Add support for Fujitsu MBM29LV160BE/TE
Corresponding to flashrom svn r1722.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flashchips.c b/flashchips.c
index a693290..9b331c7 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -4580,6 +4580,70 @@
},
{
+ .vendor = "Fujitsu",
+ .name = "MBM29LV160BE",
+ .bustype = BUS_PARALLEL,
+ .manufacture_id = FUJITSU_ID,
+ .model_id = FUJITSU_MBM29LV160BE,
+ .total_size = 2 * 1024,
+ .page_size = 0,
+ .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET,
+ .tested = TEST_UNTESTED,
+ .probe = probe_m29f400bt,
+ .probe_timing = TIMING_IGNORED,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = {
+ {16 * 1024, 1},
+ {8 * 1024, 2},
+ {32 * 1024, 1},
+ {64 * 1024, 31},
+ },
+ .block_erase = block_erase_m29f400bt,
+ }, {
+ .eraseblocks = { {2048 * 1024, 1} },
+ .block_erase = block_erase_chip_m29f400bt,
+ },
+ },
+ .write = write_m29f400bt, /* Supports a fast mode too */
+ .read = read_memmapped,
+ .voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */
+ },
+
+ {
+ .vendor = "Fujitsu",
+ .name = "MBM29LV160TE",
+ .bustype = BUS_PARALLEL,
+ .manufacture_id = FUJITSU_ID,
+ .model_id = FUJITSU_MBM29LV160TE,
+ .total_size = 2 * 1024,
+ .page_size = 0,
+ .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET,
+ .tested = TEST_UNTESTED,
+ .probe = probe_m29f400bt,
+ .probe_timing = TIMING_IGNORED,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = {
+ {64 * 1024, 31},
+ {32 * 1024, 1},
+ {8 * 1024, 2},
+ {16 * 1024, 1},
+ },
+ .block_erase = block_erase_m29f400bt,
+ }, {
+ .eraseblocks = { {2048 * 1024, 1} },
+ .block_erase = block_erase_chip_m29f400bt,
+ },
+ },
+ .write = write_m29f400bt, /* Supports a fast mode too */
+ .read = read_memmapped,
+ .voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */
+ },
+
+ {
.vendor = "GigaDevice",
.name = "GD25LQ32",
.bustype = BUS_SPI,