Add functions to read/erase/write/verify by layout
Inspired by Lynxis' related work, this implements a foundation for
layout based flash access.
All operations iterate over the given layout regions. Erase and write
then walk, per region, over all erase blocks in an inner loop (which
might not be what we want, see note on optimization below). Special care
has been taken that flash content is merged properly, in case an erase
block is only partially covered by a layout region or even affects mul-
tiple regions.
A note on performance: In the case an erase block affects multiple
regions, it will probably be read, erased and written for each region.
Another approach would be to walk all erase blocks once and check for
each erase block which regions it touches (i.e. for each erase block,
merge data pontentially from the flash and all layout regions, then
flash the combined data). That might result in cleaner code. I haven't
tried it yet, though.
Change-Id: Ic6194cea4c4c430e0cf9d586052508a865b09c86
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
diff --git a/flashrom.c b/flashrom.c
index 25e53f2..273eb99 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -5,6 +5,8 @@
* Copyright (C) 2004 Tyan Corp <yhlu@tyan.com>
* Copyright (C) 2005-2008 coresystems GmbH
* Copyright (C) 2008,2009 Carl-Daniel Hailfinger
+ * Copyright (C) 2016 secunet Security Networks AG
+ * (Written by Nico Huber <nico.huber@secunet.com> for secunet)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -1245,6 +1247,14 @@
if (!flash->chip)
return -1;
+ /* Fill fallback layout covering the whole chip. */
+ struct single_layout *const fallback = &flash->fallback_layout;
+ fallback->base.entries = &fallback->entry;
+ fallback->base.num_entries = 1;
+ fallback->entry.start = 0;
+ fallback->entry.end = flash->chip->total_size * 1024 - 1;
+ fallback->entry.included = true;
+ strcpy(fallback->entry.name, "complete flash");
tmp = flashbuses_to_text(flash->chip->bustype);
msg_cinfo("%s %s flash chip \"%s\" (%d kB, %s) ", force ? "Assuming" : "Found",
@@ -1640,6 +1650,346 @@
return ret;
}
+static const struct flashrom_layout *get_layout(const struct flashctx *const flashctx)
+{
+ if (flashctx->layout && flashctx->layout->num_entries)
+ return flashctx->layout;
+ else
+ return &flashctx->fallback_layout.base;
+}
+
+/**
+ * @brief Reads the included layout regions into a buffer.
+ *
+ * If there is no layout set in the given flash context, the whole chip will
+ * be read.
+ *
+ * @param flashctx Flash context to be used.
+ * @param buffer Buffer of full chip size to read into.
+ * @return 0 on success,
+ * 1 if any read fails.
+ */
+static int read_by_layout(struct flashctx *const flashctx, uint8_t *const buffer)
+{
+ const struct flashrom_layout *const layout = get_layout(flashctx);
+
+ size_t i;
+ for (i = 0; i < layout->num_entries; ++i) {
+ if (!layout->entries[i].included)
+ continue;
+
+ const chipoff_t region_start = layout->entries[i].start;
+ const chipsize_t region_len = layout->entries[i].end - layout->entries[i].start + 1;
+
+ if (flashctx->chip->read(flashctx, buffer + region_start, region_start, region_len))
+ return 1;
+ }
+ return 0;
+}
+
+typedef int (*erasefn_t)(struct flashctx *, unsigned int addr, unsigned int len);
+/**
+ * @private
+ *
+ * For read-erase-write, `curcontents` and `newcontents` shall point
+ * to buffers of the chip's size. Both are supposed to be prefilled
+ * with at least the included layout regions of the current flash
+ * contents (`curcontents`) and the data to be written to the flash
+ * (`newcontents`).
+ *
+ * For erase, `curcontents` and `newcontents` shall be NULL-pointers.
+ *
+ * The `chipoff_t` values are used internally by `walk_by_layout()`.
