Add external flasher support
- Read/write accesses through function pointers
- Command line parameter for internal/external flasher
- Board and chipset setup moved to internal init function
- Shutdown stuff moved to internal shutdown function
As a side benefit, this will allow us to undo chipset write enable
during shutdown.
Tested by Uwe on real hardware.
Corresponding to flashrom svn r476.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
diff --git a/flashrom.c b/flashrom.c
index d60ffe5..7222d7f 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -21,7 +21,6 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <errno.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/stat.h>
@@ -30,51 +29,27 @@
#include <string.h>
#include <stdlib.h>
#include <getopt.h>
-#include <pci/pci.h>
#include "flash.h"
char *chip_to_probe = NULL;
-struct pci_access *pacc; /* For board and chipset_enable */
int exclude_start_page, exclude_end_page;
int verbose = 0;
+int programmer = PROGRAMMER_INTERNAL;
-struct pci_dev *pci_dev_find(uint16_t vendor, uint16_t device)
-{
- struct pci_dev *temp;
- struct pci_filter filter;
+const struct programmer_entry programmer_table[] = {
+ {
+ .init = internal_init,
+ .shutdown = internal_shutdown,
+ .chip_readb = internal_chip_readb,
+ .chip_readw = internal_chip_readw,
+ .chip_readl = internal_chip_readl,
+ .chip_writeb = internal_chip_writeb,
+ .chip_writew = internal_chip_writew,
+ .chip_writel = internal_chip_writel,
+ },
- pci_filter_init(NULL, &filter);
- filter.vendor = vendor;
- filter.device = device;
-
- for (temp = pacc->devices; temp; temp = temp->next)
- if (pci_filter_match(&filter, temp))
- return temp;
-
- return NULL;
-}
-
-struct pci_dev *pci_card_find(uint16_t vendor, uint16_t device,
- uint16_t card_vendor, uint16_t card_device)
-{
- struct pci_dev *temp;
- struct pci_filter filter;
-
- pci_filter_init(NULL, &filter);
- filter.vendor = vendor;
- filter.device = device;
-
- for (temp = pacc->devices; temp; temp = temp->next)
- if (pci_filter_match(&filter, temp)) {
- if ((card_vendor ==
- pci_read_word(temp, PCI_SUBSYSTEM_VENDOR_ID))
- && (card_device ==
- pci_read_word(temp, PCI_SUBSYSTEM_ID)))
- return temp;
- }
-
- return NULL;
-}
+ {},
+};
void map_flash_registers(struct flashchip *flash)
{
@@ -362,9 +337,6 @@
int force = 0;
int read_it = 0, write_it = 0, erase_it = 0, verify_it = 0;
int ret = 0, i;
-#if defined(__FreeBSD__) || defined(__DragonFly__)
- int io_fd;
-#endif
static struct option long_options[] = {
{"read", 0, 0, 'r'},
@@ -380,6 +352,7 @@
{"layout", 1, 0, 'l'},
{"image", 1, 0, 'i'},
{"list-supported", 0, 0, 'L'},
+ {"programmer", 1, 0, 'p'},
{"help", 0, 0, 'h'},
{"version", 0, 0, 'R'},
{0, 0, 0, 0}
@@ -401,7 +374,7 @@
}
setbuf(stdout, NULL);
- while ((opt = getopt_long(argc, argv, "rRwvVEfc:s:e:m:l:i:Lh",
+ while ((opt = getopt_long(argc, argv, "rRwvVEfc:s:e:m:l:i:p:Lh",
long_options, &option_index)) != EOF) {
switch (opt) {
case 'r':
@@ -460,6 +433,14 @@
print_supported_boards();
exit(0);
break;
+ case 'p':
+ if (strncmp(optarg, "internal", 8) == 0) {
+ programmer = PROGRAMMER_INTERNAL;
+ } else {
+ printf("Error: Unknown programmer.\n");
+ exit(1);
+ }
+ break;
case 'R':
/* print_version() is always called during startup. */
exit(0);
@@ -479,42 +460,10 @@
if (optind < argc)
filename = argv[optind++];
- /* First get full io access */
-#if defined (__sun) && (defined(__i386) || defined(__amd64))
- if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) != 0) {
-#elif defined(__FreeBSD__) || defined (__DragonFly__)
- if ((io_fd = open("/dev/io", O_RDWR)) < 0) {
-#else
- if (iopl(3) != 0) {
-#endif
- fprintf(stderr, "ERROR: Could not get IO privileges (%s).\nYou need to be root.\n", strerror(errno));
- exit(1);
- }
-
- /* Initialize PCI access for flash enables */
- pacc = pci_alloc(); /* Get the pci_access structure */
- /* Set all options you want -- here we stick with the defaults */
- pci_init(pacc); /* Initialize the PCI library */
- pci_scan_bus(pacc); /* We want to get the list of devices */
+ ret = programmer_init();
myusec_calibrate_delay();
- /* We look at the lbtable first to see if we need a
- * mainboard specific flash enable sequence.
- */
- coreboot_init();
-
- /* try to enable it. Failure IS an option, since not all motherboards
- * really need this to be done, etc., etc.
- */
- ret = chipset_flash_enable();
- if (ret == -2) {
- printf("WARNING: No chipset found. Flash detection "
- "will most likely fail.\n");
- }
-
- board_flash_enable(lb_vendor, lb_part);
-
for (i = 0; i < ARRAY_SIZE(flashes); i++) {
flashes[i] =
probe_flash(i ? flashes[i - 1] + 1 : flashchips, 0);
@@ -704,8 +653,7 @@
if (verify_it)
ret |= verify_flash(flash, buf);
-#ifdef __FreeBSD__
- close(io_fd);
-#endif
+ programmer_shutdown();
+
return ret;
}