/*
 * This file is part of the flashrom project.
 *
 * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
 * Copyright (C) 2009 Carl-Daniel Hailfinger
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */

#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include "flash.h"
#include "programmer.h"

/*
 * Return a string corresponding to the bustype parameter.
 * Memory is obtained with malloc() and must be freed with free() by the caller.
 */
char *flashbuses_to_text(enum chipbustype bustype)
{
	char *ret = calloc(1, 1);
	/*
	 * FIXME: Once all chipsets and flash chips have been updated, NONSPI
	 * will cease to exist and should be eliminated here as well.
	 */
	if (bustype == BUS_NONSPI) {
		ret = strcat_realloc(ret, "Non-SPI, ");
	} else {
		if (bustype & BUS_PARALLEL)
			ret = strcat_realloc(ret, "Parallel, ");
		if (bustype & BUS_LPC)
			ret = strcat_realloc(ret, "LPC, ");
		if (bustype & BUS_FWH)
			ret = strcat_realloc(ret, "FWH, ");
		if (bustype & BUS_SPI)
			ret = strcat_realloc(ret, "SPI, ");
		if (bustype & BUS_PROG)
			ret = strcat_realloc(ret, "Programmer-specific, ");
		if (bustype == BUS_NONE)
			ret = strcat_realloc(ret, "None, ");
	}
	/* Kill last comma. */
	ret[strlen(ret) - 2] = '\0';
	ret = realloc(ret, strlen(ret) + 1);
	return ret;
}

static void print_supported_chips(void)
{
	const char *delim = "/";
	const int mintoklen = 5;
	const int border = 2;
	int i, chipcount = 0;
	int maxvendorlen = strlen("Vendor") + 1;
	int maxchiplen = strlen("Device") + 1;
	int maxtypelen = strlen("Type") + 1;
	const struct flashchip *chip;
	char *s;
	char *tmpven, *tmpdev;
	int tmpvenlen, tmpdevlen, curvenlen, curdevlen;

	/* calculate maximum column widths and by iterating over all chips */
	for (chip = flashchips; chip->name != NULL; chip++) {
		/* Ignore generic entries. */
		if (!strncmp(chip->vendor, "Unknown", 7) ||
		    !strncmp(chip->vendor, "Programmer", 10) ||
		    !strncmp(chip->name, "unknown", 7))
			continue;
		chipcount++;

		/* Find maximum vendor length (respecting line splitting). */
		tmpven = (char *)chip->vendor;
		do {
			/* and take minimum token lengths into account */
			tmpvenlen = 0;
			do {
				tmpvenlen += strcspn(tmpven, delim);
				/* skip to the address after the first token */
				tmpven += tmpvenlen;
				if (tmpven[0] == '\0')
					break;
				tmpven++;
			} while (tmpvenlen < mintoklen);
			maxvendorlen = max(maxvendorlen, tmpvenlen);
			if (tmpven[0] == '\0')
				break;
		} while (1);

		/* same for device name */
		tmpdev = (char *)chip->name;
		do {
			tmpdevlen = 0;
			do {
				tmpdevlen += strcspn(tmpdev, delim);
				tmpdev += tmpdevlen;
				if (tmpdev[0] == '\0')
					break;
				tmpdev++;
			} while (tmpdevlen < mintoklen);
			maxchiplen = max(maxchiplen, tmpdevlen);
			if (tmpdev[0] == '\0')
				break;
		} while (1);

		s = flashbuses_to_text(chip->bustype);
		maxtypelen = max(maxtypelen, strlen(s));
		free(s);
	}
	maxvendorlen += border;
	maxchiplen += border;
	maxtypelen += border;

	msg_ginfo("Supported flash chips (total: %d):\n\n", chipcount);
	msg_ginfo("Vendor");
	for (i = strlen("Vendor"); i < maxvendorlen; i++)
		msg_ginfo(" ");
	msg_ginfo("Device");
	for (i = strlen("Device"); i < maxchiplen; i++)
		msg_ginfo(" ");

	msg_ginfo("Test");
	for (i = 0; i < border; i++)
		msg_ginfo(" ");
	msg_ginfo("Known");
	for (i = 0; i < border; i++)
		msg_ginfo(" ");
	msg_ginfo(" Size");
	for (i = 0; i < border; i++)
		msg_ginfo(" ");

	msg_ginfo("Type");
	for (i = strlen("Type"); i < maxtypelen; i++)
		msg_ginfo(" ");
	msg_gdbg("Voltage");
	msg_ginfo("\n");

	for (i = 0; i < maxvendorlen + maxchiplen; i++)
		msg_ginfo(" ");
	msg_ginfo("OK  ");
	for (i = 0; i < border; i++)
		msg_ginfo(" ");
	msg_ginfo("Broken");
	for (i = 0; i < border; i++)
		msg_ginfo(" ");
	msg_ginfo("[kB]");
	for (i = 0; i < border + maxtypelen; i++)
		msg_ginfo(" ");
	msg_gdbg("range [V]");
	msg_ginfo("\n\n");
	msg_ginfo("(P = PROBE, R = READ, E = ERASE, W = WRITE)\n\n");

	for (chip = flashchips; chip->name != NULL; chip++) {
		/* Don't print generic entries. */
		if (!strncmp(chip->vendor, "Unknown", 7) ||
		    !strncmp(chip->vendor, "Programmer", 10) ||
		    !strncmp(chip->name, "unknown", 7))
			continue;

		/* support for multiline vendor names:
		 * - make a copy of the original vendor name
		 * - use strok to put the first token in tmpven
		 * - keep track of the length of all tokens on the current line
		 *   for ' '-padding in curvenlen
		 * - check if additional tokens should be printed on the current
		 *   line
		 * - after all other values are printed print the surplus tokens
		 *   on fresh lines
		 */
		tmpven = malloc(strlen(chip->vendor) + 1);
		if (tmpven == NULL) {
			msg_gerr("Out of memory!\n");
			exit(1);
		}
		strcpy(tmpven, chip->vendor);

		tmpven = strtok(tmpven, delim);
		msg_ginfo("%s", tmpven);
		curvenlen = strlen(tmpven);
		while ((tmpven = strtok(NULL, delim)) != NULL) {
			msg_ginfo("%s", delim);
			curvenlen++;
			tmpvenlen = strlen(tmpven);
			if (tmpvenlen >= mintoklen)
				break; /* big enough to be on its own line */
			msg_ginfo("%s", tmpven);
			curvenlen += tmpvenlen;
		}

		for (i = curvenlen; i < maxvendorlen; i++)
			msg_ginfo(" ");

		/* support for multiline device names as above */
		tmpdev = malloc(strlen(chip->name) + 1);
		if (tmpdev == NULL) {
			msg_gerr("Out of memory!\n");
			exit(1);
		}
		strcpy(tmpdev, chip->name);

		tmpdev = strtok(tmpdev, delim);
		msg_ginfo("%s", tmpdev);
		curdevlen = strlen(tmpdev);
		while ((tmpdev = strtok(NULL, delim)) != NULL) {
			msg_ginfo("%s", delim);
			curdevlen++;
			tmpdevlen = strlen(tmpdev);
			if (tmpdevlen >= mintoklen)
				break; /* big enough to be on its own line */
			msg_ginfo("%s", tmpdev);
			curdevlen += tmpdevlen;
		}

		for (i = curdevlen; i < maxchiplen; i++)
			msg_ginfo(" ");

		if ((chip->tested & TEST_OK_PROBE))
			msg_ginfo("P");
		else
			msg_ginfo(" ");
		if ((chip->tested & TEST_OK_READ))
			msg_ginfo("R");
		else
			msg_ginfo(" ");
		if ((chip->tested & TEST_OK_ERASE))
			msg_ginfo("E");
		else
			msg_ginfo(" ");
		if ((chip->tested & TEST_OK_WRITE))
			msg_ginfo("W");
		else
			msg_ginfo(" ");
		for (i = 0; i < border; i++)
			msg_ginfo(" ");

		if ((chip->tested & TEST_BAD_PROBE))
			msg_ginfo("P");
		else
			msg_ginfo(" ");
		if ((chip->tested & TEST_BAD_READ))
			msg_ginfo("R");
		else
			msg_ginfo(" ");
		if ((chip->tested & TEST_BAD_ERASE))
			msg_ginfo("E");
		else
			msg_ginfo(" ");
		if ((chip->tested & TEST_BAD_WRITE))
			msg_ginfo("W");
		else
			msg_ginfo(" ");
		for (i = 0; i < border + 1; i++)
			msg_ginfo(" ");

		msg_ginfo("%5d", chip->total_size);
		for (i = 0; i < border; i++)
			msg_ginfo(" ");

		s = flashbuses_to_text(chip->bustype);
		msg_ginfo("%s", s);
		for (i = strlen(s); i < maxtypelen; i++)
			msg_ginfo(" ");
		free(s);

		if (chip->voltage.min == 0 && chip->voltage.max == 0)
			msg_gdbg("no info");
		else
			msg_gdbg("%0.02f;%0.02f",
				 chip->voltage.min/(double)1000,
				 chip->voltage.max/(double)1000);

		/* print surplus vendor and device name tokens */
		while (tmpven != NULL || tmpdev != NULL) {
			msg_ginfo("\n");
			if (tmpven != NULL){
				msg_ginfo("%s", tmpven);
				curvenlen = strlen(tmpven);
				while ((tmpven = strtok(NULL, delim)) != NULL) {
					msg_ginfo("%s", delim);
					curvenlen++;
					tmpvenlen = strlen(tmpven);
					/* big enough to be on its own line */
					if (tmpvenlen >= mintoklen)
						break;
					msg_ginfo("%s", tmpven);
					curvenlen += tmpvenlen;
				}
			} else
				curvenlen = 0;

			for (i = curvenlen; i < maxvendorlen; i++)
				msg_ginfo(" ");

			if (tmpdev != NULL){
				msg_ginfo("%s", tmpdev);
				curdevlen = strlen(tmpdev);
				while ((tmpdev = strtok(NULL, delim)) != NULL) {
					msg_ginfo("%s", delim);
					curdevlen++;
					tmpdevlen = strlen(tmpdev);
					/* big enough to be on its own line */
					if (tmpdevlen >= mintoklen)
						break;
					msg_ginfo("%s", tmpdev);
					curdevlen += tmpdevlen;
				}
			}
		}
		msg_ginfo("\n");
	}
}

