541 100644
--- a/dediprog.c
+++ b/dediprog.c
@@ -360,7 +360,7 @@
return 0;
}
-static void prepare_rw_cmd(
+static int prepare_rw_cmd(
struct flashctx *const flash, uint8_t *data_packet, unsigned int count,
uint8_t dedi_spi_cmd, unsigned int *value, unsigned int *idx, unsigned int start, int is_read) {
/* First 5 bytes are common in both generations. */
@@ -400,9 +400,23 @@
}
}
} else {
- *value = start % 0x10000;
- *idx = start / 0x10000;
+ if (flash->chip->feature_bits & FEATURE_4BA_EXT_ADDR) {
+ if (spi_set_extended_address(flash, start >> 24))
+ return 1;
+ } else if (start >> 24) {
+ msg_cerr("Can't handle 4-byte address with dediprog.\n");
+ return 1;
+ }
+ /*
+ * We don't know how the dediprog firmware handles 4-byte
+ * addresses. So let's not tell it what we are doing and
+ * only send the lower 3 bytes.
+ */
+ *value = start & 0xffff;
+ *idx = (start >> 16) & 0xff;
}
+
+ return 0;
}
/* Bulk read interface, will read multiple 512 byte chunks aligned to 512 bytes.
@@ -448,7 +462,8 @@
uint8_t data_packet[command_packet_size];
unsigned int value, idx;
- prepare_rw_cmd(flash, data_packet, count, READ_MODE_STD, &value, &idx, start, 1);
+ if (prepare_rw_cmd(flash, data_packet, count, READ_MODE_STD, &value, &idx, start, 1))
+ return 1;
int ret = dediprog_write(CMD_READ, value, idx, data_packet, sizeof(data_packet));
if (ret != sizeof(data_packet)) {
@@ -604,7 +619,8 @@
uint8_t data_packet[command_packet_size];
unsigned int value, idx;
- prepare_rw_cmd(flash, data_packet, count, dedi_spi_cmd, &value, &idx, start, 0);
+ if (prepare_rw_cmd(flash, data_packet, count, dedi_spi_cmd, &value, &idx, start, 0))
+ return 1;
int ret = dediprog_write(CMD_WRITE, value, idx, data_packet, sizeof(data_packet));
if (ret != sizeof(data_packet)) {
msg_perr("Command Write SPI Bulk failed, %s!\n", libusb_error_name(ret));
@@ -1134,6 +1150,9 @@
if (dediprog_standalone_mode())
return 1;
+ if (dediprog_devicetype == DEV_SF100 && protocol() == PROTOCOL_V1)
+ spi_master_dediprog.features &= ~SPI_MASTER_NO_4BA_MODES;
+
if (dediprog_devicetype == DEV_SF600 && protocol() == PROTOCOL_V2)
spi_master_dediprog.features |= SPI_MASTER_4BA;