flashchips: Add GigaDevice GD25B512MF..GD55B02GF 3.3V parts
These F versions seem more regular. Except for a SEC bit, complete
block-protection support, and a complete 4BA/QPI command set. How-
ever, they also have non-volatile dummy-cycle bits that affect DIO
and QIO commands in SPI mode.
Datasheets used:
https://www.gigadevice.com.cn/Public/Uploads/uploadfile/files/20240412/DS-00975-GD25B512MF-Rev1.1.pdf
https://www.gigadevice.com.cn/Public/Uploads/uploadfile/files/20241211/DS-01005-GD25R512MF-Rev1.0.pdf
https://www.gigadevice.com.cn/Public/Uploads/uploadfile/files/20240412/DS-00979-GD55B01GF-Rev1.1.pdf
https://www.gigadevice.com.cn/Public/Uploads/uploadfile/files/20240729/DS-00980-GD55B02GF-Rev1.2.pdf
Change-Id: Ia31d3969d5db5ae39dad2d6463456dc7d381ed73
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.sourcearcade.org/c/flashprog/+/300
diff --git a/flashchips.c b/flashchips.c
index 9fb3914..487c708 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -8785,6 +8785,73 @@
{
.vendor = "GigaDevice",
+ .name = "GD25B512MF/GD25R512MF",
+ .bustype = BUS_SPI,
+ .manufacture_id = GIGADEVICE_ID,
+ .model_id = GIGADEVICE_GD25B512MF,
+ .total_size = 65536,
+ .page_size = 256,
+ /* Has non-volatile DC bits which affect DIO and QIO in SPI mode. */
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 | FEATURE_WRSR2 | FEATURE_WRSR3 |
+ FEATURE_OTP | FEATURE_4BA | FEATURE_FAST_READ_QPI4B |
+ (FEATURE_QPI_SRP & ~(FEATURE_FAST_READ_DIO | FEATURE_FAST_READ_QIO)),
+ .dummy_cycles = { .qpi_read_params = { 4, 6, 8, 8 } },
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 16384} },
+ .block_erase = spi_block_erase_21,
+ }, {
+ .eraseblocks = { {4 * 1024, 16384} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 2048} },
+ .block_erase = spi_block_erase_5c,
+ }, {
+ .eraseblocks = { {32 * 1024, 2048} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 1024} },
+ .block_erase = spi_block_erase_dc,
+ }, {
+ .eraseblocks = { {64 * 1024, 1024} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {65536 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {65536 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RO}, /* Fixed QE=1 */
+ .dc = {{STATUS3, 0, RW}, {STATUS3, 1, RW}},
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 6, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}, {STATUS1, 5, RW}},
+ .tb = {STATUS1, 6, RW},
+ .cmp = {STATUS3, 3, RW},
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "GigaDevice",
.name = "GD55B01GE",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
@@ -8842,6 +8909,73 @@
{
.vendor = "GigaDevice",
+ .name = "GD55B01GF",
+ .bustype = BUS_SPI,
+ .manufacture_id = GIGADEVICE_ID,
+ .model_id = GIGADEVICE_GD55B01GF,
+ .total_size = 128 * 1024,
+ .page_size = 256,
+ /* Has non-volatile DC bits which affect DIO and QIO in SPI mode. */
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 | FEATURE_WRSR2 | FEATURE_WRSR3 |
+ FEATURE_OTP | FEATURE_4BA | FEATURE_FAST_READ_QPI4B |
+ (FEATURE_QPI_SRP & ~(FEATURE_FAST_READ_DIO | FEATURE_FAST_READ_QIO)),
+ .dummy_cycles = { .qpi_read_params = { 4, 6, 8, 8 } },
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 32768} },
+ .block_erase = spi_block_erase_21,
+ }, {
+ .eraseblocks = { {4 * 1024, 32768} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 4096} },
+ .block_erase = spi_block_erase_5c,
+ }, {
+ .eraseblocks = { {32 * 1024, 4096} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 2048} },
+ .block_erase = spi_block_erase_dc,
+ }, {
+ .eraseblocks = { {64 * 1024, 2048} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {128 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {128 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RO}, /* Fixed QE=1 */
+ .dc = {{STATUS3, 0, RW}, {STATUS3, 1, RW}},
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 6, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}, {STATUS1, 5, RW}},
+ .tb = {STATUS1, 6, RW},
+ .cmp = {STATUS3, 3, RW},
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "GigaDevice",
.name = "GD55B02GE",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
@@ -8899,6 +9033,73 @@
{
.vendor = "GigaDevice",
+ .name = "GD55B02GF",
+ .bustype = BUS_SPI,
+ .manufacture_id = GIGADEVICE_ID,
+ .model_id = GIGADEVICE_GD55B02GF,
+ .total_size = 256 * 1024,
+ .page_size = 256,
+ /* Has non-volatile DC bits which affect DIO and QIO in SPI mode. */
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR_EXT2 | FEATURE_WRSR2 | FEATURE_WRSR3 |
+ FEATURE_OTP | FEATURE_4BA | FEATURE_FAST_READ_QPI4B |
+ (FEATURE_QPI_SRP & ~(FEATURE_FAST_READ_DIO | FEATURE_FAST_READ_QIO)),
+ .dummy_cycles = { .qpi_read_params = { 4, 6, 8, 8 } },
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 65536} },
+ .block_erase = spi_block_erase_21,
+ }, {
+ .eraseblocks = { {4 * 1024, 65536} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 8192} },
+ .block_erase = spi_block_erase_5c,
+ }, {
+ .eraseblocks = { {32 * 1024, 8192} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 4096} },
+ .block_erase = spi_block_erase_dc,
+ }, {
+ .eraseblocks = { {64 * 1024, 4096} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {256 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {256 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RO}, /* Fixed QE=1 */
+ .dc = {{STATUS3, 0, RW}, {STATUS3, 1, RW}},
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 6, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}, {STATUS1, 5, RW}},
+ .tb = {STATUS1, 6, RW},
+ .cmp = {STATUS3, 3, RW},
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "GigaDevice",
.name = "GD25T80",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
diff --git a/include/flashchips.h b/include/flashchips.h
index 84296bf..107a30d 100644
--- a/include/flashchips.h
+++ b/include/flashchips.h
@@ -401,6 +401,9 @@
#define GIGADEVICE_GD25Q64 0x4017 /* Same as GD25Q64B */
#define GIGADEVICE_GD25Q128 0x4018 /* GD25Q128B and GD25Q128C only, can be distinguished by SFDP */
#define GIGADEVICE_GD25Q256D 0x4019
+#define GIGADEVICE_GD25B512MF 0x401a /* Same as GD25R512MF */
+#define GIGADEVICE_GD55B01GF 0x401b
+#define GIGADEVICE_GD55B02GF 0x401c
#define GIGADEVICE_GD25VQ21B 0x4212
#define GIGADEVICE_GD25VQ41B 0x4213 /* Same as GD25VQ40C, can be distinguished by SFDP */
#define GIGADEVICE_GD25VQ80C 0x4214