#if CONFIG_INTERNAL == 1
static void print_supported_chipsets(void)
{
	int i, chipsetcount = 0;
	const struct penable *c = chipset_enables;
	int maxvendorlen = strlen("Vendor") + 1;
	int maxchipsetlen = strlen("Chipset") + 1;

	for (c = chipset_enables; c->vendor_name != NULL; c++) {
		chipsetcount++;
		maxvendorlen = max(maxvendorlen, strlen(c->vendor_name));
		maxchipsetlen = max(maxchipsetlen, strlen(c->device_name));
	}
	maxvendorlen++;
	maxchipsetlen++;

	msg_ginfo("Supported chipsets (total: %d):\n\n", chipsetcount);

	msg_ginfo("Vendor");
	for (i = strlen("Vendor"); i < maxvendorlen; i++)
		msg_ginfo(" ");

	msg_ginfo("Chipset");
	for (i = strlen("Chipset"); i < maxchipsetlen; i++)
		msg_ginfo(" ");

	msg_ginfo("PCI IDs   State\n\n");

	for (c = chipset_enables; c->vendor_name != NULL; c++) {
		msg_ginfo("%s", c->vendor_name);
		for (i = 0; i < maxvendorlen - strlen(c->vendor_name); i++)
			msg_ginfo(" ");
		msg_ginfo("%s", c->device_name);
		for (i = 0; i < maxchipsetlen - strlen(c->device_name); i++)
			msg_ginfo(" ");
		msg_ginfo("%04x:%04x%s\n", c->vendor_id, c->device_id,
		       (c->status == NT) ? " (untested)" : "");
	}
}

static void print_supported_boards_helper(const struct board_info *boards,
				   const char *devicetype)
{
	int i;
	unsigned int boardcount_good = 0, boardcount_bad = 0, boardcount_nt = 0;
	const struct board_match *e = board_matches;
	const struct board_info *b = boards;
	int maxvendorlen = strlen("Vendor") + 1;
	int maxboardlen = strlen("Board") + 1;

	for (b = boards; b->vendor != NULL; b++) {
		maxvendorlen = max(maxvendorlen, strlen(b->vendor));
		maxboardlen = max(maxboardlen, strlen(b->name));
		if (b->working == OK)
			boardcount_good++;
		else if (b->working == NT)
			boardcount_nt++;
		else
			boardcount_bad++;
	}
	maxvendorlen++;
	maxboardlen++;

	msg_ginfo("%d known %s (good: %d, untested: %d, bad: %d):\n\n",
		  boardcount_good + boardcount_nt + boardcount_bad,
		  devicetype, boardcount_good, boardcount_nt, boardcount_bad);

	msg_ginfo("Vendor");
	for (i = strlen("Vendor"); i < maxvendorlen; i++)
		msg_ginfo(" ");

	msg_ginfo("Board");
	for (i = strlen("Board"); i < maxboardlen; i++)
		msg_ginfo(" ");

	msg_ginfo("Status  Required value for\n");
	for (i = 0; i < maxvendorlen + maxboardlen + strlen("Status  "); i++)
		msg_ginfo(" ");
	msg_ginfo("-p internal:mainboard=\n");

	for (b = boards; b->vendor != NULL; b++) {
		msg_ginfo("%s", b->vendor);
		for (i = 0; i < maxvendorlen - strlen(b->vendor); i++)
			msg_ginfo(" ");
		msg_ginfo("%s", b->name);
		for (i = 0; i < maxboardlen - strlen(b->name); i++)
			msg_ginfo(" ");
			if (b->working == OK)
				msg_ginfo("OK      ");
			else if (b->working == NT)
				msg_ginfo("NT      ");
			else
				msg_ginfo("BAD     ");

		for (e = board_matches; e->vendor_name != NULL; e++) {
			if (strcmp(e->vendor_name, b->vendor)
			    || strcmp(e->board_name, b->name))
				continue;
			if (e->lb_vendor == NULL)
				msg_ginfo("(autodetected)");
			else
				msg_ginfo("%s:%s", e->lb_vendor,
						   e->lb_part);
		}
		msg_ginfo("\n");
	}
}
#endif

void print_supported(void)
{
	print_supported_chips();

	msg_ginfo("\nSupported programmers:\n");
	list_programmers_linebreak(0, 80, 0);
#if CONFIG_INTERNAL == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n\n",
	       programmer_table[PROGRAMMER_INTERNAL].name);
	print_supported_chipsets();
	msg_ginfo("\n");
	print_supported_boards_helper(boards_known, "boards");
	msg_ginfo("\n");
	print_supported_boards_helper(laptops_known, "laptops");
#endif
#if CONFIG_DUMMY == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_DUMMY].name);
	/* FIXME */
	msg_ginfo("Dummy device, does nothing and logs all accesses\n");
#endif
#if CONFIG_NIC3COM == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_NIC3COM].name);
	print_supported_pcidevs(nics_3com);
#endif
#if CONFIG_NICREALTEK == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_NICREALTEK].name);
	print_supported_pcidevs(nics_realtek);
#endif
#if CONFIG_NICNATSEMI == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_NICNATSEMI].name);
	print_supported_pcidevs(nics_natsemi);
#endif
#if CONFIG_GFXNVIDIA == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_GFXNVIDIA].name);
	print_supported_pcidevs(gfx_nvidia);
#endif
#if CONFIG_DRKAISER == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_DRKAISER].name);
	print_supported_pcidevs(drkaiser_pcidev);
#endif
#if CONFIG_SATASII == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_SATASII].name);
	print_supported_pcidevs(satas_sii);
#endif
#if CONFIG_ATAHPT == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_ATAHPT].name);
	print_supported_pcidevs(ata_hpt);
#endif
#if CONFIG_FT2232_SPI == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_FT2232_SPI].name);
	print_supported_usbdevs(devs_ft2232spi);
#endif
#if CONFIG_SERPROG == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_SERPROG].name);
	/* FIXME */
	msg_ginfo("All programmer devices speaking the serprog protocol\n");
#endif
#if CONFIG_BUSPIRATE_SPI == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_BUSPIRATE_SPI].name);
	/* FIXME */
	msg_ginfo("Dangerous Prototypes Bus Pirate\n");
#endif
#if CONFIG_DEDIPROG == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_DEDIPROG].name);
	/* FIXME */
	msg_ginfo("Dediprog SF100\n");
#endif
#if CONFIG_RAYER_SPI == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_RAYER_SPI].name);
	/* FIXME */
	msg_ginfo("RayeR parallel port programmer\n");
#endif
#if CONFIG_PONY_SPI == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_PONY_SPI].name);
	/* FIXME */
	msg_ginfo("SI-Prog, serbang and AJAWe serial port programmers\n");
#endif
#if CONFIG_NICINTEL == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_NICINTEL].name);
	print_supported_pcidevs(nics_intel);
#endif
#if CONFIG_NICINTEL_SPI == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_NICINTEL_SPI].name);
	print_supported_pcidevs(nics_intel_spi);
#endif
#if CONFIG_OGP_SPI == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_OGP_SPI].name);
	print_supported_pcidevs(ogp_spi);
#endif
#if CONFIG_SATAMV == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_SATAMV].name);
	print_supported_pcidevs(satas_mv);
#endif
#if CONFIG_LINUX_SPI == 1
	msg_ginfo("\nSupported devices for the %s programmer:\n",
	       programmer_table[PROGRAMMER_LINUX_SPI].name);
	msg_ginfo("Device files /dev/spidev*.*\n");
#endif
}

#if CONFIG_INTERNAL == 1

#ifdef CONFIG_PRINT_WIKI
#define B(vendor, name, status, url, note) { vendor, name, status, url, note }
#else
#define B(vendor, name, status, url, note) { vendor, name, status }
#endif

