ft2232_spi: Add support for Tin Can Tools Flyswatter/Flyswatter 2
The Tin Can Tools Flyswatter and Flyswatter 2 have a FT2232H
with a JTAG interface wired to port A. The buffers that drive the
JTAG pins need to be enabled with an nOE signal from the
FT2232H ADBUS6 and ADBUS7 pins.
Flyswatter has an ARM-14 JTAG interface and Flyswatter 2 has
an ARM-20 JTAG interface.
Change-Id: I56b1fb76dcda32bb02980cd54a2853506bfc9dfd
Signed-off-by: Russ Dill <Russ.Dill@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/36896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
diff --git a/ft2232_spi.c b/ft2232_spi.c
index 34b43dd..5bdc2a7 100644
--- a/ft2232_spi.c
+++ b/ft2232_spi.c
@@ -269,6 +269,12 @@
} else if (!strcasecmp(arg, "google-servo-v2-legacy")) {
ft2232_vid = GOOGLE_VID;
ft2232_type = GOOGLE_SERVO_V2_PID0;
+ } else if (!strcasecmp(arg, "flyswatter")) {
+ ft2232_type = FTDI_FT2232H_PID;
+ channel_count = 2;
+ /* Flyswatter and Flyswatter-2 require GPIO bits 0x80
+ * and 0x40 to be driven low to enable output buffers */
+ pindir = 0xcb;
} else {
msg_perr("Error: Invalid device type specified.\n");
free(arg);