Add support for remaining Numonyx (Micron) N25Q chips
Add...
- N25Q128..3E
- N25Q128..1E
- N25Q256..1E (defunct due to addressing)
- N25Q256..3E (defunct due to addressing)
- N25Q512..1E (defunct due to addressing)
- N25Q512..3E (defunct due to addressing)
- N25Q00A..3G (defunct due to addressing)
Also, refine existing family members.
Corresponding to flashrom svn r1693.
Signed-off-by: Nikolay Nikolaev <evrinoma@gmail.com>
Reviewed-by: Steven Zakulec <spzakulec@gmail.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/chipdrivers.h b/chipdrivers.h
index 03abdd9..091d14c 100644
--- a/chipdrivers.h
+++ b/chipdrivers.h
@@ -48,6 +48,7 @@
int spi_block_erase_60(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
int spi_block_erase_62(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
int spi_block_erase_81(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+int spi_block_erase_c4(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
int spi_block_erase_c7(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
int spi_block_erase_d7(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
int spi_block_erase_d8(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
@@ -91,6 +92,8 @@
int spi_disable_blockprotect_at25fs010(struct flashctx *flash);
int spi_disable_blockprotect_at25fs040(struct flashctx *flash);
int spi_prettyprint_status_register_en25s_wp(struct flashctx *flash);
+int spi_prettyprint_status_register_n25q(struct flashctx *flash);
+int spi_disable_blockprotect_n25q(struct flashctx *flash);
int spi_prettyprint_status_register_bp2_ep_srwd(struct flashctx *flash);
int spi_disable_blockprotect_bp2_ep_srwd(struct flashctx *flash);
int spi_prettyprint_status_register_sst25(struct flashctx *flash);
diff --git a/flashchips.c b/flashchips.c
index f50d130..a3d4345 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -7308,8 +7308,9 @@
.block_erase = spi_block_erase_c7,
}
},
- .unlock = spi_disable_blockprotect,
- .write = spi_chip_write_256,
+ .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
+ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
+ .write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1700, 2000},
},
@@ -7341,8 +7342,9 @@
.block_erase = spi_block_erase_c7,
}
},
- .unlock = spi_disable_blockprotect,
- .write = spi_chip_write_256,
+ .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
+ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
+ .write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1700, 2000},
},
@@ -7374,8 +7376,9 @@
.block_erase = spi_block_erase_c7,
}
},
- .unlock = spi_disable_blockprotect,
- .write = spi_chip_write_256,
+ .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
+ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
+ .write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
@@ -7407,8 +7410,9 @@
.block_erase = spi_block_erase_c7,
}
},
- .unlock = spi_disable_blockprotect,
- .write = spi_chip_write_256,
+ .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
+ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
+ .write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1700, 2000},
},
@@ -7440,9 +7444,246 @@
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
- .unlock = spi_disable_blockprotect,
- .write = spi_chip_write_256,
+ .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
+ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
+ .write = spi_chip_write_256, /* Multi I/O supported */
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Numonyx",
+ .name = "N25Q128..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = ST_N25Q128__1E,
+ .total_size = 16384,
+ .page_size = 256,
+ /* supports SFDP */
+ /* OTP: 64B total; read 0x4B, write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {4 * 1024, 4096 } },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 256} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {16384 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
+ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
+ .write = spi_chip_write_256, /* Multi I/O supported */
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {1700, 2000},
+ },
+
+ {
+ .vendor = "Numonyx",
+ .name = "N25Q128..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = ST_N25Q128__3E,
+ .total_size = 16384,
+ .page_size = 256,
+ /* supports SFDP */