/* Please keep this list alphabetically ordered by vendor/board. */
const struct board_info boards_known[] = {
#if defined(__i386__) || defined(__x86_64__)
	B("A-Trend",	"ATC-6220",		OK, "http://www.motherboard.cz/mb/atrend/atc6220.htm", NULL),
	B("abit",	"A-S78H",		OK, NULL, NULL),
	B("abit",	"AN-M2",		OK, NULL, NULL),
	B("abit",	"AV8",			OK, NULL, NULL),
	B("abit",	"AX8",			OK, NULL, NULL),
	B("abit",	"BM6",			OK, NULL, NULL),
	B("abit",	"Fatal1ty F-I90HD",	OK, NULL, NULL),
	B("abit",	"IC7",			OK, NULL, NULL),
	B("abit",	"IP35",			OK, NULL, NULL),
	B("abit",	"IP35 Pro",		OK, NULL, NULL),
	B("abit",	"IS-10",		BAD, NULL, "Reported by deejkuba@aol.com to flashrom@coreboot.org, no public archive. Missing board enable and/or M50FW040 unlocking. May work now."),
	B("abit",	"KN8 Ultra",		OK, NULL, NULL),
	B("abit",	"NF-M2 nView",		OK, NULL, NULL),
	B("abit",	"NF-M2S",		OK, NULL, NULL),
	B("abit",	"NF7-S",		OK, NULL, NULL),
	B("abit",	"VA6",			OK, NULL, NULL),
	B("abit",	"VT6X4",		OK, NULL, NULL),
	B("Acorp",	"6A815EPD",		OK, "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.asp", NULL),
	B("Advantech",	"PCM-5820",		OK, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL),
	B("agami",	"Aruma",		OK, "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-6000-series", NULL),
	B("Albatron",	"PM266A Pro",		OK, "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview&no=56", NULL), /* FIXME */
	B("AOpen",	"i945GMx-VFX",		OK, NULL, "This is (also?) an OEM board from FSC (used in e.g. ESPRIMO Q5010 with designation D2544-B1)."),
	B("AOpen",	"vKM400Am-S",		OK, "http://usa.aopen.com/products_detail.aspx?Auno=824", NULL),
	B("Artec Group","DBE61",		OK, "http://wiki.thincan.org/DBE61", NULL),
	B("Artec Group","DBE62",		OK, "http://wiki.thincan.org/DBE62", NULL),
	B("ASI",	"MB-5BLMP",		OK, "http://www.hojerteknik.com/winnet.htm", "Used in the IGEL WinNET III thin client."),
	B("ASRock",	"775i65G",		OK, "http://www.asrock.com/mb/overview.asp?Model=775i65G", NULL),
	B("ASRock",	"880G Pro3",		OK, "http://www.asrock.com/mb/overview.asp?Model=880G%20Pro3", NULL),
	B("ASRock",	"890GX Extreme3",	OK, "http://www.asrock.com/mb/overview.asp?Model=890GX%20Extreme3", NULL),
	B("ASRock",	"939A785GMH/128M",	OK, "http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M", NULL),
	B("ASRock",	"A330GC",		OK, "http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL),
	B("ASRock",	"A770CrossFire",	OK, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire", NULL),
	B("ASRock",	"A780FullHD",		OK, "http://www.asrock.com/mb/overview.asp?Model=A780FullHD", "While flashrom is working correctly, there might be problems with the firmware images themselves. Please see http://www.flashrom.org/pipermail/flashrom/2012-July/009600.html for details."),
	B("ASRock",	"ALiveNF6G-DVI",	OK, "http://www.asrock.com/mb/overview.asp?Model=ALiveNF6G-DVI", NULL),
	B("ASRock",	"AM2NF6G-VSTA",		OK, "http://www.asrock.com/mb/overview.asp?Model=AM2NF6G-VSTA", NULL),
	B("ASRock",	"ConRoeXFire-eSATA2",	OK, "http://www.asrock.com/mb/overview.asp?model=conroexfire-esata2", NULL),
	B("ASRock",	"H61M-ITX",		BAD, "http://www.asrock.com/mb/overview.asp?Model=H61M-ITX", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("ASRock",	"H67M",			BAD, "http://www.asrock.com/mb/overview.asp?Model=H67M", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("ASRock",	"K7S41",		OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41", NULL),
	B("ASRock",	"K7S41GX",		OK, "http://www.asrock.com/mb/overview.asp?Model=K7S41GX", NULL),
	B("ASRock",	"K7VT4A+",		BAD, "http://www.asrock.com/mb/overview.asp?Model=K7VT4A%2b", "No chip found, probably due to flash translation. http://www.flashrom.org/pipermail/flashrom/2009-August/000393.html"),
	B("ASRock",	"K8S8X",		OK, "http://www.asrock.com/mb/overview.asp?Model=K8S8X", NULL),
	B("ASRock",	"M3A790GXH/128M",	OK, "http://www.asrock.com/mb/overview.asp?Model=M3A790GXH/128M", NULL),
	B("ASRock",	"N61P-S",		OK, "http://www.asrock.com/mb/overview.asp?Model=N61P-S", NULL),
	B("ASRock",	"P4i65GV",		OK, "http://www.asrock.com/mb/overview.asp?Model=P4i65GV", NULL),
	B("ASUS",	"A7N8X Deluxe",		OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8X_Deluxe/", NULL),
	B("ASUS",	"A7N8X-E Deluxe",	OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XE_Deluxe/", NULL),
	B("ASUS",	"A7N8X-VM/400",		OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7N8XVM400/", NULL),
	B("ASUS",	"A7V133",		OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/kt133a/a7v133/", NULL),
	B("ASUS",	"A7V333",		OK, "ftp://ftp.asus.com.tw/pub/asus/mb/socka/kt333/a7v333/", NULL),
	B("ASUS",	"A7V400-MX",		OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V400MX/", NULL),
	B("ASUS",	"A7V600-X",		OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V600X/", NULL),
	B("ASUS",	"A7V8X",		OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8X/", NULL),
	B("ASUS",	"A7V8X-MX",		OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX/", NULL),
	B("ASUS",	"A7V8X-MX SE",		OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XMX_SE/", NULL),
	B("ASUS",	"A7V8X-X",		OK, "http://www.asus.com/Motherboards/AMD_Socket_A/A7V8XX/", NULL),
	B("ASUS",	"A8M2N-LA (NodusM3-GL8E)", OK, "http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00757531&cc=us&dlc=en&lc=en", "This is an OEM board from HP, the HP name is NodusM3-GL8E."),
	B("ASUS",	"A8N-E",		OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/", NULL),
	B("ASUS",	"A8N-LA (Nagami-GL8E)",	OK, "http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&dlc=en", "This is an OEM board from HP, the HP name is Nagami-GL8E."),
	B("ASUS",	"A8N-SLI",		OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/", NULL),
	B("ASUS",	"A8N-SLI Deluxe",	NT, NULL, "Should work out of the box since r1593."),
	B("ASUS",	"A8N-SLI Premium",	OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI_Premium/", NULL),
	B("ASUS",	"A8N-VM",		OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM/", NULL),
	B("ASUS",	"A8N-VM CSM",		OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM_CSM/", NULL),
	B("ASUS",	"A8NE-FM/S",		OK, "http://www.hardwareschotte.de/hardware/preise/proid_1266090/preis_ASUS+A8NE-FM", NULL),
	B("ASUS",	"A8V Deluxe",		OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8V_Deluxe/", NULL),
	B("ASUS",	"A8V-E Deluxe",		OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_Deluxe/", NULL),
	B("ASUS",	"A8V-E SE",		OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8VE_SE/", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html"),
	B("ASUS",	"Crosshair II Formula",	OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/Crosshair_II_Formula/", NULL),
	B("ASUS",	"Crosshair IV Extreme",	OK, "http://www.asus.com/Motherboards/AMD_AM3/Crosshair_IV_Extreme/", NULL),
	B("ASUS",	"E35M1-I DELUXE",	OK, "http://www.asus.com/Motherboards/AMD_CPU_on_Board/E35M1I_DELUXE/", NULL),
	B("ASUS",	"K8N",			OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8N/", NULL),
	B("ASUS",	"K8V",			OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V/", NULL),
	B("ASUS",	"K8V SE Deluxe",	OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8V_SE_Deluxe/", NULL),
	B("ASUS",	"K8V-X",		OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX/", NULL),
	B("ASUS",	"K8V-X SE",		OK, "http://www.asus.com/Motherboards/AMD_Socket_754/K8VX_SE/", NULL),
	B("ASUS",	"KFSN4-DRE/SAS",	OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/KFSN4DRESAS/", NULL),
	B("ASUS",	"M2A-MX",		OK, "http://www.asus.com/Motherboards/AMD_AM2/M2AMX/", NULL),
	B("ASUS",	"M2A-VM (HDMI)",	OK, "http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", NULL),
	B("ASUS",	"M2N32-SLI Deluxe",	OK, "http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/", NULL),
	B("ASUS",	"M2N68-VM",		OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M2N68VM/", NULL),
	B("ASUS",	"M2N-E",		OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"),
	B("ASUS",	"M2N-E SLI",		OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL),
	B("ASUS",	"M2N-SLI Deluxe",	OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL),
	B("ASUS",	"M2NBP-VM CSM",		OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL),
	B("ASUS",	"M2NPV-VM",		OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NPVVM/", NULL),
	B("ASUS",	"M2V",			OK, "http://www.asus.com/Motherboards/AMD_AM2/M2V/", NULL),
	B("ASUS",	"M2V-MX",		OK, "http://www.asus.com/Motherboards/AMD_AM2/M2VMX/", NULL),
	B("ASUS",	"M3A",			OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A/", NULL),
	B("ASUS",	"M3A76-CM",		OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A76CM/", NULL),
	B("ASUS",	"M3A78-EM",		OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL),
	B("ASUS",	"M3N78 PRO",		OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78_PRO/", NULL),
	B("ASUS",	"M3N78-VM",		OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL),
	B("ASUS",	"M4A78-EM",		OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL),
	B("ASUS",	"M4A785T-M",		OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TM/", NULL),
	B("ASUS",	"M4A785TD-M EVO",	OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL),
	B("ASUS",	"M4A785TD-V EVO",	OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL),
	B("ASUS",	"M4A78LT-M LE",		OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL),
	B("ASUS",	"M4A79T Deluxe",	OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL),
	B("ASUS",	"M4A87TD/USB3",		OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL),
	B("ASUS",	"M4A89GTD PRO",		OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A89GTD_PRO/", NULL),
	B("ASUS",	"M4N68T V2",		OK, "http://www.asus.com/Motherboards/AMD_AM3/M4N68T_V2/", NULL),
	B("ASUS",	"M4N78 PRO",		OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4N78_PRO/", NULL),
	B("ASUS",	"M5A78L-M LX",		OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A78LM_LX/", "The MAC address of the onboard LAN NIC is stored in flash, hence overwritten by flashrom; see http://www.flashrom.org/pipermail/flashrom/2012-May/009200.html"),
	B("ASUS",	"M5A99X EVO",		OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/M5A99X_EVO/", NULL),
	B("ASUS",	"Maximus IV Extreme",	BAD, "http://www.asus.com/Motherboards/Intel_Socket_1155/Maximus_IV_Extreme/", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("ASUS",	"MEW-AM",		BAD, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock370/810/mew-am/", "No public report found. Owned by Uwe Hermann <uwe@hermann-uwe.de>. May work now."),
	B("ASUS",	"MEW-VM",		BAD, "http://www.elhvb.com/mboards/OEM/HP/manual/ASUS%20MEW-VM.htm", "No public report found. Owned by Uwe Hermann <uwe@hermann-uwe.de>. May work now."),
	B("ASUS",	"OPLX-M",		NT, NULL, "Untested board enable."),
	B("ASUS",	"P2B",			OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b/", NULL),
	B("ASUS",	"P2B-D",		OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL),
	B("ASUS",	"P2B-DS",		OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-ds/", NULL),
	B("ASUS",	"P2B-F",		OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-d/", NULL),
	B("ASUS",	"P2B-N",		OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p2b-n/", NULL),
	B("ASUS",	"P2E-M",		OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440ex/p2e-m/", NULL),
	B("ASUS",	"P2L97-S",		OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440lx/p2l97-s/", NULL),
	B("ASUS",	"P3B-F",		BAD, "ftp://ftp.asus.com.tw/pub/ASUS/mb/slot1/440bx/p3b-f/", "No public report found. Owned by Uwe Hermann <uwe@hermann-uwe.de>. May work now."),
	B("ASUS",	"P4B266",		OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b266/", NULL),
	B("ASUS",	"P4B266-LM",		OK, "http://esupport.sony.com/US/perl/swu-list.pl?mdl=PCVRX650", NULL),
	B("ASUS",	"P4B533-E",		OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4b533-e/", NULL),
	B("ASUS",	"P4C800-E Deluxe",	OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4C800E_Deluxe/", NULL),
	B("ASUS",	"P4GV-LA (Guppy)",	OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00363478", NULL),
	B("ASUS",	"P4P800",		OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800/", NULL),
	B("ASUS",	"P4P800-E Deluxe",	OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800E_Deluxe/", NULL),
	B("ASUS",	"P4P800-VM",		OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4P800VM/", NULL),
	B("ASUS",	"P4S533-X",		OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4s533-x/", NULL),
	B("ASUS",	"P4S800-MX",		OK, "http://www.asus.com/Motherboards/Intel_Socket_478/P4S800MX/", NULL),
	B("ASUS",	"P4SC-E",		OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock478/p4sc-e/", "Part of ASUS Terminator P4 533 barebone system"),
	B("ASUS",	"P4SD-LA",		OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00022505", NULL),
	B("ASUS",	"P5A",			OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/", NULL),
	B("ASUS",	"P5B",			OK, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B/", NULL),
	B("ASUS",	"P5B-Deluxe",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5B_Deluxe/", NULL),
	B("ASUS",	"P5BV-M",		BAD, "ftp://ftp.asus.com.tw/pub/ASUS/mb/socket775/P5B-VM/", "Reported by Bernhard M. Wiedemann <bernhard@uml12d.zq1.de> to flashrom@coreboot.org, no public archive. Missing board enable and/or SST49LF008A unlocking. May work now."),
	B("ASUS",	"P5BV-R",		OK, "http://www.asus.com/Server_Workstation/Servers/RS120E5PA2/", "Used in RS120-E5/PA2 servers."),
	B("ASUS",	"P5GC-MX/1333",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GCMX1333/", NULL),
	B("ASUS",	"P5GD1 Pro",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD1_PRO/", NULL),
	B("ASUS",	"P5GD1-VM/S",		OK, NULL, "This is an OEM board from FSC. Although flashrom supports it and can probably not distinguish it from the P5GD1-VM, please note that the P5GD1-VM BIOS does not support the FSC variants completely."),
	B("ASUS",	"P5GD1(-VM)",		NT, NULL, "Untested board enable."),
	B("ASUS",	"P5GD2 Premium",	OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD2_Premium/", NULL),
	B("ASUS",	"P5GD2-X",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GD2X/", NULL),
	B("ASUS",	"P5GDC Deluxe",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDC_Deluxe/", NULL),
	B("ASUS",	"P5GDC-V Deluxe",	OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5GDCV_Deluxe/", NULL),
	B("ASUS",	"P5GD2/C variants",	NT, NULL, "Untested board enable."),
	B("ASUS",	"P5K-V",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KV/", NULL),
	B("ASUS",	"P5K-VM",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KVM/", NULL),
	B("ASUS",	"P5KC",			OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KC/", NULL),
	B("ASUS",	"P5KPL-CM",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5KPLCM/", NULL),
	B("ASUS",	"P5L-MX",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LMX/", NULL),
	B("ASUS",	"P5L-VM 1394",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5LVM_1394/", NULL),
	B("ASUS",	"P5LD2",		NT, NULL, "Untested board enable."),
	B("ASUS",	"P5LP-LE (Lithium-UL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00379616&tmp_task=prodinfoCategory&cc=us&dlc=en&lc=en&product=1159887", "This is an OEM board from HP."),
	B("ASUS",	"P5LP-LE (Epson OEM)",	OK, NULL, "This is an OEM board from Epson (e.g. Endeavor MT7700)."),
	B("ASUS",	"P5LP-LE",		NT, NULL, "This designation is used for OEM boards from HP, Epson and maybe others. The HP names vary and not all of them have been tested yet. Please report any success or failure, thanks."),
	B("ASUS",	"P5N-E SLI",		NT, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Untested board enable"),
	B("ASUS",	"P5N-D",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND/", NULL),
	B("ASUS",	"P5N-E SLI",		NT, "http://www.asus.com/Motherboards/Intel_Socket_775/P5NE_SLI/", "Untested board enable."),
	B("ASUS",	"P5N32-E SLI",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N32E_SLI/", NULL),
	B("ASUS",	"P5N7A-VM",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5N7AVM/", NULL),
	B("ASUS",	"P5ND2-SLI Deluxe",	OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5ND2SLI_Deluxe/", NULL),
	B("ASUS",	"P5PE-VM",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5PEVM/", NULL),
	B("ASUS",	"P5QPL-AM",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5QPLAM/", NULL),
	B("ASUS",	"P5VD1-X",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5VD1X/", NULL),
	B("ASUS",	"P5VD2-MX",		OK, "http://www.asus.com/Motherboards/Intel_Socket_775/P5VD2MX/", "The MAC address of the onboard LAN NIC is stored in flash, hence overwritten by flashrom; see http://www.flashrom.org/pipermail/flashrom/2012-March/009014.html"),
	B("ASUS",	"P6T SE",		OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_SE/", NULL),
	B("ASUS",	"P6T Deluxe",		OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe/", NULL),
	B("ASUS",	"P6T Deluxe V2",	OK, "http://www.asus.com/Motherboards/Intel_Socket_1366/P6T_Deluxe_V2/", NULL),
	B("ASUS",	"P7H57D-V EVO",		OK, "http://www.asus.com/Motherboards/Intel_Socket_1156/P7H57DV_EVO/", NULL),
	B("ASUS",	"P7H55-M LX",		BAD, NULL, "flashrom works correctly, but GbE LAN is nonworking (probably due to a missing/bogus MAC address; see http://www.flashrom.org/pipermail/flashrom/2011-July/007432.html and http://ubuntuforums.org/showthread.php?t=1534389 for a possible workaround)"),
	B("ASUS",	"P8B-E/4L",		BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("ASUS",	"P8B WS",		BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("ASUS",	"P8H61 PRO",		BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("ASUS",	"P8H61-M LE/USB3",	BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("ASUS",	"P8H67-M PRO",		BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("ASUS",	"P8P67 (rev. 3.1)",	BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("ASUS",	"P8P67 LE",		BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("ASUS",	"P8P67 PRO (rev. 3.0)",	OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8P67_PRO/", NULL),
	B("ASUS",	"P8Z68-V",		OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V/", "Warning: MAC address of LOM is stored at 0x1000 - 0x1005 of the image."),
	B("ASUS",	"P8Z68-V PRO",		BAD, NULL, "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("ASUS",	"P8Z68-V PRO/GEN3",	OK, "http://www.asus.com/Motherboards/Intel_Socket_1155/P8Z68V_PROGEN3/", "Warning: MAC address of LOM is stored at 0x1000 - 0x1005 of the image."),
	B("ASUS",	"SABERTOOTH 990FX",	OK, "http://www.asus.com/Motherboards/AMD_AM3Plus/SABERTOOTH_990FX/", NULL),
	B("ASUS",	"TUSL2-C",		NT, "http://support.asus.com/download.aspx?SLanguage=en&p=1&s=4&m=TUSL2-C&os=&hashedid=n/a", "Untested board enable."),
	B("ASUS",	"Z8NA-D6C",		OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/", NULL),
	B("ASUS",	"Z8PE-D12",		OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/", NULL),
	B("Bachmann",	"OT200",		OK, "http://www.bachmann.info/produkte/bedien-und-beobachtungsgeraete/operator-terminals/", NULL),
	B("BCOM",	"WinNET100",		OK, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."),
	B("Bifferos",	"Bifferboard",		OK, "http://bifferos.co.uk/", NULL),
	B("Biostar",	"H61MU3",		BAD, NULL, "Probing works (Eon EN25Q32(A/B), 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("Biostar",	"M6TBA",		BAD, "ftp://ftp.biostar-usa.com/manuals/M6TBA/", "No public report found. Owned by Uwe Hermann <uwe@hermann-uwe.de>. May work now."),
	B("Biostar",	"M7NCD Pro",		OK, "http://www.biostar.com.tw/app/en/mb/content.php?S_ID=260", NULL),
	B("Biostar",	"M7VIQ",		NT, NULL, NULL),
	B("Biostar",	"N61PB-M2S",		OK, NULL, NULL),
	B("Biostar",	"N68S3+",		OK, NULL, NULL),
	B("Biostar",	"P4M80-M4",		OK, "http://www.biostar-usa.com/mbdetails.asp?model=p4m80-m4", NULL),
	B("Biostar",	"TA780G M2+",		OK, "http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344", NULL),
	B("Boser",	"HS-6637",		BAD, "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", "Reported by Mark Robinson <mark@zl2tod.net> to flashrom@coreboot.org, no public archive. Missing board enable and/or F29C51002T unlocking. May work now."),
	B("Congatec",	"conga-X852",		OK, "http://www.congatec.com/single_news+M57715f6263d.html?&L=1", NULL),
	B("Dell",	"Inspiron 580",		BAD, "http://support.dell.com/support/edocs/systems/insp580/en/index.htm", "Probing works (Macronix MX25L6405, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."),
