So far, we have up to 4 different names for the same thing (ignoring capitalization)
CONFIG_FT2232SPI (makefile config option)
FT2232_SPI_SUPPORT (#define)
ft2232spi (programmer name)
ft2232_spi.c (programmer file)
Use CONFIG_* with underscores for makefile config options and #defines
and kill the useless _SUPPORT idiom.
Use lowercase names with underscores for programmer names and programmer
files.
With this, you can run "grep -i ft2232_spi" and find everything related
to the ft2232_spi driver. Same applies to all other programmers.
Corresponding to flashrom svn r1023.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
diff --git a/Makefile b/Makefile
index 7bc5509..2180374 100644
--- a/Makefile
+++ b/Makefile
@@ -51,7 +51,7 @@
ifeq ($(OS_ARCH), DOS)
CPPFLAGS += -I../libgetopt -I../libpci/include
# Bus Pirate and Serprog are not supported under DOS.
-CONFIG_BUSPIRATESPI = no
+CONFIG_BUSPIRATE_SPI = no
CONFIG_SERPROG = no
endif
@@ -102,7 +102,7 @@
CONFIG_ATAHPT ?= no
# Always enable FT2232 SPI dongles for now.
-CONFIG_FT2232SPI ?= yes
+CONFIG_FT2232_SPI ?= yes
# Always enable dummy tracing for now.
CONFIG_DUMMY ?= yes
@@ -114,7 +114,7 @@
CONFIG_NICREALTEK ?= yes
# Always enable Bus Pirate SPI for now.
-CONFIG_BUSPIRATESPI ?= yes
+CONFIG_BUSPIRATE_SPI ?= yes
# Disable Dediprog SF100 until support is complete and tested.
CONFIG_DEDIPROG ?= no
@@ -123,7 +123,7 @@
CONFIG_PRINT_WIKI ?= no
ifeq ($(CONFIG_INTERNAL), yes)
-FEATURE_CFLAGS += -D'INTERNAL_SUPPORT=1'
+FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1'
PROGRAMMER_OBJS += chipset_enable.o board_enable.o cbtable.o dmi.o internal.o
# FIXME: The PROGRAMMER_OBJS below should only be included on x86.
PROGRAMMER_OBJS += it87spi.o ichspi.o sb600spi.o wbsio_spi.o
@@ -131,7 +131,7 @@
endif
ifeq ($(CONFIG_SERPROG), yes)
-FEATURE_CFLAGS += -D'SERPROG_SUPPORT=1'
+FEATURE_CFLAGS += -D'CONFIG_SERPROG=1'
PROGRAMMER_OBJS += serprog.o
ifeq ($(OS_ARCH), SunOS)
LIBS += -lsocket
@@ -139,66 +139,66 @@
endif
ifeq ($(CONFIG_BITBANG_SPI), yes)
-FEATURE_CFLAGS += -D'BITBANG_SPI_SUPPORT=1'
+FEATURE_CFLAGS += -D'CONFIG_BITBANG_SPI=1'
PROGRAMMER_OBJS += bitbang_spi.o
endif
ifeq ($(CONFIG_NIC3COM), yes)
-FEATURE_CFLAGS += -D'NIC3COM_SUPPORT=1'
+FEATURE_CFLAGS += -D'CONFIG_NIC3COM=1'
PROGRAMMER_OBJS += nic3com.o
NEED_PCI := yes
endif
ifeq ($(CONFIG_GFXNVIDIA), yes)
-FEATURE_CFLAGS += -D'GFXNVIDIA_SUPPORT=1'
+FEATURE_CFLAGS += -D'CONFIG_GFXNVIDIA=1'
PROGRAMMER_OBJS += gfxnvidia.o
NEED_PCI := yes
endif
ifeq ($(CONFIG_SATASII), yes)
-FEATURE_CFLAGS += -D'SATASII_SUPPORT=1'
+FEATURE_CFLAGS += -D'CONFIG_SATASII=1'
PROGRAMMER_OBJS += satasii.o
NEED_PCI := yes
endif
ifeq ($(CONFIG_ATAHPT), yes)
-FEATURE_CFLAGS += -D'ATAHPT_SUPPORT=1'
+FEATURE_CFLAGS += -D'CONFIG_ATAHPT=1'
PROGRAMMER_OBJS += atahpt.o
NEED_PCI := yes
endif
-ifeq ($(CONFIG_FT2232SPI), yes)
+ifeq ($(CONFIG_FT2232_SPI), yes)
FTDILIBS := $(shell pkg-config --libs libftdi 2>/dev/null || printf "%s" "-lftdi -lusb")
