Add a bunch of new/tested stuff and various small changes 22
Tested mainboards:
OK:
- AOpen UK79G-1394 (used in EZ18 barebones)
Reported by Lawrence Gough
- ASUS M4N78 SE
Reported by Dima Veselov
- ASUS P5LD2-VM
Mark board enable as tested (reported by Dima Veselov)
- GIGABYTE GA-970A-UD3P (rev. 2.0)
Reported by trucmar on IRC
- GIGABYTE GA-990FXA-UD3 (rev. 4.0)
Reported by ROKO__ on IRC
- GIGABYTE GA-H77-DS3H (rev. 1.1)
Reported by Evgeniy Edigarev
- GIGABYTE GA-P55-USB3 (rev. 2.0)
Reported by Måns Thörnqvist
- MSI MS-7817 (H81M-E33)
Reported by Igor Kolker
Chipsets:
- Marked Intel Bay Trail (0x0f1c) as tested OK
Reported by Antonio Ospite
- Refine Intel IDs
* Add IDs for Braswell
* Add IDs for 9 Series PCHs (e.g. H97, Z97)
* Rename Wellsburg devices slightly
Flash chips:
- Atmel AT25DF041A to PREW (+PREW)
Reported by Tai-hwa Liang
- Atmel AT26DF161 to PREW (+EW)
Reported by Steve Shenton
- Atmel AT45DB011D to PREW (+PREW)
Reported by The Raven
- Atmel AT45DB642D to PREW (+PREW)
Reported by Mahesh Mokal
- Eon EN25F32 to PREW (+PREW)
Reported by Arman Khodabande
- Eon EN25F40 to PREW (+REW)
Reported by Jerrad Pierce
- Eon EN25QH16 to PREW (+EW)
Reported by Ben Johnson
- GigaDevice GD25Q20(B) to PREW (+PREW)
Reported by Gilles Aurejac
- Macronix MX25U6435E/F to PR (+PR)
Reported by Matt Taggart
- PMC Pm25LV512(A) to PREW (+PREW)
Reported by The Raven
- SST SST39VF020 to PREW (+PREW)
Reported by Urja Rannikko
- Winbond W25Q40.V to PREW (+EW)
Reported by Torben Nielsen
- Add E variants of MX25Lx006 (MX25L2006E, MX25L4006E, MX25L8006E).
- Add MX25L6465E variant.
- There was never a MX25L12805 AFAICT.
- Split MX25L12805 from models with the same ID but an additional 32 kB
eraser: MX25L12835F/MX25L12845E/MX25L12865E.
- Add a bunch of ST parallel NOR flash chip IDs.
Miscellaneous:
- Whitelist ThinkPad X200.
- Constify master parameter of register_master().
- Remove FEATURE_BYTEWRITES because it was never used at all.
- Refine hwseq messages and make them less prominent.
- Fix the yet unused PRIxCHIPADDR format string thingy.
- Fix copy&paste error in spi_prettyprint_status_register_bp().
Spotted by Pablo Cases.
- Add an additional SMBus controller revision to identify another Yangtze
model. Thanks to Dan Christensen for reporting this issue.
- dediprog: add missing include for stdlib.h.
This fixes (at least) building on FreeBSD and DragonflyBSD with gcc.
- Remove references to struct pci_filter from programmer.h.
It is only needed in internal.c where it has a complete type. Having
it in programmer.h provokes a warning by some old versions of gcc.
- Tiny other stuff.
Corresponding to flashrom svn r1879.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/ichspi.c b/ichspi.c
index 0cd9c68..1e3f62a 100644
--- a/ichspi.c
+++ b/ichspi.c
@@ -1195,7 +1195,7 @@
struct block_eraser *eraser;
total_size = hwseq_data.size_comp0 + hwseq_data.size_comp1;
- msg_cdbg("Found %d attached SPI flash chip",
+ msg_cdbg("Hardware sequencing reports %d attached SPI flash chip",
(hwseq_data.size_comp1 != 0) ? 2 : 1);
if (hwseq_data.size_comp1 != 0)
msg_cdbg("s with a combined");
@@ -1210,14 +1210,14 @@
erase_size_high = ich_hwseq_get_erase_block_size(boundary);
if (boundary == 0) {
- msg_cdbg("There is only one partition containing the whole "
+ msg_cdbg2("There is only one partition containing the whole "
"address space (0x%06x - 0x%06x).\n", 0, size_high-1);
eraser->eraseblocks[0].size = erase_size_high;
eraser->eraseblocks[0].count = size_high / erase_size_high;
- msg_cdbg("There are %d erase blocks with %d B each.\n",
+ msg_cdbg2("There are %d erase blocks with %d B each.\n",
size_high / erase_size_high, erase_size_high);
} else {
- msg_cdbg("The flash address space (0x%06x - 0x%06x) is divided "
+ msg_cdbg2("The flash address space (0x%06x - 0x%06x) is divided "
"at address 0x%06x in two partitions.\n",
0, total_size-1, boundary);
size_low = total_size - size_high;