	B("Dell",	"OptiPlex GX1",		OK, "http://support.dell.com/support/edocs/systems/ban_gx1/en/index.htm", NULL),
	B("Dell",	"PowerEdge 1850",	OK, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL),
	B("Dell",	"Vostro 460",		BAD, "http://support.dell.com/support/edocs/systems/vos460/en/index.htm", "Mainboard model is 0Y2MRG. Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."),
	B("DFI",	"855GME-MGF",		BAD, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?action=e&downloadType=&windowstate=normal&mode=view&downloadFlag=false&itemId=433", "Probably needs a board enable. http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"),
	B("DFI",	"AD77",			NT, NULL, "Untested board enable."),
	B("DFI",	"Blood-Iron P35 T2RL",	OK, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?itemId=516&downloadFlag=false&action=1", NULL),
	B("Elitegroup",	"GeForce6100SM-M ",	OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=685&MenuID=24", NULL),
	B("Elitegroup", "GF7100PVT-M3 (V1.0)",	OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=853&CategoryID=1&DetailName=Specification&MenuID=24&LanID=0", NULL),
	B("Elitegroup", "GF8200A",		OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=873&CategoryID=1&MenuID=20&LanID=0", NULL),
	B("Elitegroup",	"K7S5A",		OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&CategoryID=1&DetailName=Specification&MenuID=1&LanID=0", NULL),
	B("Elitegroup",	"K7S6A",		OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&CategoryID=1&DetailName=Specification&MenuID=52&LanID=0", NULL),
	B("Elitegroup", "K7SEM (V1.0A)",	OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=229&CategoryID=1&DetailName=Specification&MenuID=24&LanID=0", NULL),
	B("Elitegroup",	"K7VTA3",		OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=264&CategoryID=1&DetailName=Specification&MenuID=52&LanID=0", NULL),
	B("Elitegroup",	"P4M800PRO-M (V1.0A, V2.0)", OK, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?CategoryID=1&DetailID=574&DetailName=Feature&MenuID=52&LanID=0", NULL),
	B("Elitegroup", "P4VXMS (V1.0A)",	OK, NULL, NULL),
	B("Elitegroup",	"P6IWP-Fe",		OK, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?CategoryID=1&TypeID=3&DetailID=95&DetailName=Feature&MenuID=1&LanID=0", NULL),
	B("Elitegroup",	"P6VAP-A+",		OK, "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&CategoryID=1&DetailName=Specification&MenuID=1&LanID=0", NULL),
	B("Elitegroup", "RS485M-M",		OK, "http://www.ecs.com.tw/ECSWebSite_2007/Products/ProductsDetail.aspx?CategoryID=1&DetailID=654&DetailName=Feature&MenuID=1&LanID=0", NULL),
	B("Emerson",	"ATCA-7360",		OK, "http://www.emerson.com/sites/Network_Power/en-US/Products/Product_Detail/Product1/Pages/EmbCompATCA-7360.aspx", NULL),
	B("EPoX",	"EP-3PTA",		BAD, NULL, "Missing board enable (W83627HF/F/HG/G), see http://www.flashrom.org/pipermail/flashrom/2012-April/009043.html"),
	B("EPoX",	"EP-8K5A2",		OK, "http://www.epox.com/product.asp?ID=EP-8K5A2", NULL),
	B("EPoX",	"EP-8NPA7I",		OK, "http://www.epox.com/product.asp?ID=EP-8NPA7I", NULL),
	B("EPoX",	"EP-8RDA3+",		OK, "http://www.epox.com/product.asp?ID=EP-8RDA3plus", NULL),
	B("EPoX",	"EP-9NPA7I",		OK, "http://www.epox.com/product.asp?ID=EP-9NPA7I", NULL),
	B("EPoX",	"EP-BX3",		OK, "http://www.epox.com/product.asp?ID=EP-BX3", NULL),
	B("EVGA",	"132-CK-NF78",		OK, "http://www.evga.com/articles/385.asp", NULL),
	B("EVGA",	"270-WS-W555-A2 (Classified SR-2)", OK, "http://www.evga.com/products/moreInfo.asp?pn=270-WS-W555-A2", NULL),
	B("FIC",	"VA-502",		BAD, "ftp://ftp.fic.com.tw/motherboard/manual/socket7/va-502/", "No public report found. Owned by Uwe Hermann <uwe@hermann-uwe.de>. Seems the PCI subsystem IDs are identical with the Tekram P6Pro-A5. May work now."),
	B("Foxconn",	"6150K8MD-8EKRSH",	OK, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=en-us0000157", NULL),
	B("Foxconn",	"A6VMX",		OK, "http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=en-us0000346", NULL),
	B("Foxconn",	"P4M800P7MA-RS2",	OK, "http://www.foxconnchannel.com/Product/Motherboards/detail_overview.aspx?id=en-us0000138", NULL),
	B("Freetech",	"P6F91i",		OK, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F91i.html", NULL),
	B("Fujitsu-Siemens", "ESPRIMO P5915",	OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRIMO/P/EsprimoP5915-6.htm", "Mainboard model is D2312-A2."),
	B("Fujitsu-Siemens", "CELSIUS W410",	BAD, "ftp://ftp.ts.fujitsu.com/pub/mainboard-oem-sales/Products/Mainboards/Industrial&ExtendedLifetime/D3061&D3062/", "Mainboard model is D3062-A1. Probing works (Macronix MX25L6405, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."),
	B("GIGABYTE",	"GA-2761GXDK",		OK, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gigabyte_dtx-mainboard/", NULL),
	B("GIGABYTE",	"GA-6BXC",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL),
	B("GIGABYTE",	"GA-6BXDU",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL),
	B("GIGABYTE",	"GA-6IEM",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1379", NULL),
	B("GIGABYTE",	"GA-6VXE7+",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2410", NULL),
	B("GIGABYTE",	"GA-6ZMA",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1541", NULL),
	B("GIGABYTE",	"GA-MA785GMT-UD2H (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3156", NULL),
	B("GIGABYTE",	"GA-770TA-UD3",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3272", NULL),
	B("GIGABYTE",	"GA-7DXR",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1302", NULL),
	B("GIGABYTE",	"GA-7VT600",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1666", NULL),
	B("GIGABYTE",	"GA-7ZM",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1366", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."),
	B("GIGABYTE",	"GA-880GMA-USB3 (rev. 3.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3817", NULL),
	B("GIGABYTE",	"GA-8I945GZME-RH",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2304", NULL),
	B("GIGABYTE",	"GA-8IP775",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL),
	B("GIGABYTE",	"GA-8IRML",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL),
	B("GIGABYTE",	"GA-8PE667 Ultra 2",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL),
	B("GIGABYTE",	"GA-8SIMLH",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL),
	B("GIGABYTE",	"GA-945PL-S3P (rev. 6.6)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2541", NULL),
	B("GIGABYTE",	"GA-965GM-S2 (rev. 2.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL),
	B("GIGABYTE",	"GA-965P-DS4",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL),
	B("GIGABYTE",	"GA-EP31-DS3L (rev. 2.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2964", NULL),
	B("GIGABYTE",	"GA-EP35-DS3L",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL),
	B("GIGABYTE",	"GA-H61M-D2-B3",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3773", NULL),
	B("GIGABYTE",	"GA-H61M-D2H-USB3",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4004", NULL),
	B("GIGABYTE",	"GA-EX58-UD4P",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL),
	B("GIGABYTE",	"GA-K8N-SLI",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL),
	B("GIGABYTE",	"GA-K8N51GMF",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL),
	B("GIGABYTE",	"GA-K8N51GMF-9",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL),
	B("GIGABYTE",	"GA-K8NS Pro-939",	NT, "http://www.gigabyte.com/products/product-page.aspx?pid=1875", "Untested board enable."),
	B("GIGABYTE",	"GA-M57SLI-S4",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL),
	B("GIGABYTE",	"GA-M61P-S3",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL),
	B("GIGABYTE",	"GA-M720-US3",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3006", NULL),
	B("GIGABYTE",	"GA-MA69VM-S2",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2500", NULL),
	B("GIGABYTE",	"GA-MA74GM-S2H (rev. 3.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3152", NULL),
	B("GIGABYTE",	"GA-MA770-UD3 (rev. 2.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3302", NULL),
	B("GIGABYTE",	"GA-MA770T-UD3P",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3096", NULL),
	B("GIGABYTE",	"GA-MA780G-UD3H",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3004", NULL),
	B("GIGABYTE",	"GA-MA78G-DS3H (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2800", NULL),
	B("GIGABYTE",	"GA-MA78GM-S2H",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2758", NULL), /* TODO: Rev. 1.BAD, 1.OK, or 2.x? */
	B("GIGABYTE",	"GA-MA78GPM-DS2H",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2859", NULL),
	B("GIGABYTE",	"GA-MA790FX-DQ6",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2690", NULL),
	B("GIGABYTE",	"GA-MA790GP-DS4H",	OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2887", NULL),
	B("GIGABYTE",	"GA-MA790XT-UD4P (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3010", NULL),
	B("GIGABYTE",	"GA-P55A-UD4 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3436", NULL),
	B("GIGABYTE",	"GA-P67A-UD3P",		OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL),
	B("GIGABYTE",	"GA-X58A-UD7 (rev. 2.0)", OK, NULL, NULL),
	B("GIGABYTE",	"GA-X58A-UDR3 (rev. 2.0)", OK, NULL, NULL),
	B("GIGABYTE",	"GA-Z68MX-UD2H-B (rev. 1.3)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3854", NULL),
	B("GIGABYTE",	"GA-Z68XP-UD3 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3892", NULL),
	B("HP",		"8100 Elite CMT PC (304Bh)", BAD, NULL, "SPI lock down, PR, read-only descriptor, locked ME region."),
	B("HP",		"e-Vectra P2706T",	OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodSeriesId=77515&prodTypeId=12454", NULL),
	B("HP",		"ProLiant DL145 G3",	OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00816835&lang=en&cc=us&taskId=101&prodSeriesId=3219755&prodTypeId=15351", NULL),
	B("HP",		"ProLiant DL165 G6",	OK, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-3328421-3955644.html", NULL),
	B("HP",		"ProLiant N40L",	OK, NULL, NULL),
	B("HP",		"Puffer2-UL8E",		OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00300023", NULL),
	B("HP",		"dc7800",		BAD, "http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/12454-12454-64287-321860-3328898-3459241.html?dnr=1", "ICH9DO with SPI lock down, BIOS lock, PR, read-only descriptor, locked ME region."),