+ */
+struct walk_info {
+ uint8_t *curcontents;
+ const uint8_t *newcontents;
+ chipoff_t region_start;
+ chipoff_t region_end;
+ chipoff_t erase_start;
+ chipoff_t erase_end;
+};
+/* returns 0 on success, 1 to retry with another erase function, 2 for immediate abort */
+typedef int (*per_blockfn_t)(struct flashctx *, const struct walk_info *, erasefn_t);
+
+static int walk_eraseblocks(struct flashctx *const flashctx,
+ struct walk_info *const info,
+ const size_t erasefunction, const per_blockfn_t per_blockfn)
+{
+ int ret;
+ size_t i, j;
+ bool first = true;
+ struct block_eraser *const eraser = &flashctx->chip->block_erasers[erasefunction];
+
+ info->erase_start = 0;
+ for (i = 0; i < NUM_ERASEREGIONS; ++i) {
+ /* count==0 for all automatically initialized array
+ members so the loop below won't be executed for them. */
+ for (j = 0; j < eraser->eraseblocks[i].count; ++j, info->erase_start = info->erase_end + 1) {
+ info->erase_end = info->erase_start + eraser->eraseblocks[i].size - 1;
+
+ /* Skip any eraseblock that is completely outside the current region. */
+ if (info->erase_end < info->region_start)
+ continue;
+ if (info->region_end < info->erase_start)
+ break;
+
+ /* Print this for every block except the first one. */
+ if (first)
+ first = false;
+ else
+ msg_cdbg(", ");
+ msg_cdbg("0x%06x-0x%06x:", info->erase_start, info->erase_end);
+
+ ret = per_blockfn(flashctx, info, eraser->block_erase);
+ if (ret)
+ return ret;
+ }
+ if (info->region_end < info->erase_start)
+ break;
+ }
+ msg_cdbg("\n");
+ return 0;
+}
+
+static int walk_by_layout(struct flashctx *const flashctx, struct walk_info *const info,
+ const per_blockfn_t per_blockfn)
+{
+ const struct flashrom_layout *const layout = get_layout(flashctx);
+
+ all_skipped = true;
+ msg_cinfo("Erasing and writing flash chip... ");
+
+ size_t i;
+ for (i = 0; i < layout->num_entries; ++i) {
+ if (!layout->entries[i].included)
+ continue;
+
+ info->region_start = layout->entries[i].start;
+ info->region_end = layout->entries[i].end;
+
+ size_t j;
+ int error = 1; /* retry as long as it's 1 */
+ for (j = 0; j < NUM_ERASEFUNCTIONS; ++j) {
+ if (j != 0)
+ msg_cinfo("Looking for another erase function.\n");
+ msg_cdbg("Trying erase function %zi... ", j);
+ if (check_block_eraser(flashctx, j, 1))
+ continue;
+
+ error = walk_eraseblocks(flashctx, info, j, per_blockfn);
+ if (error != 1)
+ break;
+
+ if (info->curcontents) {
+ msg_cinfo("Reading current flash chip contents... ");
+ if (read_by_layout(flashctx, info->curcontents)) {
+ /* Now we are truly screwed. Read failed as well. */
+ msg_cerr("Can't read anymore! Aborting.\n");
+ /* We have no idea about the flash chip contents, so
+ retrying with another erase function is pointless. */
+ error = 2;
+ break;
+ }
+ msg_cinfo("done. ");
+ }
+ }
+ if (error == 1)
+ msg_cinfo("No usable erase functions left.\n");
+ if (error) {
+ msg_cerr("FAILED!\n");
+ return 1;
+ }
+ }
+ if (all_skipped)
+ msg_cinfo("\nWarning: Chip content is identical to the requested image.\n");
+ msg_cinfo("Erase/write done.\n");
+ return 0;
+}
+
+static int erase_block(struct flashctx *const flashctx,
+ const struct walk_info *const info, const erasefn_t erasefn)
+{
+ const unsigned int erase_len = info->erase_end + 1 - info->erase_start;
+
+ all_skipped = false;
+
+ msg_cdbg("E");
+ if (erasefn(flashctx, info->erase_start, erase_len))
+ return 1;
+ if (check_erased_range(flashctx, info->erase_start, erase_len)) {
+ msg_cerr("ERASE FAILED!\n");
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * @brief Erases the included layout regions.
+ *
+ * If there is no layout set in the given flash context, the whole chip will
+ * be erased.
+ *
+ * @param flashctx Flash context to be used.
+ * @param buffer Buffer of full chip size to read into.
+ * @return 0 on success,
+ * 1 if all available erase functions failed.
+ */
+int erase_by_layout(struct flashctx *const flashctx)
+{
+ struct walk_info info = { 0 };
+ return walk_by_layout(flashctx, &info, &erase_block);
+}
+
+static int read_erase_write_block(struct flashctx *const flashctx,
+ const struct walk_info *const info, const erasefn_t erasefn)
+{
+ const chipsize_t erase_len = info->erase_end + 1 - info->erase_start;
+ const bool region_unaligned = info->region_start > info->erase_start ||
+ info->erase_end > info->region_end;
+ const uint8_t *newcontents = NULL;
+ int ret = 2;
+
+ /*
+ * If the region is not erase-block aligned, merge current flash con-
+ * tents into `info->curcontents` and a new buffer `newc`. The former
+ * is necessary since we have no guarantee that the full erase block
+ * was already read into `info->curcontents`. For the latter a new
+ * buffer is used since `info->newcontents` might contain data for
+ * other unaligned regions that touch this erase block too.