# This is a totally ugly hack.
-FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'FT2232_SPI_SUPPORT=1'")
+FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_FT2232_SPI=1'")
FEATURE_LIBS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "$(FTDILIBS)")
PROGRAMMER_OBJS += ft2232_spi.o
endif
ifeq ($(CONFIG_DUMMY), yes)
-FEATURE_CFLAGS += -D'DUMMY_SUPPORT=1'
+FEATURE_CFLAGS += -D'CONFIG_DUMMY=1'
PROGRAMMER_OBJS += dummyflasher.o
endif
ifeq ($(CONFIG_DRKAISER), yes)
-FEATURE_CFLAGS += -D'DRKAISER_SUPPORT=1'
+FEATURE_CFLAGS += -D'CONFIG_DRKAISER=1'
PROGRAMMER_OBJS += drkaiser.o
NEED_PCI := yes
endif
ifeq ($(CONFIG_NICREALTEK), yes)
-FEATURE_CFLAGS += -D'NICREALTEK_SUPPORT=1'
+FEATURE_CFLAGS += -D'CONFIG_NICREALTEK=1'
PROGRAMMER_OBJS += nicrealtek.o
NEED_PCI := yes
endif
-ifeq ($(CONFIG_BUSPIRATESPI), yes)
-FEATURE_CFLAGS += -D'BUSPIRATE_SPI_SUPPORT=1'
+ifeq ($(CONFIG_BUSPIRATE_SPI), yes)
+FEATURE_CFLAGS += -D'CONFIG_BUSPIRATE_SPI=1'
PROGRAMMER_OBJS += buspirate_spi.o
endif
ifeq ($(CONFIG_DEDIPROG), yes)
-FEATURE_CFLAGS += -D'DEDIPROG_SUPPORT=1'
+FEATURE_CFLAGS += -D'CONFIG_DEDIPROG=1'
FEATURE_LIBS += -lusb
PROGRAMMER_OBJS += dediprog.o
endif
@@ -207,7 +207,7 @@
ifeq ($(CONFIG_SERPROG), yes)
LIB_OBJS += serial.o
else
-ifeq ($(CONFIG_BUSPIRATESPI), yes)
+ifeq ($(CONFIG_BUSPIRATE_SPI), yes)
LIB_OBJS += serial.o
endif
endif
@@ -233,7 +233,7 @@
endif
ifeq ($(CONFIG_PRINT_WIKI), yes)
-FEATURE_CFLAGS += -D'PRINT_WIKI_SUPPORT=1'
+FEATURE_CFLAGS += -D'CONFIG_PRINT_WIKI=1'
CLI_OBJS += print_wiki.o
endif
@@ -308,7 +308,7 @@
.features: features
-ifeq ($(CONFIG_FT2232SPI), yes)
+ifeq ($(CONFIG_FT2232_SPI), yes)
features: compiler
@echo "FEATURES := yes" > .features.tmp
@printf "Checking for FTDI support... "
diff --git a/buspirate_spi.c b/buspirate_spi.c
index 524b608..281a5f5 100644
--- a/buspirate_spi.c
+++ b/buspirate_spi.c
@@ -116,7 +116,7 @@
}
if (!dev) {
msg_perr("No serial device given. Use flashrom -p "
- "buspiratespi:dev=/dev/ttyUSB0\n");
+ "buspirate_spi:dev=/dev/ttyUSB0\n");
return 1;
}
if (speed) {
diff --git a/cli_classic.c b/cli_classic.c
index f541084..4899b3a 100644
--- a/cli_classic.c
+++ b/cli_classic.c
@@ -39,7 +39,7 @@
enum programmer p;
printf("Usage: %s [-n] [-V] [-f] [-h|-R|-L|"
-#if PRINT_WIKI_SUPPORT == 1
+#if CONFIG_PRINT_WIKI == 1
"-z|"
#endif
"-E|-r <file>|-w <file>|-v <file>]\n"
@@ -66,7 +66,7 @@
" -V | --verbose more verbose output\n"
" -c | --chip <chipname> probe only for specified "
"flash chip\n"
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
/* FIXME: --mainboard should be a programmer parameter */
" -m | --mainboard <[vendor:]part> override mainboard "
"detection\n"
@@ -79,7 +79,7 @@
" -i | --image <name> only flash image <name> "
"from flash layout\n"
" -L | --list-supported print supported devices\n"
-#if PRINT_WIKI_SUPPORT == 1
+#if CONFIG_PRINT_WIKI == 1
" -z | --list-supported-wiki print supported devices "
"in wiki syntax\n"
#endif
@@ -111,7 +111,7 @@
}
printf("\nYou can specify one of -h, -R, -L, "
-#if PRINT_WIKI_SUPPORT == 1
+#if CONFIG_PRINT_WIKI == 1
"-z, "
#endif
"-E, -r, -w, -v or no operation.\n"
@@ -137,7 +137,7 @@