	B("HP",		"Vectra VL400",		OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00060658&lang=en&cc=us", NULL),
	B("HP",		"Vectra VL420 SFF",	OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00060661&lang=en&cc=us", NULL),
	B("HP",		"xw4400 (0A68h)",	BAD, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00775230", "ICH7 with SPI lock down, BIOS lock, flash block detection (SST25VF080B); see http://paste.flashrom.org/view.php?id=686"),
	B("HP",		"xw6400",		BAD, NULL, "No chip found, see http://www.flashrom.org/pipermail/flashrom/2012-March/009006.html"),
	B("HP",		"xw9300",		BAD, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=459226", "Missing board enable, see http://www.flashrom.org/pipermail/flashrom/2012-February/008862.html"),
	B("HP",		"xw9400",		OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodSeriesId=3211286&prodTypeId=12454", "Boot block is write protected unless the solder points next to F2 are shorted."),
	B("HP",		"Z400 Workstation (0AE4h)", BAD, NULL, "ICH10R with BIOS lock enable and a protected range PRBAD, see http://www.flashrom.org/pipermail/flashrom/2012-June/009350.html"),
	B("IBASE",	"MB899",		OK, "http://www.ibase-i.com.tw/2009/mb899.html", NULL),
	B("IBM",	"x3455",		OK, "http://www-03.ibm.com/systems/x/hardware/rack/x3455/index.html", NULL),
	B("IEI",	"PICOe-9452",		OK, "http://www.ieiworld.com/product_groups/industrial/content.aspx?keyword=WSB&gid=00001000010000000001&cid=08125380291060861658&id=08142308605814597144", NULL),
	B("Intel",	"D201GLY",		OK, "http://www.intel.com/support/motherboards/desktop/d201gly/index.htm", NULL),
	B("Intel",	"D425KT",		BAD, "http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-board-d425kt.html", "NM10 with SPI lock down, BIOS lock, see http://www.flashrom.org/pipermail/flashrom/2012-January/008600.html"),
	B("Intel",	"D865GLC",		BAD, NULL, "ICH5 with BIOS lock enable, see http://paste.flashrom.org/view.php?id=775"),
	B("Intel",	"DG45ID",		BAD, "http://www.intel.com/products/desktop/motherboards/dg45id/dg45id-overview.htm", "Probing works (Winbond W25x32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."),
	B("Intel",	"DQ965GF",		BAD, NULL, "Probing enables Hardware Sequencing (behind that hides a SST SST25VF016B, 2048 kB). Parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked (and the platform data region seems to be bogus)."),
	B("Intel",	"DG965OT",		BAD, NULL, "Probing enables Hardware Sequencing (behind that hides a SST SST25VF080B, 1024 kB). Parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked (and the platform data region seems to be bogus)."),
	B("Intel",	"DH61AG ",		BAD, NULL, "H61 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2012-June/009417.html"),
	B("Intel",	"DH67CF",		BAD, NULL, "H67 with BIOS lock enable and locked ME region, see http://www.flashrom.org/pipermail/flashrom/2011-September/007789.html"),
	B("Intel",	"DN2800MT (Marshalltown)", BAD, NULL, "BIOS locked via BIOS_CNTL."),
	B("Intel",	"EP80759",		OK, NULL, NULL),
	B("Intel",	"Foxhollow",		OK, NULL, "Intel reference board."),
	B("Intel",	"Greencity",		OK, NULL, "Intel reference board."),
	B("Intel",	"SE440BX-2",		BAD, "http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Discontinued+Motherboards&ProductProduct=Intel%C2%AE+SE440BX-2+Motherboard", "Probably won't work, see http://www.coreboot.org/pipermail/flashrom/2010-July/003952.html"),
	B("IWILL",	"DK8-HTX",		OK, "http://web.archive.org/web/20060507170150/http://www.iwill.net/product_2.asp?p_id=98", NULL),
	B("Jetway",	"J-7BXAN",		OK, "http://www.jetway.com.tw/evisn/download/d7BXAS.htm", NULL),
	B("Jetway",	"J7F4K1G5D-PB",		OK, "http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=282&proname=J7F4K1G5D", NULL),
	B("Kontron",	"986LCD-M",		OK, "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/miniitx+motherboards/986lcdmmitx.html", NULL),
	B("Lanner",	"EM-8510C",		OK, NULL, NULL),
	B("Lex",	"CV700A",		OK, "http://www.lex.com.tw/product/CV700A-spec.htm", NULL),
	B("Mitac",	"6513WU",		OK, "http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/products/tyan/6513wu/6513wu.htm", NULL),
	B("MSC",	"Q7-TCTC",		OK, "http://www.msc-ge.com/en/produkte/com/moduls/overview/5779-www.html", NULL),
	B("MSI",	"MS-6153",		OK, "http://www.msi.com/product/mb/MS-6153.html", NULL),
	B("MSI",	"MS-6156",		OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/boards/Motherboards/MicroStar/Ms6156/MS6156.htm", NULL),
	B("MSI",	"MS-6163 (MS-6163 Pro)",OK, "http://www.msi.com/product/mb/MS-6163-Pro.html", NULL),
	B("MSI",	"MS-6178",		BAD, "http://www.msi.com/product/mb/MS-6178.html", "Immediately powers off if you try to hot-plug the chip. However, this does '''not''' happen if you use coreboot. Owned by Uwe Hermann <uwe@hermann-uwe.de>."),
	B("MSI",	"MS-6330 (K7T Turbo)",	OK, "http://www.msi.com/product/mb/K7T-Turbo.html", NULL),
	B("MSI",	"MS-6391 (845 Pro4)",	OK, "http://www.msi.com/product/mb/845-Pro4.html", NULL),
	B("MSI",	"MS-6561 (745 Ultra)",	OK, "http://www.msi.com/product/mb/745-Ultra.html", NULL),
	B("MSI",	"MS-6566 (845 Ultra-C)",OK, "http://www.msi.com/product/mb/845-Ultra-C.html", NULL),
	B("MSI",	"MS-6570 (K7N2)",	OK, "http://www.msi.com/product/mb/K7N2.html", NULL),
	B("MSI",	"MS-6577 (Xenon)",	OK, "http://h10025.www1.hp.com/ewfrf/wc/document?product=90390&lc=en&cc=us&dlc=en&docname=bph07843", "This is an OEM board from HP, the HP name is Xenon."),
	B("MSI",	"MS-6590 (KT4 Ultra)",	OK, "http://www.msi.com/product/mb/KT4-Ultra.html", NULL),
	B("MSI",	"MS-6702E (K8T Neo2-F)",OK, "http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html", NULL),
	B("MSI",	"MS-6712 (KT4V)",	OK, "http://www.msi.com/product/mb/KT4V---KT4V-L--v1-0-.html", NULL),
	B("MSI",	"MS-6787 (P4MAM-V/P4MAM-L)", OK, "http://www.msi.com/service/search/?kw=6787&type=product", NULL),
	B("MSI",	"MS-7005 (651M-L)",	OK, "http://www.msi.com/product/mb/651M-L.html", NULL),
	B("MSI",	"MS-7025 (K8N Neo2 Platinum)", OK, "http://www.msi.com/product/mb/K8N-Neo2-Platinum.html", NULL),
	B("MSI",	"MS-7046",		OK, "http://www.heimir.de/ms7046/", NULL),
	B("MSI",	"MS-7061 (KM4M-V/KM4AM-V)", OK, "http://www.msi.com/service/search/?kw=7061&type=product", NULL),
	B("MSI",	"MS-7065",		OK, "http://browse.geekbench.ca/geekbench2/view/53114", NULL),
	B("MSI",	"MS-7135 (K8N Neo3)",	OK, "http://www.msi.com/product/mb/K8N-Neo3.html", NULL),
	B("MSI",	"MS-7142 (K8MM-V)",	OK, "http://www.msi.com/product/mb/K8MM-V.html", NULL),
	B("MSI",	"MS-7168 (Orion)",	OK, "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform_honeymoon_istart", NULL),
	B("MSI",	"MS-7207 (K8NGM2-L)",	OK, "http://www.msi.com/product/mb/K8NGM2-FID--IL--L.html", NULL),
	B("MSI",	"MS-7211 (PM8M3-V)",	OK, "http://www.msi.com/product/mb/PM8M3-V.html", NULL),
	B("MSI",	"MS-7236 (945PL Neo3)",	OK, "http://www.msi.com/product/mb/945PL-Neo3.html", NULL),
	B("MSI",	"MS-7250 (K9N SLI (rev 2.1))", OK, "http://www.msi.com/product/mb/K9N--SLI.html", NULL),
	B("MSI",	"MS-7253 (K9VGM-V)",	OK, "http://www.msi.com/product/mb/K9VGM-V.html", NULL),
	B("MSI",	"MS-7255 (P4M890M)",	OK, "http://www.msi.com/product/mb/P4M890M-L-IL.html", NULL),
	B("MSI",	"MS-7260 (K9N Neo PCB 1.0)", BAD, "http://www.msi.com/product/mb/K9N-Neo--PCB-1-0-.html", "Interestingly flashrom does not work when the vendor BIOS is booted, but it ''does'' work flawlessly when the machine is booted with coreboot. Owned by Uwe Hermann <uwe@hermann-uwe.de>."),
	B("MSI",	"MS-7309 (K9N6PGM2-V2)", OK, "http://www.msi.com/product/mb/K9N6PGM2-V2.html", NULL),
	B("MSI",	"MS-7312 (K9MM-V)",	OK, "http://www.msi.com/product/mb/K9MM-V.html", NULL),
	B("MSI",	"MS-7345 (P35 Neo2-FIR)", OK, "http://www.msi.com/product/mb/P35-Neo2-FR---FIR.html", NULL),
	B("MSI",	"MS-7368 (K9AG Neo2-Digital)", OK, "http://www.msi.com/product/mb/K9AG-Neo2-Digital.html", NULL),
	B("MSI",	"MS-7369 (K9N Neo V2)", OK, "http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL),
	B("MSI",	"MS-7376 (K9A2 Platinum V1)", OK, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL),
	B("MSI",	"MS-7529 (G31M3-L(S) V2)", OK, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL),
	B("MSI",	"MS-7529 (G31TM-P21)",  OK, "http://www.msi.com/product/mb/G31TM-P21.html", NULL),
	B("MSI",	"MS-7548 (Aspen-GL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&dlc=en", NULL),
	B("MSI",	"MS-7596 (785GM-E51)",  OK, "http://www.msi.com/product/mb/785GM-E51.html", NULL),
	B("MSI",	"MS-7597 (GF615M-P33)",	BAD, NULL, "Missing board enable/SIO support (Fintek F71889), see http://www.flashrom.org/pipermail/flashrom/2012-March/008956.html"),
	B("MSI",	"MS-7599 (870-C45)",	OK, "http://www.msi.com/product/mb/870-C45.html", NULL),
	B("MSI",	"MS-7613 (Iona-GL8E)",	BAD, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02014355&lc=en&cc=dk&dlc=en&product=4348478", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("MSI",	"MS-7635 (H55M-ED55)",	BAD, "http://www.msi.com/product/mb/H55M-ED55.html", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("MSI",	"MS-7640 (890FXA-GD70)",OK, "http://www.msi.com/product/mb/890FXA-GD70.html", NULL),
	B("MSI",	"MS-7642 (890GXM-G65)",	OK, "http://www.msi.com/product/mb/890GXM-G65.html", NULL),
	B("MSI",	"MS-7676 (H67MA-ED55(B3))", OK, "http://www.msi.com/product/mb/H67MA-ED55--B3-.html", "Seems to work fine basically, but user reported (hopefully unrelated) buggy behavior of the board after a firmware upgrade. See http://www.flashrom.org/pipermail/flashrom/2012-January/008547.html"),
	B("MSI",	"MS-7676 (Z68MA-G45 (B3))", OK, "http://www.msi.com/product/mb/Z68MA-G45--B3-.html", NULL),
	B("MSI",	"MS-7696 (A75MA-G55)",	OK, "http://www.msi.com/product/mb/A75MA-G55.html", NULL),
	B("MSI",	"MS-7698 (E350IA-E45)",	OK, "http://www.msi.com/product/mb/E350IA-E45.html", NULL),
	B("MSI",	"MS-7740 (H61MA-E35(B3))",	OK, "http://www.msi.com/product/mb/H61MA-E35--B3-.html", NULL),
	B("NEC",	"PowerMate 2000",	OK, "http://support.necam.com/mobilesolutions/hardware/Desktops/pm2000/celeron/", NULL),
	B("Nokia",	"IP530",		OK, NULL, NULL),
	B("Palit",	"N61S",			OK, NULL, NULL),
	B("PCCHIPS ",	"M598LMR (V9.0)",	OK, NULL, NULL),