+ */
+ if (region_unaligned) {
+ msg_cdbg("R");
+ uint8_t *const newc = malloc(erase_len);
+ if (!newc) {
+ msg_cerr("Out of memory!\n");
+ return 1;
+ }
+ memcpy(newc, info->newcontents + info->erase_start, erase_len);
+
+ /* Merge data preceding the current region. */
+ if (info->region_start > info->erase_start) {
+ const chipoff_t start = info->erase_start;
+ const chipsize_t len = info->region_start - info->erase_start;
+ if (flashctx->chip->read(flashctx, newc, start, len)) {
+ msg_cerr("Can't read! Aborting.\n");
+ goto _free_ret;
+ }
+ memcpy(info->curcontents + start, newc, len);
+ }
+ /* Merge data following the current region. */
+ if (info->erase_end > info->region_end) {
+ const chipoff_t start = info->region_end + 1;
+ const chipoff_t rel_start = start - info->erase_start; /* within this erase block */
+ const chipsize_t len = info->erase_end - info->region_end;
+ if (flashctx->chip->read(flashctx, newc + rel_start, start, len)) {
+ msg_cerr("Can't read! Aborting.\n");
+ goto _free_ret;
+ }
+ memcpy(info->curcontents + start, newc + rel_start, len);
+ }
+
+ newcontents = newc;
+ } else {
+ newcontents = info->newcontents + info->erase_start;
+ }
+
+ ret = 1;
+ bool skipped = true;
+ uint8_t *const curcontents = info->curcontents + info->erase_start;
+ if (need_erase(curcontents, newcontents, erase_len, flashctx->chip->gran)) {
+ if (erase_block(flashctx, info, erasefn))
+ goto _free_ret;
+ /* Erase was successful. Adjust curcontents. */
+ memset(curcontents, 0xff, erase_len);
+ skipped = false;
+ }
+
+ unsigned int starthere = 0, lenhere = 0, writecount = 0;
+ /* get_next_write() sets starthere to a new value after the call. */
+ while ((lenhere = get_next_write(curcontents + starthere, newcontents + starthere,
+ erase_len - starthere, &starthere, flashctx->chip->gran))) {
+ if (!writecount++)
+ msg_cdbg("W");
+ /* Needs the partial write function signature. */
+ if (flashctx->chip->write(flashctx, newcontents + starthere,
+ info->erase_start + starthere, lenhere))
+ goto _free_ret;
+ starthere += lenhere;
+ skipped = false;
+ }
+ if (skipped)
+ msg_cdbg("S");
+ else
+ all_skipped = false;
+
+ /* Update curcontents, other regions with overlapping erase blocks
+ might rely on this. */
+ memcpy(curcontents, newcontents, erase_len);
+ ret = 0;
+
+_free_ret:
+ if (region_unaligned)
+ free((void *)newcontents);
+ return ret;
+}
+
+/**
+ * @brief Writes the included layout regions from a given image.
+ *
+ * If there is no layout set in the given flash context, the whole image
+ * will be written.
+ *
+ * @param flashctx Flash context to be used.
+ * @param curcontents A buffer of full chip size with current chip contents of included regions.
+ * @param newcontents The new image to be written.
+ * @return 0 on success,
+ * 1 if anything has gone wrong.
+ */
+int write_by_layout(struct flashctx *const flashctx,
+ void *const curcontents, const void *const newcontents)
+{
+ struct walk_info info;
+ info.curcontents = curcontents;
+ info.newcontents = newcontents;
+ return walk_by_layout(flashctx, &info, read_erase_write_block);
+}
+
+/**
+ * @brief Compares the included layout regions with content from a buffer.
+ *
+ * If there is no layout set in the given flash context, the whole chip's
+ * contents will be compared.
+ *
+ * @param flashctx Flash context to be used.
+ * @param curcontents A buffer of full chip size to read current chip contents into.
+ * @param newcontents The new image to compare to.
+ * @return 0 on success,
+ * 1 if reading failed,
+ * 3 if the contents don't match.
+ */
+int verify_by_layout(struct flashctx *const flashctx,
+ void *const curcontents, const uint8_t *const newcontents)
+{
+ const struct flashrom_layout *const layout = get_layout(flashctx);
+
+ size_t i;
+ for (i = 0; i < layout->num_entries; ++i) {
+ if (!layout->entries[i].included)
+ continue;
+
+ const chipoff_t region_start = layout->entries[i].start;
+ const chipsize_t region_len = layout->entries[i].end - layout->entries[i].start + 1;
+
+ if (flashctx->chip->read(flashctx, curcontents + region_start, region_start, region_len))
+ return 1;
+ if (compare_range(newcontents + region_start, curcontents + region_start,
+ region_start, region_len))
+ return 3;
+ }
+ return 0;
+}
+
static void nonfatal_help_message(void)
{
msg_gerr("Good, writing to the flash chip apparently didn't do anything.\n");