Add support for Atmel's AT25F series of SPI flash chips
This adds support for the following chips:
- AT25F512, AT25F512A, AT25F512B
- AT25F1024, AT25F1024A
- AT25F2048
- AT25F4096
Besides the definitions of the the chips in flashchips.c this includes
- a dedicated probing method (probe_spi_at25f)
- pretty printing methods (spi_prettyprint_status_register_at25f*), and
- unlocking methods (spi_disable_blockprotect_at25f*)
Corresponding to flashrom svn r1637.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flashchips.c b/flashchips.c
index 9dd045e..9767c00 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -1667,6 +1667,65 @@
{
.vendor = "Atmel",
+ .name = "AT25F512",
+ .bustype = BUS_SPI,
+ .manufacture_id = ATMEL_ID,
+ .model_id = ATMEL_AT25F512,
+ .total_size = 64,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_at25f,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {32 * 1024, 2} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 1} },
+ .block_erase = spi_block_erase_62,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_at25f,
+ .unlock = spi_disable_blockprotect_at25f,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Atmel",
+ .name = "AT25F512A",
+ .bustype = BUS_SPI,
+ .manufacture_id = ATMEL_ID,
+ .model_id = ATMEL_AT25F512A,
+ .total_size = 64,
+ .page_size = 128,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_at25f,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {32 * 1024, 2} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 1} },
+ .block_erase = spi_block_erase_62,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_at25f512a,
+ /* FIXME: It is not correct to use this one, because the BP1 bit is N/A. */
+ .unlock = spi_disable_blockprotect_at25f512a,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Atmel",
.name = "AT25F512B",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
@@ -1709,6 +1768,95 @@
{
.vendor = "Atmel",
+ /* The A suffix indicates 33MHz instead of 20MHz clock rate.
+ * All other properties seem to be the same.*/
+ .name = "AT25F1024(A)",
+ .bustype = BUS_SPI,
+ .manufacture_id = ATMEL_ID,
+ .model_id = ATMEL_AT25F1024,
+ .total_size = 128,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_at25f,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {32 * 1024, 4} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {128 * 1024, 1} },
+ .block_erase = spi_block_erase_62,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_at25f,
+ .unlock = spi_disable_blockprotect_at25f,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Atmel",
+ .name = "AT25F2048",
+ .bustype = BUS_SPI,
+ .manufacture_id = ATMEL_ID,
+ .model_id = ATMEL_AT25F2048,
+ .total_size = 256,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_at25f,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {64 * 1024, 4} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {256 * 1024, 1} },
+ .block_erase = spi_block_erase_62,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_at25f,
+ .unlock = spi_disable_blockprotect_at25f,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Atmel",
+ .name = "AT25F4096",
+ .bustype = BUS_SPI,
+ .manufacture_id = ATMEL_ID,
+ .model_id = ATMEL_AT25F4096,
+ .total_size = 512,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_at25f,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {64 * 1024, 8} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {512 * 1024, 1} },
+ .block_erase = spi_block_erase_62,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_at25f4096,
+ .unlock = spi_disable_blockprotect_at25f4096,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Atmel",
.name = "AT25FS010",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,