Add a bunch of new/tested stuff and various small changes 23
Tested mainboards:
OK:
- Elitegroup GF7050VT-M
Reported by Alex
- Fujitsu D2724-A1x (used in ESPRIMO E5625)
Reported by Rainer Spillmann
- Teclast X98 Air 3G
Reported by Antonio Ospite
Flash chips:
- Fix MX25L6405(D) definition by splitting it.
Reported by Reggie McMurtrey
- Add Macronix MX25L..08E family and rearrange MX25L6436E.
- Pm49FL004 to PREW (+EW)
Reported by Georg Sauthoff
Miscellaneous:
- Add board enable for abit KN9 Ultra.
- Mark ARM-USB-OCD as working OK.
- Use "mobile devices" instead of "laptops" in output.
- Tiny other stuff.
Corresponding to flashrom svn r1886.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flashchips.c b/flashchips.c
index 4f36e95..8b5d1ec 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -6803,12 +6803,14 @@
{
.vendor = "Macronix",
- .name = "MX25L8005/MX25L8006E/MX25V8005",
+ .name = "MX25L8005/MX25L8006E/MX25L8008E/MX25V8005",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L8005,
.total_size = 1024,
.page_size = 256,
+ /* MX25L8006E, MX25L8008E support SFDP */
+ /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L8006E, MX25L8008E only) */
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
@@ -6876,13 +6878,13 @@
{
.vendor = "Macronix",
- .name = "MX25L1605A/MX25L1606E",
+ .name = "MX25L1605A/MX25L1606E/MX25L1608E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L1605,
.total_size = 2048,
.page_size = 256,
- /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L1606E only) */
+ /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L1606E and MX25L1608E only) */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
@@ -6909,7 +6911,7 @@
.printlock = spi_prettyprint_status_register_bp3_srwd, /* MX25L1605A bp2 only */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
- .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .read = spi_chip_read, /* Fast read (0x0B) supported (MX25L1608E supports dual-I/O read) */
.voltage = {2700, 3600},
},
@@ -6941,7 +6943,7 @@
.block_erase = spi_block_erase_c7,
},
},
- .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode */
+ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode, for 73E is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */
@@ -7084,7 +7086,7 @@
.block_erase = spi_block_erase_c7,
},
},
- .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: CP mode */
+ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */
@@ -7093,7 +7095,7 @@
{
.vendor = "Macronix",
- .name = "MX25L3206E",
+ .name = "MX25L3206E/MX25L3208E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L3205,
@@ -7207,14 +7209,14 @@
{
.vendor = "Macronix",
- .name = "MX25L6405(D)",
+ .name = "MX25L6405",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L6405,
.total_size = 8192,
.page_size = 256,
- /* MX25L6405D has 64B of OTP; enter 0xB1, exit 0xC1 */
- .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ /* Has an additional 512B EEPROM sector */
+ .feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -7234,22 +7236,22 @@
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 has different meanings */
+ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: error flag */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
- .read = spi_chip_read,
+ .read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
- .name = "MX25L6406E/MX25L6436E",
+ .name = "MX25L6405D",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L6405,
.total_size = 8192,
.page_size = 256,
- /* OTP: 06E 64B/36E 512B total; enter 0xB1, exit 0xC1 */
+ /* OTP: 64B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
@@ -7270,16 +7272,56 @@
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 for 36E is quad enable */
+ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
- .read = spi_chip_read,
+ .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0xBB) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
- .name = "MX25L6445E/MX25L6465E/MX25L6473E",
+ .name = "MX25L6406E/MX25L6408E",
+ .bustype = BUS_SPI,
+ .manufacture_id = MACRONIX_ID,
+ .model_id = MACRONIX_MX25L6405,
+ .total_size = 8192,
+ .page_size = 256,
+ /* MX25L6406E supports SFDP */
+ /* OTP: 06E 64B total; enter 0xB1, exit 0xC1 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 2048} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 128} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 128} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {8 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {8 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_bp3_srwd,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B), dual I/O read supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Macronix",
+ .name = "MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L6405,
@@ -10126,9 +10168,9 @@
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
- .tested = TEST_OK_PR,
+ .tested = TEST_OK_PREW,
.probe = probe_jedec,
- .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */
+ .probe_timing = TIMING_ZERO,
.block_erasers =
{
{