int force = 0;
int read_it = 0, write_it = 0, erase_it = 0, verify_it = 0;
int dont_verify_it = 0, list_supported = 0;
-#if PRINT_WIKI_SUPPORT == 1
+#if CONFIG_PRINT_WIKI == 1
int list_supported_wiki = 0;
#endif
int operation_specified = 0;
@@ -237,7 +237,7 @@
erase_it = 1;
break;
case 'm':
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
tempstr = strdup(optarg);
lb_vendor_dev_from_string(tempstr);
#else
@@ -268,7 +268,7 @@
list_supported = 1;
break;
case 'z':
-#if PRINT_WIKI_SUPPORT == 1
+#if CONFIG_PRINT_WIKI == 1
if (++operation_specified > 1) {
fprintf(stderr, "More than one operation "
"specified. Aborting.\n");
@@ -344,7 +344,7 @@
exit(0);
}
-#if PRINT_WIKI_SUPPORT == 1
+#if CONFIG_PRINT_WIKI == 1
if (list_supported_wiki) {
print_supported_wiki();
exit(0);
@@ -356,7 +356,7 @@
cli_classic_abort_usage(argv[0]);
}
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
if ((programmer != PROGRAMMER_INTERNAL) && (lb_part || lb_vendor)) {
fprintf(stderr, "Error: --mainboard requires the internal "
"programmer. Aborting.\n");
diff --git a/flash.h b/flash.h
index 8e8939b..7e91633 100644
--- a/flash.h
+++ b/flash.h
@@ -39,46 +39,46 @@
typedef unsigned long chipaddr;
enum programmer {
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
PROGRAMMER_INTERNAL,
#endif
-#if DUMMY_SUPPORT == 1
+#if CONFIG_DUMMY == 1
PROGRAMMER_DUMMY,
#endif
-#if NIC3COM_SUPPORT == 1
+#if CONFIG_NIC3COM == 1
PROGRAMMER_NIC3COM,
#endif
-#if NICREALTEK_SUPPORT == 1
+#if CONFIG_NICREALTEK == 1
PROGRAMMER_NICREALTEK,
PROGRAMMER_NICREALTEK2,
#endif
-#if GFXNVIDIA_SUPPORT == 1
+#if CONFIG_GFXNVIDIA == 1
PROGRAMMER_GFXNVIDIA,
#endif
-#if DRKAISER_SUPPORT == 1
+#if CONFIG_DRKAISER == 1
PROGRAMMER_DRKAISER,
#endif
-#if SATASII_SUPPORT == 1
+#if CONFIG_SATASII == 1
PROGRAMMER_SATASII,
#endif
-#if ATAHPT_SUPPORT == 1
+#if CONFIG_ATAHPT == 1
PROGRAMMER_ATAHPT,
#endif
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
#if defined(__i386__) || defined(__x86_64__)
PROGRAMMER_IT87SPI,
#endif
#endif
-#if FT2232_SPI_SUPPORT == 1
- PROGRAMMER_FT2232SPI,
+#if CONFIG_FT2232_SPI == 1
+ PROGRAMMER_FT2232_SPI,
#endif
-#if SERPROG_SUPPORT == 1
+#if CONFIG_SERPROG == 1
PROGRAMMER_SERPROG,
#endif
-#if BUSPIRATE_SPI_SUPPORT == 1
- PROGRAMMER_BUSPIRATESPI,
+#if CONFIG_BUSPIRATE_SPI == 1
+ PROGRAMMER_BUSPIRATE_SPI,
#endif
-#if DEDIPROG_SUPPORT == 1
+#if CONFIG_DEDIPROG == 1
PROGRAMMER_DEDIPROG,
#endif
PROGRAMMER_INVALID /* This must always be the last entry. */
@@ -258,7 +258,7 @@
extern struct flashchip flashchips[];
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
struct penable {
uint16_t vendor_id;
uint16_t device_id;
@@ -338,7 +338,7 @@
/* print.c */
char *flashbuses_to_text(enum chipbustype bustype);
void print_supported(void);
-#if (NIC3COM_SUPPORT == 1) || (GFXNVIDIA_SUPPORT == 1) || (DRKAISER_SUPPORT == 1) || (SATASII_SUPPORT == 1) || (ATAHPT_SUPPORT == 1) || (NICREALTEK_SUPPORT == 1)
+#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT >= 1
void print_supported_pcidevs(struct pcidev_status *devs);
#endif
void print_supported_wiki(void);
@@ -390,7 +390,7 @@
#endif
void get_io_perms(void);
