Add a bunch of new/tested stuff and various small changes 21
Tested mainboards:
OK:
- ASUS F2A85-M
Reported by various corebooters
- ASUS M2N-MX SE Plus
Reported by Antonio
- ASUS P5LD2
Reported by François Revol
- Lenovo ThinkPad T530
Reported and partially authored by Edward O'Callaghan
- MSI MS-7502 (Medion MD8833)
Reported by naq on IRC
- Shuttle AB61
Reported by olofolleola4
- ZOTAC IONITX-F-E
Reported by Bernardo Kuri
Flash chips:
- Atmel AT45DB021D to PREW (+PREW)
Reported by The Raven
- Atmel AT25F4096 to PREW (+PREW)
Reported by 공준혁
- GigaDevice GD25Q16(B) to PREW (+PREW)
Reported by luxflow@live.com using a GD25Q16BSIG
- Catalyst CAT28F512
Mark erase and write as known bad (not implemented)
Miscellaneous:
- Various spelling corrections by Daniele Forsi.
- Added and refined a bunch of chips originally investigated by Carl-Daniel.
- Marked the ARM-USB-OCD-H programmer as tested
(reported by Ruud Schramp).
- Tiny other stuff.
Corresponding to flashrom svn r1839.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flashchips.c b/flashchips.c
index a973ddd..68b5dcf 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -1994,7 +1994,7 @@
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_at25f,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -2477,7 +2477,7 @@
/* does not support EWSR nor WREN and has no writable status register bits whatsoever */
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_OTP,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_at45db,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -3158,7 +3158,7 @@
.total_size = 64,
.page_size = 0, /* unused */
.feature_bits = 0,
- .tested = TEST_OK_PR,
+ .tested = {.probe = OK, .read = OK, .erase = BAD, .write = BAD },
.probe = probe_jedec, /* FIXME! */
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -5433,7 +5433,7 @@
.page_size = 256,
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
@@ -6627,7 +6627,7 @@
.block_erase = spi_block_erase_c7,
},
},
- .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continously Program (CP) mode */
+ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */
@@ -7641,7 +7641,7 @@
.block_erasers =
{
{
- .eraseblocks = { {64 * 1024, 8}, },
+ .eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
@@ -10242,9 +10242,9 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
- .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */
+ .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */
.write = spi_chip_write_256,
- .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */
+ .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */
.voltage = {2700, 3600},
},
@@ -10276,15 +10276,15 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
- .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */
+ .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */
.write = spi_chip_write_256,
- .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */
+ .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
- .name = "S25FL116K/S25FL216K",
+ .name = "S25FL116K/S25FL216K", /* FIXME: separate them */
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL216,
@@ -10311,9 +10311,9 @@
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
- .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */
+ .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */
.write = spi_chip_write_256,
- .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */
+ .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */
.voltage = {2700, 3600},
},
@@ -10702,10 +10702,10 @@
{
.vendor = "SST",
- .name = "SST25VF512A",
+ .name = "SST25VF512(A)",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
- .model_id = SST_SST25VF512A_REMS,
+ .model_id = SST_SST25VF512_REMS,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EWSR,
@@ -10722,25 +10722,25 @@
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {32 * 1024, 2} },
- .block_erase = spi_block_erase_d8,
+ .block_erase = spi_block_erase_d8, /* Supported by SST25VF512A only */
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {64 * 1024, 1} },
- .block_erase = spi_block_erase_c7,
+ .block_erase = spi_block_erase_c7, /* Supported by SST25VF512A only */
},
},
.printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */
- .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF512A only */
.voltage = {2700, 3600},
},
{
.vendor = "SST",
- .name = "SST25VF010",
+ .name = "SST25VF010(A)",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF010_REMS,
@@ -10760,19 +10760,19 @@
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {32 * 1024, 4} },
- .block_erase = spi_block_erase_d8,
+ .block_erase = spi_block_erase_d8, /* Supported by SST25VF010A only */
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {128 * 1024, 1} },
- .block_erase = spi_block_erase_c7,
+ .block_erase = spi_block_erase_c7, /* Supported by SST25VF010A only */
},
},
.printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */
- .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF010A only */
.voltage = {2700, 3600},
},
@@ -12157,7 +12157,7 @@
.block_erasers =
{
{
- .eraseblocks = { {64 * 1024, 8}, },
+ .eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
@@ -12249,7 +12249,7 @@
.block_erasers =
{
{
- .eraseblocks = { {16 * 1024, 8}, },
+ .eraseblocks = { {16 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
@@ -12276,7 +12276,7 @@
.block_erasers =
{
{
- .eraseblocks = { {64 * 1024, 8}, },
+ .eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
@@ -12335,7 +12335,7 @@
},
.block_erase = erase_sector_stm50,
}, {
- .eraseblocks = { {64 * 1024, 8}, },
+ .eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_block_82802ab,
}
},
@@ -12368,7 +12368,7 @@
},
.block_erase = erase_sector_stm50,
}, {
- .eraseblocks = { {64 * 1024, 8}, },
+ .eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_block_82802ab,
}
},
@@ -12401,7 +12401,7 @@
},
.block_erase = erase_sector_stm50,
}, {
- .eraseblocks = { {64 * 1024, 16}, },
+ .eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_block_82802ab,
}
},
@@ -12435,7 +12435,7 @@
},
.block_erase = erase_sector_stm50,
}, {
- .eraseblocks = { {64 * 1024, 16}, },
+ .eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_block_82802ab,
}
},
@@ -12495,7 +12495,7 @@
.block_erasers =
{
{
- .eraseblocks = { {64 * 1024, 32}, },
+ .eraseblocks = { {64 * 1024, 32} },
.block_erase = erase_block_82802ab,
}
},
@@ -12520,7 +12520,7 @@
.block_erasers =
{
{
- .eraseblocks = { {64 * 1024, 8}, },
+ .eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_block_82802ab,
}
},
@@ -12545,7 +12545,7 @@
.block_erasers =
{
{
- .eraseblocks = { {64 * 1024, 16}, },
+ .eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_block_82802ab,
}
},
@@ -12570,7 +12570,7 @@
.block_erasers =
{
{
- .eraseblocks = { {64 * 1024, 16}, },
+ .eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_block_82802ab,
}
},
@@ -14318,7 +14318,7 @@
.block_erasers =
{
{
- .eraseblocks = { {64 * 1024, 16}, },
+ .eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {1024 * 1024, 1} },
@@ -14347,7 +14347,7 @@
.block_erasers =
{
{
- .eraseblocks = { {64 * 1024, 8}, },
+ .eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },