So far, we have up to 4 different names for the same thing (ignoring capitalization)
CONFIG_FT2232SPI (makefile config option)
FT2232_SPI_SUPPORT (#define)
ft2232spi (programmer name)
ft2232_spi.c (programmer file)
Use CONFIG_* with underscores for makefile config options and #defines
and kill the useless _SUPPORT idiom.
Use lowercase names with underscores for programmer names and programmer
files.
With this, you can run "grep -i ft2232_spi" and find everything related
to the ft2232_spi driver. Same applies to all other programmers.
Corresponding to flashrom svn r1023.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
diff --git a/flashrom.8 b/flashrom.8
index 87dd69b..160b311 100644
--- a/flashrom.8
+++ b/flashrom.8
@@ -166,11 +166,11 @@
.sp
.BR "* it87spi" " (for flash ROMs behind an ITE IT87xx Super I/O LPC/SPI translation unit)"
.sp
-.BR "* ft2232spi" " (for flash ROMs attached to a FT2232H/FT4232H based USB SPI programmer)"
+.BR "* ft2232_spi" " (for flash ROMs attached to a FT2232H/FT4232H based USB SPI programmer)"
.sp
.BR "* serprog" " (for flash ROMs attached to Urja's AVR programmer)"
.sp
-.BR "* buspiratespi" " (for flash ROMs attached to a Bus Pirate)"
+.BR "* buspirate_spi" " (for flash ROMs attached to a Bus Pirate)"
.sp
Some programmers have optional or mandatory parameters which are described
in detail in the
@@ -307,10 +307,10 @@
.B portnum
is an I/O port number which must be a multiple of 8.
.TP
-.BR "ft2232spi " programmer
+.BR "ft2232_spi " programmer
An optional parameter species the controller
type and interface/port it should support. For that you have to use the
-.B "flashrom -p ft2232spi:model,port=interface"
+.B "flashrom -p ft2232_spi:model,port=interface"
syntax where
.B model
can be any of
@@ -335,12 +335,12 @@
instead. More information about serprog is available in serprog-protocol.txt in
the source distribution.
.TP
-.BR "buspiratespi " programmer
+.BR "buspirate_spi " programmer
A required dev parameter specifies the Bus Pirate device node and an optional
spispeed parameter specifies the frequency of the SPI bus. The parameter
delimiter is a comma. Syntax is
.sp
-.B "flashrom -p buspiratespi:dev=/dev/device,spispeed=frequency"
+.B "flashrom -p buspirate_spi:dev=/dev/device,spispeed=frequency"
.sp
where
.B frequency