diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl
index 27f3846..8ef2cbf 100644
--- a/flashrom.8.tmpl
+++ b/flashrom.8.tmpl
@@ -758,7 +758,8 @@
 This module supports various programmers based on FTDI FT2232/FT4232H/FT232H chips including the DLP Design
 DLP-USB1232H, openbiosprog-spi, Amontec JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster,
 Olimex ARM-USB-TINY/-H, Olimex ARM-USB-OCD/-H, OpenMoko Neo1973 Debug board (V2+), TIAO/DIYGADGET USB
-Multi-Protocol Adapter (TUMPA), TUMPA Lite, GOEPEL PicoTAP and Google Servo v1/v2.
+Multi-Protocol Adapter (TUMPA), TUMPA Lite, GOEPEL PicoTAP, Google Servo v1/v2 and Tin Can Tools
+Flyswatter/Flyswatter 2.
 .sp
 An optional parameter specifies the controller
 type, channel/interface/port and GPIO-based chip select it should support. For that you have to use the
diff --git a/ft2232_spi.c b/ft2232_spi.c
index 34b43dd..5bdc2a7 100644
--- a/ft2232_spi.c
+++ b/ft2232_spi.c
@@ -269,6 +269,12 @@
 		} else if (!strcasecmp(arg, "google-servo-v2-legacy")) {
 			ft2232_vid = GOOGLE_VID;
 			ft2232_type = GOOGLE_SERVO_V2_PID0;
+		} else if (!strcasecmp(arg, "flyswatter")) {
+			ft2232_type = FTDI_FT2232H_PID;
+			channel_count = 2;
+			/* Flyswatter and Flyswatter-2 require GPIO bits 0x80
+			 * and 0x40 to be driven low to enable output buffers */
+			pindir = 0xcb;
 		} else {
 			msg_perr("Error: Invalid device type specified.\n");
 			free(arg);