Improve SPI status register pretty printing
- Move all functions related to SPI status registers to a new file
spi25_statusreg.c. This includes the generic as well as the
SST-specific functions from spi25.c and the chip-specific functions
from a25.c and at25.c.
- introduce helper functions
* spi_prettyprint_status_register_hex()
* spi_prettyprint_status_register_bpl()
* spi_prettyprint_status_register_plain()
Use the latter on every compatible flash chip that has no better printlock
function set and get rid of the implicit pretty printing in the SPI probing
functions.
- remove
* spi_prettyprint_status_register_common()
* spi_prettyprint_status_register_amic_a25lq032() because it can be fully
substituted with spi_prettyprint_status_register_amic_a25l032().
* spi_prettyprint_status_register() (old switch, no longer needed)
- promote and export
* spi_prettyprint_status_register_amic_a25l05p() as spi_prettyprint_status_register_default_bp1().
* spi_prettyprint_status_register_amic_a25l40p() as spi_prettyprint_status_register_default_bp2().
* spi_prettyprint_status_register_st_m25p() as spi_prettyprint_status_register_default_bp3().
- add #define TEST_BAD_REW and use it for a number of Atmel chips which
had only TEST_BAD_READ set even though they dont have erasers or a write
function set.
Corresponding to flashrom svn r1634.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flash.h b/flash.h
index 526087c..76c6942 100644
--- a/flash.h
+++ b/flash.h
@@ -188,6 +188,7 @@
#define TEST_BAD_READ (1 << 5)
#define TEST_BAD_ERASE (1 << 6)
#define TEST_BAD_WRITE (1 << 7)
+#define TEST_BAD_REW (TEST_BAD_READ | TEST_BAD_ERASE | TEST_BAD_WRITE)
#define TEST_BAD_PREW (TEST_BAD_PROBE | TEST_BAD_READ | TEST_BAD_ERASE | TEST_BAD_WRITE)
#define TEST_BAD_MASK 0xf0