ft2232_spi: Add support for Google Servo boards (v1 + v2)
This patch has been cherry-picked from various patches in the chromiumos
tree denoted below.
Change-Id: I4b679e23ab37a4357b1e3d23f6f65a1c31f7d71a
Change-Id: Ibda56201ab4519315431c08206c61ceffb7c7e65
Change-Id: I540ad2d304dc69a7c79ca154beb744ef947ff808
Servo V2 has two FT4232H parts. The first one (denoted 'legacy') is
dedicated to supporting orginal Servo V1 functionality. The second,
residing at USB ID 0x18d1:5003 provides two other SPI interfaces on
port A and B respectively.
Additional changes by Alexandru Gagniuc, Hatim Kanchwala and Urja Rannikko:
- The clock divisor is set to '6', as this creates a 10MHz SPI clock,
which is the same SPI clock that the chromiumos branch produced.
- Add udev rule for Google servo boards to util/flashrom.rules.
- Add Google servo entry to manpage.
Corresponding to flashrom svn r1925.
Signed-off-by: Todd Broch <tbroch@chromium.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Hatim Kanchwala <hatim@hatimak.me>
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Hatim Kanchwala <hatim@hatimak.me>
Acked-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl
index 745b835..fdc612e 100644
--- a/flashrom.8.tmpl
+++ b/flashrom.8.tmpl
@@ -242,7 +242,7 @@
FTDI FT2232H Mini-Module, FTDI FT4232H Mini-Module, openbiosprog-spi, Amontec \
JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster, \
Olimex ARM-USB-TINY/-H, Olimex ARM-USB-OCD/-H, TIAO/DIYGADGET USB
-Multi-Protocol Adapter (TUMPA), TUMPA Lite, and GOEPEL PicoTAP.
+Multi-Protocol Adapter (TUMPA), TUMPA Lite, GOEPEL PicoTAP and Google Servo v1/v2.
.sp
.BR "* serprog" " (for flash ROMs attached to a programmer speaking serprog, \
including Arduino-based devices as well as various programmers by Urja Rannikko, \
@@ -701,7 +701,8 @@
can be
.BR 2232H ", " 4232H ", " 232H ", " jtagkey ", " busblaster ", " openmoko ", " \
arm-usb-tiny ", " arm-usb-tiny-h ", " arm-usb-ocd ", " arm-usb-ocd-h \
-", " tumpa ", " tumpalite ", or " picotap
+", " tumpa ", " tumpalite ", " picotap ", " google-servo ", " google-servo-v2 \
+" or " google-servo-v2-legacy
and
.B interface
can be
diff --git a/ft2232_spi.c b/ft2232_spi.c
index 08742ec..be60837 100644
--- a/ft2232_spi.c
+++ b/ft2232_spi.c
@@ -58,6 +58,11 @@
#define OLIMEX_ARM_OCD_H_PID 0x002B
#define OLIMEX_ARM_TINY_H_PID 0x002A
+#define GOOGLE_VID 0x18D1
+#define GOOGLE_SERVO_PID 0x5001
+#define GOOGLE_SERVO_V2_PID0 0x5002
+#define GOOGLE_SERVO_V2_PID1 0x5003
+
const struct dev_entry devs_ft2232spi[] = {
{FTDI_VID, FTDI_FT2232H_PID, OK, "FTDI", "FT2232H"},
{FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"},
@@ -66,6 +71,9 @@
{FTDI_VID, TIAO_TUMPA_LITE_PID, OK, "TIAO", "USB Multi-Protocol Adapter Lite"},
{FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"},
{GOEPEL_VID, GOEPEL_PICOTAP_PID, OK, "GOEPEL", "PicoTAP"},
+ {GOOGLE_VID, GOOGLE_SERVO_PID, OK, "Google", "Servo"},
+ {GOOGLE_VID, GOOGLE_SERVO_V2_PID0, OK, "Google", "Servo V2 Legacy"},
+ {GOOGLE_VID, GOOGLE_SERVO_V2_PID1, OK, "Google", "Servo V2"},
{FIC_VID, OPENMOKO_DBGBOARD_PID, OK, "FIC", "OpenMoko Neo1973 Debug board (V2+)"},
{OLIMEX_VID, OLIMEX_ARM_OCD_PID, OK, "Olimex", "ARM-USB-OCD"},
{OLIMEX_VID, OLIMEX_ARM_TINY_PID, OK, "Olimex", "ARM-USB-TINY"},
@@ -254,6 +262,17 @@
ft2232_vid = OLIMEX_VID;
ft2232_type = OLIMEX_ARM_TINY_H_PID;
channel_count = 2;
+ } else if (!strcasecmp(arg, "google-servo")) {
+ ft2232_vid = GOOGLE_VID;
+ ft2232_type = GOOGLE_SERVO_PID;
+ } else if (!strcasecmp(arg, "google-servo-v2")) {
+ ft2232_vid = GOOGLE_VID;
+ ft2232_type = GOOGLE_SERVO_V2_PID1;
+ /* Default divisor is too fast, and chip ID fails */
+ divisor = 6;
+ } else if (!strcasecmp(arg, "google-servo-v2-legacy")) {
+ ft2232_vid = GOOGLE_VID;
+ ft2232_type = GOOGLE_SERVO_V2_PID0;
} else {
msg_perr("Error: Invalid device type specified.\n");
free(arg);
diff --git a/util/z60_flashrom.rules b/util/z60_flashrom.rules
index 948563c..cfe553e 100644
--- a/util/z60_flashrom.rules
+++ b/util/z60_flashrom.rules
@@ -60,6 +60,12 @@
# http://www.goepel.com/jtagboundary-scan/hardware/picotap.html
ATTRS{idVendor}=="096c", ATTRS{idProduct}=="1449", MODE="664", GROUP="plugdev"
+# Google servo debug board
+# https://www.chromium.org/chromium-os/servo
+ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="5001", MODE="664", GROUP="plugdev"
+ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="5002", MODE="664", GROUP="plugdev"
+ATTRS{idVendor}=="18d1", ATTRS{idProduct}=="5003", MODE="664", GROUP="plugdev"
+
# Olimex ARM-USB-OCD
# http://olimex.com/dev/arm-usb-ocd.html
ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="0003", MODE="664", GROUP="plugdev"