void release_io_perms(void);
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
extern int is_laptop;
extern int force_boardenable;
extern int force_boardmismatch;
@@ -432,7 +432,7 @@
void fallback_chip_readn(uint8_t *buf, const chipaddr addr, size_t len);
/* dummyflasher.c */
-#if DUMMY_SUPPORT == 1
+#if CONFIG_DUMMY == 1
int dummy_init(void);
int dummy_shutdown(void);
void *dummy_map(const char *descr, unsigned long phys_addr, size_t len);
@@ -450,7 +450,7 @@
#endif
/* nic3com.c */
-#if NIC3COM_SUPPORT == 1
+#if CONFIG_NIC3COM == 1
int nic3com_init(void);
int nic3com_shutdown(void);
void nic3com_chip_writeb(uint8_t val, chipaddr addr);
@@ -459,7 +459,7 @@
#endif
/* gfxnvidia.c */
-#if GFXNVIDIA_SUPPORT == 1
+#if CONFIG_GFXNVIDIA == 1
int gfxnvidia_init(void);
int gfxnvidia_shutdown(void);
void gfxnvidia_chip_writeb(uint8_t val, chipaddr addr);
@@ -468,7 +468,7 @@
#endif
/* drkaiser.c */
-#if DRKAISER_SUPPORT == 1
+#if CONFIG_DRKAISER == 1
int drkaiser_init(void);
int drkaiser_shutdown(void);
void drkaiser_chip_writeb(uint8_t val, chipaddr addr);
@@ -477,7 +477,7 @@
#endif
/* nicrealtek.c */
-#if NICREALTEK_SUPPORT == 1
+#if CONFIG_NICREALTEK == 1
int nicrealtek_init(void);
int nicsmc1211_init(void);
int nicrealtek_shutdown(void);
@@ -489,7 +489,7 @@
/* satasii.c */
-#if SATASII_SUPPORT == 1
+#if CONFIG_SATASII == 1
int satasii_init(void);
int satasii_shutdown(void);
void satasii_chip_writeb(uint8_t val, chipaddr addr);
@@ -498,7 +498,7 @@
#endif
/* atahpt.c */
-#if ATAHPT_SUPPORT == 1
+#if CONFIG_ATAHPT == 1
int atahpt_init(void);
int atahpt_shutdown(void);
void atahpt_chip_writeb(uint8_t val, chipaddr addr);
@@ -611,7 +611,7 @@
/* spi.c */
enum spi_controller {
SPI_CONTROLLER_NONE,
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
#if defined(__i386__) || defined(__x86_64__)
SPI_CONTROLLER_ICH7,
SPI_CONTROLLER_ICH9,
@@ -621,16 +621,16 @@
SPI_CONTROLLER_WBSIO,
#endif
#endif
-#if FT2232_SPI_SUPPORT == 1
+#if CONFIG_FT2232_SPI == 1
SPI_CONTROLLER_FT2232,
#endif
-#if DUMMY_SUPPORT == 1
+#if CONFIG_DUMMY == 1
SPI_CONTROLLER_DUMMY,
#endif
-#if BUSPIRATE_SPI_SUPPORT == 1
+#if CONFIG_BUSPIRATE_SPI == 1
SPI_CONTROLLER_BUSPIRATE,
#endif
-#if DEDIPROG_SUPPORT == 1
+#if CONFIG_DEDIPROG == 1
SPI_CONTROLLER_DEDIPROG,
#endif
SPI_CONTROLLER_INVALID /* This must always be the last entry. */
diff --git a/flashrom.8 b/flashrom.8
index 87dd69b..160b311 100644
--- a/flashrom.8
+++ b/flashrom.8
@@ -166,11 +166,11 @@
.sp
.BR "* it87spi" " (for flash ROMs behind an ITE IT87xx Super I/O LPC/SPI translation unit)"
.sp
-.BR "* ft2232spi" " (for flash ROMs attached to a FT2232H/FT4232H based USB SPI programmer)"
+.BR "* ft2232_spi" " (for flash ROMs attached to a FT2232H/FT4232H based USB SPI programmer)"
.sp
.BR "* serprog" " (for flash ROMs attached to Urja's AVR programmer)"
.sp
-.BR "* buspiratespi" " (for flash ROMs attached to a Bus Pirate)"
+.BR "* buspirate_spi" " (for flash ROMs attached to a Bus Pirate)"
.sp
Some programmers have optional or mandatory parameters which are described
in detail in the
@@ -307,10 +307,10 @@
.B portnum
is an I/O port number which must be a multiple of 8.
.TP
-.BR "ft2232spi " programmer
+.BR "ft2232_spi " programmer
An optional parameter species the controller
type and interface/port it should support. For that you have to use the
-.B "flashrom -p ft2232spi:model,port=interface"
+.B "flashrom -p ft2232_spi:model,port=interface"
syntax where
.B model
can be any of
@@ -335,12 +335,12 @@
instead. More information about serprog is available in serprog-protocol.txt in
the source distribution.
.TP
-.BR "buspiratespi " programmer
+.BR "buspirate_spi " programmer
A required dev parameter specifies the Bus Pirate device node and an optional
spispeed parameter specifies the frequency of the SPI bus. The parameter
delimiter is a comma. Syntax is
.sp
-.B "flashrom -p buspiratespi:dev=/dev/device,spispeed=frequency"
+.B "flashrom -p buspirate_spi:dev=/dev/device,spispeed=frequency"
.sp
where
.B frequency
diff --git a/flashrom.c b/flashrom.c
index 071c52e..8a97454 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -38,9 +38,9 @@
char *chip_to_probe = NULL;
int verbose = 0;
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
enum programmer programmer = PROGRAMMER_INTERNAL;
-#elif DUMMY_SUPPORT == 1
+#elif CONFIG_DUMMY == 1
enum programmer programmer = PROGRAMMER_DUMMY;
#else
/* If neither internal nor dummy are selected, we must pick a sensible default.
@@ -48,39 +48,39 @@
* if more than one of them is selected. If only one is selected, it is clear
* that the user wants that one to become the default.
*/
-#if NIC3COM_SUPPORT+GFXNVIDIA_SUPPORT+DRKAISER_SUPPORT+SATASII_SUPPORT+ATAHPT_SUPPORT+FT2232_SPI_SUPPORT+SERPROG_SUPPORT+BUSPIRATE_SPI_SUPPORT+DEDIPROG_SUPPORT+NICREALTEK_SUPPORT > 1
-#error Please enable either CONFIG_DUMMY or CONFIG_INTERNAL or disable support for all external programmers except one.
+#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT+CONFIG_FT2232_SPI+CONFIG_SERPROG+CONFIG_BUSPIRATE_SPI+CONFIG_DEDIPROG > 1
+#error Please enable either CONFIG_DUMMY or CONFIG_INTERNAL or disable support for all programmers except one.
#endif
enum programmer programmer =
-#if NIC3COM_SUPPORT == 1
+#if CONFIG_NIC3COM == 1
PROGRAMMER_NIC3COM
#endif
-#if NICREALTEK_SUPPORT == 1
+#if CONFIG_NICREALTEK == 1
PROGRAMMER_NICREALTEK
PROGRAMMER_NICREALTEK2
#endif
-#if GFXNVIDIA_SUPPORT == 1
+#if CONFIG_GFXNVIDIA == 1
PROGRAMMER_GFXNVIDIA
#endif
-#if DRKAISER_SUPPORT == 1
+#if CONFIG_DRKAISER == 1
PROGRAMMER_DRKAISER
#endif
-#if SATASII_SUPPORT == 1
+#if CONFIG_SATASII == 1
PROGRAMMER_SATASII
#endif
-#if ATAHPT_SUPPORT == 1
+#if CONFIG_ATAHPT == 1
PROGRAMMER_ATAHPT
#endif
-#if FT2232_SPI_SUPPORT == 1
- PROGRAMMER_FT2232SPI
+#if CONFIG_FT2232_SPI == 1
+ PROGRAMMER_FT2232_SPI
#endif
-#if SERPROG_SUPPORT == 1
+#if CONFIG_SERPROG == 1
PROGRAMMER_SERPROG
#endif
-#if BUSPIRATE_SPI_SUPPORT == 1
- PROGRAMMER_BUSPIRATESPI
+#if CONFIG_BUSPIRATE_SPI == 1
+ PROGRAMMER_BUSPIRATE_SPI
#endif
-#if DEDIPROG_SUPPORT == 1
+#if CONFIG_DEDIPROG == 1
PROGRAMMER_DEDIPROG
#endif
;
@@ -107,7 +107,7 @@
};
const struct programmer_entry programmer_table[] = {
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
{
.name = "internal",
.init = internal_init,
@@ -126,7 +126,7 @@
},
#endif
-#if DUMMY_SUPPORT == 1
+#if CONFIG_DUMMY == 1
{
.name = "dummy",
.init = dummy_init,
@@ -145,7 +145,7 @@
},
#endif
-#if NIC3COM_SUPPORT == 1
+#if CONFIG_NIC3COM == 1
{
.name = "nic3com",
.init = nic3com_init,
@@ -164,7 +164,7 @@
},
#endif
-#if NICREALTEK_SUPPORT == 1
+#if CONFIG_NICREALTEK == 1
{
.name = "nicrealtek",
.init = nicrealtek_init,
@@ -200,7 +200,7 @@
#endif
-#if GFXNVIDIA_SUPPORT == 1
+#if CONFIG_GFXNVIDIA == 1
{
.name = "gfxnvidia",
.init = gfxnvidia_init,
@@ -219,7 +219,7 @@
},
#endif
-#if DRKAISER_SUPPORT == 1
+#if CONFIG_DRKAISER == 1
{
.name = "drkaiser",
.init = drkaiser_init,
@@ -238,7 +238,7 @@
},
#endif
-#if SATASII_SUPPORT == 1
+#if CONFIG_SATASII == 1
{
.name = "satasii",
.init = satasii_init,
@@ -257,7 +257,7 @@
},
#endif
-#if ATAHPT_SUPPORT == 1
+#if CONFIG_ATAHPT == 1
{
.name = "atahpt",
.init = atahpt_init,
@@ -276,7 +276,7 @@
},
#endif
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
#if defined(__i386__) || defined(__x86_64__)
{
.name = "it87spi",
@@ -297,9 +297,9 @@
#endif
#endif
-#if FT2232_SPI_SUPPORT == 1
+#if CONFIG_FT2232_SPI == 1
{
- .name = "ft2232spi",
+ .name = "ft2232_spi",
.init = ft2232_spi_init,
.shutdown = noop_shutdown, /* Missing shutdown */
.map_flash_region = fallback_map,
@@ -316,7 +316,7 @@
},
#endif
-#if SERPROG_SUPPORT == 1
+#if CONFIG_SERPROG == 1
{
.name = "serprog",
.init = serprog_init,
@@ -335,9 +335,9 @@
},
#endif
-#if BUSPIRATE_SPI_SUPPORT == 1
+#if CONFIG_BUSPIRATE_SPI == 1
{
- .name = "buspiratespi",
+ .name = "buspirate_spi",
.init = buspirate_spi_init,
.shutdown = buspirate_spi_shutdown,
.map_flash_region = fallback_map,
@@ -354,7 +354,7 @@
},
#endif
-#if DEDIPROG_SUPPORT == 1
+#if CONFIG_DEDIPROG == 1
{
.name = "dediprog",
.init = dediprog_init,
@@ -1259,7 +1259,7 @@
msg_gerr("SPI programmer table miscompilation!\n");
ret = 1;
}
-#if BITBANG_SPI_SUPPORT == 1
+#if CONFIG_BITBANG_SPI == 1
if (bitbang_spi_master_count - 1 != BITBANG_SPI_INVALID) {
msg_gerr("Bitbanging SPI master table miscompilation!\n");
ret = 1;
@@ -1410,7 +1410,7 @@
}
numbytes = fread(buf, 1, size, image);
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
show_id(buf, size, force);
#endif
fclose(image);
diff --git a/ft2232_spi.c b/ft2232_spi.c
index 111b46d..9a3072e 100644
--- a/ft2232_spi.c
+++ b/ft2232_spi.c
@@ -18,7 +18,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#if FT2232_SPI_SUPPORT == 1
+#if CONFIG_FT2232_SPI == 1
#include <stdio.h>
#include <stdint.h>
diff --git a/internal.c b/internal.c
index bbad788..d0eb782 100644
--- a/internal.c
+++ b/internal.c
@@ -98,7 +98,7 @@
}
#endif
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
int force_boardenable = 0;
int force_boardmismatch = 0;
diff --git a/layout.c b/layout.c
index 363e4f3..d95cf12 100644
--- a/layout.c
+++ b/layout.c
@@ -24,7 +24,7 @@
#include <ctype.h>
#include "flash.h"
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
char *mainboard_vendor = NULL;
char *mainboard_part = NULL;
#endif
@@ -41,7 +41,7 @@
romlayout_t rom_entries[MAX_ROMLAYOUT];