+ /* OTP: 64B total; read 0x4B, write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {4 * 1024, 4096 } },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 256} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {16384 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
+ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
+ .write = spi_chip_write_256, /* Multi I/O supported */
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Numonyx",
+ .name = "N25Q256..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = ST_N25Q256__1E,
+ .total_size = 32768,
+ .page_size = 256,
+ /* supports SFDP */
+ /* OTP: 64B total; read 0x4B, write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_BAD_REW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {4 * 1024, 8192 } },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 512} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {32768 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
+ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
+ .write = spi_chip_write_256, /* Multi I/O supported */
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {1700, 2000},
+ },
+
+ {
+ .vendor = "Numonyx",
+ .name = "N25Q256..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = ST_N25Q256__3E,
+ .total_size = 32768,
+ .page_size = 256,
+ /* supports SFDP */
+ /* OTP: 64B total; read 0x4B, write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_BAD_REW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {4 * 1024, 8192 } },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 512} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {32768 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
+ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
+ .write = spi_chip_write_256, /* Multi I/O supported */
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Numonyx",
+ .name = "N25Q512..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = ST_N25Q512__1E,
+ .total_size = 65536,
+ .page_size = 256,
+ /* supports SFDP */
+ /* OTP: 64B total; read 0x4B, write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_BAD_REW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {4 * 1024, 16384 } },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 1024 } },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {32 * 1024 * 1024, 2 } },
+ .block_erase = spi_block_erase_c4,
+ }, { /* Some models have a bulk erase command too. */
+ .eraseblocks = { {64 * 1024 * 1024, 1 } },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
+ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
+ .write = spi_chip_write_256, /* Multi I/O supported */
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {1700, 2000},
+ },
+
+ {
+ .vendor = "Numonyx",
+ .name = "N25Q512..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = ST_N25Q512__3E,
+ .total_size = 65536,
+ .page_size = 256,
+ /* supports SFDP */
+ /* OTP: 64B total; read 0x4B, write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_BAD_REW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {4 * 1024, 16384 } },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 1024 } },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {32 * 1024 * 1024, 2 } },
+ .block_erase = spi_block_erase_c4,
+ }, { /* Some models have a bulk erase command too. */
+ .eraseblocks = { {64 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
+ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
+ .write = spi_chip_write_256, /* Multi I/O supported */
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Numonyx",
+ .name = "N25Q00A..3G", /* ..3G = 3V, uniform 64KB/4KB blocks/sectors */
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = ST_N25Q00A__3E,
+ .total_size = 131072,
+ .page_size = 256,
+ /* supports SFDP */
+ /* OTP: 64B total; read 0x4B, write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_BAD_REW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {4 * 1024, 32768 } },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 2048 } },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {32 * 1024 * 1024, 4 } },
+ .block_erase = spi_block_erase_c4,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
+ .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
+ .write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
diff --git a/flashchips.h b/flashchips.h
index cbeb201..bf22986 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -663,11 +663,18 @@
#define ST_M29W010B 0x23
#define ST_M29W040B 0xE3
#define ST_M29W512B 0x27
-#define ST_N25Q016__1E 0xBB15 /* N25Q016, 1.8V, (uniform sectors expected) */
