Use caching for Nvidia MCP SPI GPIO accesses
Reduce clock delay to zero.
Tests show more than 2x speedup.
Corresponding to flashrom svn r1164.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Andrew Morgan <ziltro@ziltro.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
diff --git a/mcp6x_spi.c b/mcp6x_spi.c
index bfdef2d..6635ddd 100644
--- a/mcp6x_spi.c
+++ b/mcp6x_spi.c
@@ -42,41 +42,39 @@
void *mcp6x_spibar = NULL;
+/* Cached value of last GPIO state. */
+static uint8_t mcp_gpiostate;
+
static void mcp6x_request_spibus(void)
{
- uint8_t tmp;
-
- tmp = mmio_readb(mcp6x_spibar + 0x530);
- tmp |= 1 << MCP6X_SPI_REQUEST;
- mmio_writeb(tmp, mcp6x_spibar + 0x530);
+ mcp_gpiostate = mmio_readb(mcp6x_spibar + 0x530);
+ mcp_gpiostate |= 1 << MCP6X_SPI_REQUEST;
+ mmio_writeb(mcp_gpiostate, mcp6x_spibar + 0x530);
/* Wait until we are allowed to use the SPI bus. */
while (!(mmio_readw(mcp6x_spibar + 0x530) & (1 << MCP6X_SPI_GRANT))) ;
+
+ /* Update the cache. */
+ mcp_gpiostate = mmio_readb(mcp6x_spibar + 0x530);
}
static void mcp6x_release_spibus(void)
{
- uint8_t tmp;
-
- tmp = mmio_readb(mcp6x_spibar + 0x530);
- tmp &= ~(1 << MCP6X_SPI_REQUEST);
- mmio_writeb(tmp, mcp6x_spibar + 0x530);
+ mcp_gpiostate &= ~(1 << MCP6X_SPI_REQUEST);
+ mmio_writeb(mcp_gpiostate, mcp6x_spibar + 0x530);
}
static void mcp6x_bitbang_set_cs(int val)
{
- uint8_t tmp;
-
/* Requesting and releasing the SPI bus is handled in here to allow the
* chipset to use its own SPI engine for native reads.
*/
if (val == 0)
mcp6x_request_spibus();
- tmp = mmio_readb(mcp6x_spibar + 0x530);
- tmp &= ~(1 << MCP6X_SPI_CS);
- tmp |= (val << MCP6X_SPI_CS);
- mmio_writeb(tmp, mcp6x_spibar + 0x530);
+ mcp_gpiostate &= ~(1 << MCP6X_SPI_CS);
+ mcp_gpiostate |= (val << MCP6X_SPI_CS);
+ mmio_writeb(mcp_gpiostate, mcp6x_spibar + 0x530);
if (val == 1)
mcp6x_release_spibus();
@@ -84,31 +82,22 @@
static void mcp6x_bitbang_set_sck(int val)
{
- uint8_t tmp;
-
- tmp = mmio_readb(mcp6x_spibar + 0x530);
- tmp &= ~(1 << MCP6X_SPI_SCK);
- tmp |= (val << MCP6X_SPI_SCK);
- mmio_writeb(tmp, mcp6x_spibar + 0x530);
+ mcp_gpiostate &= ~(1 << MCP6X_SPI_SCK);
+ mcp_gpiostate |= (val << MCP6X_SPI_SCK);
+ mmio_writeb(mcp_gpiostate, mcp6x_spibar + 0x530);
}
static void mcp6x_bitbang_set_mosi(int val)
{
- uint8_t tmp;
-
- tmp = mmio_readb(mcp6x_spibar + 0x530);
- tmp &= ~(1 << MCP6X_SPI_MOSI);
- tmp |= (val << MCP6X_SPI_MOSI);
- mmio_writeb(tmp, mcp6x_spibar + 0x530);
+ mcp_gpiostate &= ~(1 << MCP6X_SPI_MOSI);
+ mcp_gpiostate |= (val << MCP6X_SPI_MOSI);
+ mmio_writeb(mcp_gpiostate, mcp6x_spibar + 0x530);
}
static int mcp6x_bitbang_get_miso(void)
{
- uint8_t tmp;
-
- tmp = mmio_readb(mcp6x_spibar + 0x530);
- tmp = (tmp >> MCP6X_SPI_MISO) & 0x1;
- return tmp;
+ mcp_gpiostate = mmio_readb(mcp6x_spibar + 0x530);
+ return (mcp_gpiostate >> MCP6X_SPI_MISO) & 0x1;
}
static const struct bitbang_spi_master bitbang_spi_master_mcp6x = {
@@ -176,9 +165,10 @@
msg_pdbg("SPI control is 0x%04x, req=%i, gnt=%i\n",
status, (status >> MCP6X_SPI_REQUEST) & 0x1,
(status >> MCP6X_SPI_GRANT) & 0x1);
+ mcp_gpiostate = status & 0xff;
- /* 1 usec halfperiod delay for now. */
- if (bitbang_spi_init(&bitbang_spi_master_mcp6x, 1)) {
+ /* Zero halfperiod delay. */
+ if (bitbang_spi_init(&bitbang_spi_master_mcp6x, 0)) {
/* This should never happen. */
msg_perr("MCP6X bitbang SPI master init failed!\n");
return 1;