-#if INTERNAL_SUPPORT == 1 /* FIXME: Move the whole block to cbtable.c? */
+#if CONFIG_INTERNAL == 1 /* FIXME: Move the whole block to cbtable.c? */
static char *def_name = "DEFAULT";
int show_id(uint8_t *bios, int size, int force)
diff --git a/print.c b/print.c
index a2f4e5d..65af085 100644
--- a/print.c
+++ b/print.c
@@ -145,7 +145,7 @@
}
}
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
void print_supported_chipsets(void)
{
int i, j, chipsetcount = 0;
@@ -228,37 +228,37 @@
void print_supported(void)
{
print_supported_chips();
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
print_supported_chipsets();
print_supported_boards();
#endif
-#if (NIC3COM_SUPPORT == 1) || (GFXNVIDIA_SUPPORT == 1) || (DRKAISER_SUPPORT == 1) || (SATASII_SUPPORT == 1)
+#if CONFIG_NIC3COM+CONFIG_NICREALTEK+CONFIG_GFXNVIDIA+CONFIG_DRKAISER+CONFIG_SATASII+CONFIG_ATAHPT >= 1
printf("\nSupported PCI devices flashrom can use "
"as programmer:\n\n");
#endif
-#if NIC3COM_SUPPORT == 1
+#if CONFIG_NIC3COM == 1
print_supported_pcidevs(nics_3com);
#endif
-#if NICREALTEK_SUPPORT == 1
+#if CONFIG_NICREALTEK == 1
print_supported_pcidevs(nics_realtek);
print_supported_pcidevs(nics_realteksmc1211);
#endif
-#if GFXNVIDIA_SUPPORT == 1
+#if CONFIG_GFXNVIDIA == 1
print_supported_pcidevs(gfx_nvidia);
#endif
-#if DRKAISER_SUPPORT == 1
+#if CONFIG_DRKAISER == 1
print_supported_pcidevs(drkaiser_pcidev);
#endif
-#if SATASII_SUPPORT == 1
+#if CONFIG_SATASII == 1
print_supported_pcidevs(satas_sii);
#endif
-#if ATAHPT_SUPPORT == 1
+#if CONFIG_ATAHPT == 1
print_supported_pcidevs(ata_hpt);
#endif
}
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
/* Please keep this list alphabetically ordered by vendor/board. */
const struct board_info boards_ok[] = {
/* Verified working boards that don't need write-enables. */
diff --git a/print_wiki.c b/print_wiki.c
index 3d51bfa..d2fd022 100644
--- a/print_wiki.c
+++ b/print_wiki.c
@@ -25,7 +25,7 @@
#include "flash.h"
#include "flashchips.h"
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
struct board_info_url {
const char *vendor;
const char *name;
@@ -46,7 +46,7 @@
generated by pasting '''flashrom -z''' output.<br />\
'''Last update:''' %s(generated by flashrom %s)\n</small></div>\n";
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
const char *chipset_th = "{| border=\"0\" style=\"font-size: smaller\"\n\
|- bgcolor=\"#6699dd\"\n! align=\"left\" | Vendor\n\
! align=\"left\" | Southbridge\n! align=\"left\" | PCI IDs\n\
@@ -89,7 +89,7 @@
! align=\"left\" | Device\n! align=\"left\" | PCI IDs\n\
! align=\"left\" | Status\n\n";
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
const char *laptop_intro = "\n== Supported laptops/notebooks ==\n\n\
In general, flashing laptops is more difficult because laptops\n\n\
* often use the flash chip for stuff besides the BIOS,\n\
@@ -599,29 +599,29 @@
time_t t = time(NULL);
printf(wiki_header, ctime(&t), flashrom_version);
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
print_supported_chips_wiki(2);
print_supported_chipsets_wiki(3);
print_supported_boards_wiki();
#endif