	B("PCCHIPS ",	"M863G (V5.1A)",	OK, "http://www.pcchips.com.tw/PCCWebSite/Products/ProductsDetail.aspx?CategoryID=1&DetailID=343&DetailName=Feature&MenuID=1&LanID=0", NULL),
	B("PC Engines",	"Alix.1c",		OK, "http://pcengines.ch/alix1c.htm", NULL),
	B("PC Engines",	"Alix.2c2",		OK, "http://pcengines.ch/alix2c2.htm", NULL),
	B("PC Engines",	"Alix.2c3",		OK, "http://pcengines.ch/alix2c3.htm", NULL),
	B("PC Engines",	"Alix.2d3",		OK, "http://pcengines.ch/alix2d3.htm", NULL),
	B("PC Engines",	"Alix.3c3",		OK, "http://pcengines.ch/alix3c3.htm", NULL),
	B("PC Engines",	"Alix.3d3",		OK, "http://pcengines.ch/alix3d3.htm", NULL),
	B("PC Engines",	"Alix.6f2",		OK, "http://pcengines.ch/alix6f2.htm", NULL),
	B("PC Engines",	"WRAP.2E",		OK, "http://pcengines.ch/wrap2e1.htm", NULL),
	B("Portwell",	"PEB-4700VLA",		OK, "http://www.portwell.com/products/detail.asp?CUSTCHAR1=PEB-4700VLA", NULL),
	B("RCA",	"RM4100",		OK, "http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL),
	B("Samsung",	"Polaris 32",		OK, NULL, NULL),
	B("Shuttle",	"AK31",			OK, "http://www.motherboard.cz/mb/shuttle/AK31.htm", NULL),
	B("Shuttle",	"AK38N",		OK, "http://eu.shuttle.com/en/desktopdefault.aspx/tabid-36/558_read-9889/", NULL),
	B("Shuttle",	"AV11V30",		OK, NULL, NULL),
	B("Shuttle",	"AV18E2",		OK, "http://www.shuttle.eu/_archive/older/de/av18.htm", NULL),
	B("Shuttle",	"FD37",			OK, "http://www.shuttle.eu/products/discontinued/barebones/sd37p2/", NULL),
	B("Shuttle",	"FH67",			OK, "http://www.shuttle.eu/products/mini-pc/sh67h3/specification/", NULL),
	B("Shuttle",	"FN25",			OK, "http://www.shuttle.eu/products/discontinued/barebones/sn25p/?0=", NULL),
	B("Shuttle",	"X50/X50(B)",		OK, "http://au.shuttle.com/product_detail_spec.jsp?PI=1241", NULL),
	B("Soyo",	"SY-5VD",		BAD, "http://www.soyo.com/content/Downloads/163/&c=80&p=464&l=English", "No public report found. Owned by Uwe Hermann <uwe@hermann-uwe.de>. May work now."),
	B("Soyo",	"SY-6BA+ III",		OK, "http://www.motherboard.cz/mb/soyo/SY-6BA+III.htm", NULL),
	B("Soyo",	"SY-7VCA",		OK, "http://www.tomshardware.com/reviews/12-socket-370-motherboards,196-15.html", NULL),
	B("Sun",	"Blade x6250",		OK, "http://www.sun.com/servers/blades/x6250/", NULL),
	B("Sun",	"Fire x4150",		BAD, "http://www.sun.com/servers/x64/x4150/", "No public report found. May work now."),
	B("Sun",	"Fire x4200",		BAD, "http://www.sun.com/servers/entry/x4200/", "No public report found. May work now."),
	B("Sun",	"Fire x4540",		BAD, "http://www.sun.com/servers/x64/x4540/", "No public report found. May work now."),
	B("Sun",	"Fire x4600",		BAD, "http://www.sun.com/servers/x64/x4600/", "No public report found. May work now."),
	B("Sun",	"Ultra 40 M2",		OK, "http://download.oracle.com/docs/cd/E19127-01/ultra40.ws/820-0123-13/intro.html", NULL),
	B("Supermicro",	"H8QC8",		OK, "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm", NULL),
	B("Supermicro", "X5DP8-G2",		OK, "http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm", NULL),
	B("Supermicro", "X7DBT-INF",		OK, "http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm", NULL),
	B("Supermicro", "X7SPA-HF",		OK, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&IPMI=Y", NULL),
	B("Supermicro", "X8DT3",		OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL),
	B("Supermicro", "X8DTE-F",		OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&SAS=N", NULL),
	B("Supermicro", "X8DTH-6F",		OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL),
	B("Supermicro",	"X8DTT-F",		OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-F.cfm", NULL),
	B("Supermicro",	"X8DTT-HIBQF",		OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTT-H.cfm", NULL),
	B("Supermicro",	"X8DTU-6TF+",		BAD, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU_.cfm?TYP=SAS&LAN=10", "Probing works (Atmel AT25DF321A, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("Supermicro",	"X8DTU-F",		OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm", NULL),
	B("Supermicro",	"X8SIE(-F)",		BAD, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI=N&TYP=LN2", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."),
	B("Supermicro",	"X8STi",		OK, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL),
	B("Supermicro",	"X9DR3-F",		BAD, "http://www.supermicro.com/products/motherboard/xeon/c600/x9dr3-f.cfm", "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("Supermicro",	"X9SCA-F",		BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCA-F.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("Supermicro",	"X9SCL",		BAD, "http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm", "Probing works (Winbond W25Q64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("T-Online",	"S-100",		OK, "http://wiki.freifunk-hannover.de/T-Online_S_100", NULL),
	B("Tekram",	"P6Pro-A5",		OK, "http://www.motherboard.cz/mb/tekram/P6Pro-A5.htm", NULL),
	B("Termtek",	"TK-3370 (Rev:2.5B)",	OK, NULL, NULL),
	B("Thomson",	"IP1000",		OK, "http://www.settoplinux.org/index.php?title=Thomson_IP1000", NULL),
	B("TriGem",	"Anaheim-3",		OK, "http://www.e4allupgraders.info/dir1/motherboards/socket370/anaheim3.shtml", NULL),
	B("TriGem",	"Lomita",		OK, "http://www.e4allupgraders.info/dir1/motherboards/socket370/lomita.shtml", NULL),
	B("Tyan",	"S1846 (Tsunami ATX)",	OK, "http://www.tyan.com/archive/products/html/tsunamiatx.html", NULL),
	B("Tyan",	"S2466 (Tiger MPX)",	OK, "http://www.tyan.com/product_board_detail.aspx?pid=461", NULL),
	B("Tyan",	"S2498 (Tomcat K7M)",	OK, "http://www.tyan.com/archive/products/html/tomcatk7m.html", NULL),
	B("Tyan",	"S2723 (Tiger i7501)",	OK, "http://www.tyan.com/archive/products/html/tigeri7501.html", NULL),
	B("Tyan",	"S2875 (Tiger K8W)",	OK, "http://www.tyan.com/archive/products/html/tigerk8w.html", NULL),
	B("Tyan",	"S2881 (Thunder K8SR)",	OK, "http://www.tyan.com/product_board_detail.aspx?pid=115", NULL),
	B("Tyan",	"S2882-D (Thunder K8SD Pro)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=127", NULL),
	B("Tyan",	"S2882 (Thunder K8S Pro)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=121", NULL),
	B("Tyan",	"S2891 (Thunder K8SRE)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=144", NULL),
	B("Tyan",	"S2892 (Thunder K8SE)",	OK, "http://www.tyan.com/product_board_detail.aspx?pid=145", NULL),
	B("Tyan",	"S2895 (Thunder K8WE)",	OK, "http://www.tyan.com/archive/products/html/thunderk8we.html", NULL),
	B("Tyan",	"S2912 (Thunder n3600R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=157", NULL),
	B("Tyan",	"S2915-E (Thunder n6650W)", OK, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=541&SKU=600000041", NULL),
	B("Tyan",	"S2915 (Thunder n6650W)", OK, "http://tyan.com/product_board_detail.aspx?pid=163", NULL),
	B("Tyan",	"S2933 (Thunder n3600S)", OK, "http://tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=478&SKU=600000063", NULL),
	B("Tyan",	"S3095 (Tomcat i945GM)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=181", NULL),
	B("Tyan",	"S3992 (Thunder h2000M)", OK, "http://tyan.com/product_board_detail.aspx?pid=235", NULL),
	B("Tyan",	"S5180 (Toledo i965R)",	OK, "http://www.tyan.com/product_board_detail.aspx?pid=456", NULL),
	B("Tyan",	"S5191 (Toledo i3000R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=343", NULL),
	B("Tyan",	"S5197 (Toledo i3010W)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=349", NULL),
	B("Tyan",	"S5211-1U (Toledo i3200R)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=593", NULL),
	B("Tyan",	"S5211 (Toledo i3210W)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=591", NULL),
	B("Tyan",	"S5220 (Toledo q35T)",	OK, "http://www.tyan.com/product_board_detail.aspx?pid=597", NULL),
	B("Tyan",	"S5375-1U (Tempest i5100X)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=610", NULL),
	B("Tyan",	"S5375 (Tempest i5100X)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=566", NULL),
	B("Tyan",	"S5376 (Tempest i5100W)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=605", "Both S5376G2NR and S5376WAG2NR should work."),
	B("Tyan",	"S5377 (Tempest i5100T)", OK, "http://www.tyan.com/product_SKU_spec.aspx?ProductType=MB&pid=642&SKU=600000017", NULL),
	B("Tyan",	"S5382 (Tempest i5000PW)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=439", NULL),
	B("Tyan",	"S5397 (Tempest i5400PW)", OK, "http://www.tyan.com/product_board_detail.aspx?pid=560", NULL),
	B("VIA",	"EPIA M/MII/...",	OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&motherboard_id=202", NULL), /* EPIA-MII link for now */
	B("VIA",	"EPIA SP",		OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&motherboard_id=261", NULL),
	B("VIA",	"EPIA-CN",		OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=400", NULL),
	B("VIA",	"EPIA EK",		OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?motherboard_id=420", NULL),
	B("VIA",	"EPIA-EX15000G",	OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&motherboard_id=450", NULL),
	B("VIA",	"EPIA-LN",		OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=473", NULL),
	B("VIA",	"EPIA-M700",		OK, "http://via.com.tw/servlet/downloadSvl?motherboard_id=670&download_file_id=3700", NULL),
	B("VIA",	"EPIA-N/NL",		OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&motherboard_id=221", NULL), /* EPIA-N link for now */
	B("VIA",	"EPIA-NX15000G",	OK, "http://www.via.com.tw/en/products/embedded/ProductDetail.jsp?productLine=1&motherboard_id=470", NULL),
	B("VIA",	"NAB74X0",		OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=590", NULL),
	B("VIA",	"pc2500e",		OK, "http://www.via.com.tw/en/initiatives/empowered/pc2500_mainboard/index.jsp", NULL),
	B("VIA",	"PC3500G",		OK, "http://www.via.com.tw/en/initiatives/empowered/pc3500_mainboard/index.jsp", NULL),
	B("VIA",	"VB700X",		OK, "http://www.via.com.tw/en/products/mainboards/motherboards.jsp?motherboard_id=490", NULL),
	B("ZOTAC",	"Fusion-ITX WiFi (FUSION350-A-E)", OK, NULL, NULL),
	B("ZOTAC",	"GeForce 8200",		OK, NULL, NULL),
	B("ZOTAC",	"H67-ITX WiFi (H67ITX-C-E)", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("ZOTAC",	"nForce 630i Supreme (N73U-Supreme)", OK, NULL, NULL),
	B("ZOTAC",	"ZBOX AD02 (PLUS)",	OK, NULL, NULL),
	B("ZOTAC",	"ZBOX HD-ID11",		OK, NULL, NULL),
#endif