-#define ST_N25Q032__3E 0xBA16 /* N25Q032, 3.0V, (uniform sectors expected) */
-#define ST_N25Q032__1E 0xBB16 /* N25Q032, 1.8V, (uniform sectors expected) */
-#define ST_N25Q064__3E 0xBA17 /* N25Q064, 3.0V, (uniform sectors expected) */
-#define ST_N25Q064__1E 0xBB17 /* N25Q064, 1.8V, (uniform sectors expected) */
+#define ST_N25Q016__1E 0xBB15 /* N25Q016, 1.8V, (uniform sectors expected) */
+#define ST_N25Q032__3E 0xBA16 /* N25Q032, 3.0V, (uniform sectors expected) */
+#define ST_N25Q032__1E 0xBB16 /* N25Q032, 1.8V, (uniform sectors expected) */
+#define ST_N25Q064__3E 0xBA17 /* N25Q064, 3.0V, (uniform sectors expected) */
+#define ST_N25Q064__1E 0xBB17 /* N25Q064, 1.8V, (uniform sectors expected) */
+#define ST_N25Q128__3E 0xBA18 /* N25Q128, 3.0V, (uniform sectors expected) */
+#define ST_N25Q128__1E 0xBB18 /* N25Q128, 1.8V, (uniform sectors expected) */
+#define ST_N25Q256__3E 0xBA19 /* N25Q256, 3.0V, (uniform sectors expected) */
+#define ST_N25Q256__1E 0xBB19 /* N25Q256, 1.8V, (uniform sectors expected) */
+#define ST_N25Q512__3E 0xBA20 /* N25Q512, 3.0V, (uniform sectors expected) */
+#define ST_N25Q512__1E 0xBB20 /* N25Q512, 1.8V, (uniform sectors expected) */
+#define ST_N25Q00A__3E 0xBA21 /* N25Q00A, 3.0V, (uniform sectors expected) */
#define SYNCMOS_MVC_ID 0x40 /* SyncMOS (SM) and Mosel Vitelic Corporation (MVC) */
#define MVC_V29C51000T 0x00
diff --git a/spi.h b/spi.h
index 9e38e74..de5b3be 100644
--- a/spi.h
+++ b/spi.h
@@ -91,6 +91,11 @@
#define JEDEC_BE_81_OUTSIZE 0x04
#define JEDEC_BE_81_INSIZE 0x00
+/* Block Erase 0xc4 is supported by Micron chips. */
+#define JEDEC_BE_C4 0xc4
+#define JEDEC_BE_C4_OUTSIZE 0x04
+#define JEDEC_BE_C4_INSIZE 0x00
+
/* Block Erase 0xd8 is supported by EON/Macronix chips. */
#define JEDEC_BE_D8 0xd8
#define JEDEC_BE_D8_OUTSIZE 0x04
diff --git a/spi25.c b/spi25.c
index 26da13d..e001196 100644
--- a/spi25.c
+++ b/spi25.c
@@ -474,6 +474,49 @@
}
/* Block size is usually
+ * 32M (one die) for Micron
+ */
+int spi_block_erase_c4(struct flashctx *flash, unsigned int addr, unsigned int blocklen)
+{
+ int result;
+ struct spi_command cmds[] = {
+ {
+ .writecnt = JEDEC_WREN_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_WREN },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = JEDEC_BE_C4_OUTSIZE,
+ .writearr = (const unsigned char[]){
+ JEDEC_BE_C4,
+ (addr >> 16) & 0xff,
+ (addr >> 8) & 0xff,
+ (addr & 0xff)
+ },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = 0,
+ .writearr = NULL,
+ .readcnt = 0,
+ .readarr = NULL,
+ }};
+
+ result = spi_send_multicommand(flash, cmds);
+ if (result) {
+ msg_cerr("%s failed during command execution at address 0x%x\n", __func__, addr);
+ return result;
+ }
+ /* Wait until the Write-In-Progress bit is cleared.
+ * This usually takes 240-480 s, so wait in 500 ms steps.
+ */
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
+ programmer_delay(500 * 1000 * 1000);
+ /* FIXME: Check the status register for errors. */
+ return 0;
+}
+
+/* Block size is usually
* 64k for Macronix
* 32k for SST
* 4-32k non-uniform for EON
@@ -780,6 +823,8 @@
return &spi_block_erase_62;
case 0x81:
return &spi_block_erase_81;
+ case 0xc4:
+ return &spi_block_erase_c4;
case 0xc7:
return &spi_block_erase_c7;
case 0xd7:
diff --git a/spi25_statusreg.c b/spi25_statusreg.c
index 09fa057..107bacd 100644
--- a/spi25_statusreg.c
+++ b/spi25_statusreg.c
@@ -607,6 +607,28 @@
/* === Intel/Numonyx/Micron - Spansion === */
+int spi_disable_blockprotect_n25q(struct flashctx *flash)
+{
+ return spi_disable_blockprotect_generic(flash, 0x5C, 1 << 7, 0, 0xFF);
+}
+
+int spi_prettyprint_status_register_n25q(struct flashctx *flash)
+{
+ uint8_t status = spi_read_status_register(flash);
+ spi_prettyprint_status_register_hex(status);
+
+ spi_prettyprint_status_register_srwd(status);
+ if (flash->chip->total_size <= 32 / 8 * 1024) /* N25Q16 and N25Q32: reserved */
+ spi_prettyprint_status_register_bit(status, 6);
+ else
+ msg_cdbg("Chip status register: Block Protect 3 (BP3) is %sset\n",
+ (status & (1 << 6)) ? "" : "not ");
+ msg_cdbg("Chip status register: Top/Bottom (TB) is %s\n", (status & (1 << 5)) ? "bottom" : "top");
+ spi_prettyprint_status_register_bp(status, 2);
+ spi_prettyprint_status_register_welwip(status);
+ return 0;
+}
+
/* Used by Intel/Numonyx S33 and Spansion S25FL-S chips */
/* TODO: Clear P_FAIL and E_FAIL with Clear SR Fail Flags Command (30h) here? */
int spi_disable_blockprotect_bp2_ep_srwd(struct flashctx *flash)