printf("%s", programmer_section);
-#if NIC3COM_SUPPORT == 1
+#if CONFIG_NIC3COM == 1
print_supported_pcidevs_wiki(nics_3com);
#endif
-#if NICREALTEK_SUPPORT == 1
+#if CONFIG_NICREALTEK == 1
print_supported_pcidevs_wiki(nics_realtek);
print_supported_pcidevs_wiki(nics_realteksmc1211);
#endif
-#if GFXNVIDIA_SUPPORT == 1
+#if CONFIG_GFXNVIDIA == 1
print_supported_pcidevs_wiki(gfx_nvidia);
#endif
-#if DRKAISER_SUPPORT == 1
+#if CONFIG_DRKAISER == 1
print_supported_pcidevs_wiki(drkaiser_pcidev);
#endif
-#if SATASII_SUPPORT == 1
+#if CONFIG_SATASII == 1
print_supported_pcidevs_wiki(satas_sii);
#endif
-#if ATAHPT_SUPPORT == 1
+#if CONFIG_ATAHPT == 1
print_supported_pcidevs_wiki(ata_hpt);
#endif
printf("\n|}\n");
diff --git a/spi.c b/spi.c
index 67682b5..30e0d33 100644
--- a/spi.c
+++ b/spi.c
@@ -40,7 +40,7 @@
.write_256 = NULL,
},
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
#if defined(__i386__) || defined(__x86_64__)
{ /* SPI_CONTROLLER_ICH7 */
.command = ich_spi_send_command,
@@ -86,7 +86,7 @@
#endif
#endif
-#if FT2232_SPI_SUPPORT == 1
+#if CONFIG_FT2232_SPI == 1
{ /* SPI_CONTROLLER_FT2232 */
.command = ft2232_spi_send_command,
.multicommand = default_spi_send_multicommand,
@@ -95,7 +95,7 @@
},
#endif
-#if DUMMY_SUPPORT == 1
+#if CONFIG_DUMMY == 1
{ /* SPI_CONTROLLER_DUMMY */
.command = dummy_spi_send_command,
.multicommand = default_spi_send_multicommand,
@@ -104,7 +104,7 @@
},
#endif
-#if BUSPIRATE_SPI_SUPPORT == 1
+#if CONFIG_BUSPIRATE_SPI == 1
{ /* SPI_CONTROLLER_BUSPIRATE */
.command = buspirate_spi_send_command,
.multicommand = default_spi_send_multicommand,
@@ -113,7 +113,7 @@
},
#endif
-#if DEDIPROG_SUPPORT == 1
+#if CONFIG_DEDIPROG == 1
{ /* SPI_CONTROLLER_DEDIPROG */
.command = dediprog_spi_send_command,
.multicommand = default_spi_send_multicommand,
@@ -214,7 +214,7 @@
uint32_t spi_get_valid_read_addr(void)
{
switch (spi_controller) {
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
#if defined(__i386__) || defined(__x86_64__)
case SPI_CONTROLLER_ICH7:
/* Return BBAR for ICH chipsets. */
diff --git a/spi25.c b/spi25.c
index 72940c1..c6b5119 100644
--- a/spi25.c
+++ b/spi25.c
@@ -171,7 +171,7 @@
{
/* only some SPI chipsets support 4 bytes commands */
switch (spi_controller) {
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
#if defined(__i386__) || defined(__x86_64__)
case SPI_CONTROLLER_ICH7:
case SPI_CONTROLLER_ICH9:
@@ -180,16 +180,16 @@
case SPI_CONTROLLER_WBSIO:
#endif
#endif
-#if FT2232_SPI_SUPPORT == 1
+#if CONFIG_FT2232_SPI == 1
case SPI_CONTROLLER_FT2232:
#endif
-#if DUMMY_SUPPORT == 1
+#if CONFIG_DUMMY == 1
case SPI_CONTROLLER_DUMMY:
#endif
-#if BUSPIRATE_SPI_SUPPORT == 1
+#if CONFIG_BUSPIRATE_SPI == 1
case SPI_CONTROLLER_BUSPIRATE:
#endif
-#if DEDIPROG_SUPPORT == 1
+#if CONFIG_DEDIPROG == 1
case SPI_CONTROLLER_DEDIPROG:
#endif
return probe_spi_rdid_generic(flash, 4);
@@ -1023,7 +1023,7 @@
int result;
switch (spi_controller) {
-#if INTERNAL_SUPPORT == 1
+#if CONFIG_INTERNAL == 1
#if defined(__i386__) || defined(__x86_64__)
case SPI_CONTROLLER_WBSIO:
msg_cerr("%s: impossible with Winbond SPI masters,"