	{0},
};

/* Please keep this list alphabetically ordered by vendor/board. */
const struct board_info laptops_known[] = {
#if defined(__i386__) || defined(__x86_64__)
	B("Acer",	"Aspire 1520",		OK, "http://support.acer.com/us/en/acerpanam/notebook/0000/Acer/Aspire1520/Aspire1520nv.shtml", NULL),
	B("Acer",	"Aspire One",		BAD, NULL, "http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html"),
	B("ASUS",	"A8Jm",			OK, NULL, NULL),
	B("ASUS",	"Eee PC 701 4G",	BAD, "http://www.asus.com/Eee/Eee_PC/Eee_PC_4G/", "It seems the chip (25X40VSIG) is behind some SPI flash translation layer (likely in the EC, the ENE KB3310)."),
	B("ASUS",	"M6Ne",			NT, "http://www.asus.com/Notebooks/Versatile_Performance/M6NNe/", "Untested board enable."),
	B("Clevo",	"P150HM",		BAD, "http://www.clevo.com.tw/en/products/prodinfo_2.asp?productid=307", "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."),
	B("Dell",	"Inspiron 1420",	OK, NULL, NULL),
	B("Dell",	"Latitude CPi A366XT",	BAD, "http://www.coreboot.org/Dell_Latitude_CPi_A366XT", "The laptop immediately powers off if you try to hot-swap the chip. It's not yet tested if write/erase would work on this laptop."),
	B("Dell",	"Vostro 3700",		BAD, NULL, "Locked ME, see http://www.flashrom.org/pipermail/flashrom/2012-May/009197.html."),
	B("Dell",	"Latitude E6520",	BAD, NULL, "Locked ME, see http://www.flashrom.org/pipermail/flashrom/2012-June/009420.html."),
	B("HP/Compaq",	"nx9005",		BAD, "http://h18000.www1.hp.com/products/quickspecs/11602_na/11602_na.HTML", "Shuts down when probing for a chip. http://www.flashrom.org/pipermail/flashrom/2010-May/003321.html"),
	B("HP/Compaq",	"nx9010",		BAD, "http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00348514", "Hangs upon '''flashrom -V''' (needs hard power-cycle then)."),
	B("IBM/Lenovo",	"Thinkpad T40p",	BAD, "http://www.thinkwiki.org/wiki/Category:T40p", NULL),
	B("IBM/Lenovo",	"Thinkpad T420",	BAD, "http://www.thinkwiki.org/wiki/Category:T420", "Probing works (Macronix MX25L6405, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs) and ME is locked. Also, a Protected Range is locking the top range of the BIOS region (presumably the boot block)."),
	B("IBM/Lenovo",	"Thinkpad T410s",	BAD, "http://www.thinkwiki.org/wiki/Category:T410s", "Probing works (Winbond W25X64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs) and ME is locked. Also, a Protected Range is locking the top range of the BIOS region (presumably the boot block)."),
	B("IBM/Lenovo",	"Thinkpad X1",		BAD, "http://www.thinkwiki.org/wiki/Category:X1", "Probing works (ST M25PX64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs) and ME is locked. Also, a Protected Range is locking the top range of the BIOS region (presumably the boot block)."),
	B("IBM/Lenovo",	"240",			BAD, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."),
	B("Lenovo",	"3000 V100 TF05Cxx",	OK, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3000Notebook&series=Lenovo+3000+V+Series#viewallmodelstop", NULL),
#endif

	{0},
};
#endif