flashchips: Add GigaDevice GD25B512ME..GD55B02GE 3.3V parts
These E versions have different, peculiar IDs (0x47 prefix) and
don't support dual-output/-io commands. They have special non-
volatile dummy-cycle registers, hence we don't support QPI and
block-protection for now.
Datasheets used:
https://www.gigadevice.com.cn/Public/Uploads/uploadfile/files/20230321/DS-00649-GD25B512ME-Rev1.6.pdf
https://www.gigadevice.com.cn/Public/Uploads/uploadfile/files/20241211/DS-00742-GD25R512ME-Rev1.2.pdf
https://www.gigadevice.com.cn/Public/Uploads/uploadfile/files/20230321/DS-00650-GD55B01GE-Rev1.4.pdf
https://www.gigadevice.com.cn/Public/Uploads/uploadfile/files/20230321/DS-00651-GD55B02GE-Rev1.4.pdf
Change-Id: Iffbb5b53383373a5bf677742e2730deaf486883d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.sourcearcade.org/c/flashprog/+/299
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
diff --git a/flashchips.c b/flashchips.c
index 547e288..a7c3c67 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -8265,6 +8265,177 @@
{
.vendor = "GigaDevice",
+ .name = "GD25B512ME/GD25R512ME",
+ .bustype = BUS_SPI,
+ .manufacture_id = GIGADEVICE_ID,
+ .model_id = GIGADEVICE_GD25B512ME,
+ .total_size = 65536,
+ .page_size = 256,
+ /* Supports QPI_38, but with non-volatile DC bits
+ (which probably also affect QIO (0xeb) in SPI mode). */
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR2 | FEATURE_OTP |
+ FEATURE_4BA | FEATURE_FAST_READ_QPI4B | FEATURE_FAST_READ_QOUT,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 16384} },
+ .block_erase = spi_block_erase_21,
+ }, {
+ .eraseblocks = { {4 * 1024, 16384} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 2048} },
+ .block_erase = spi_block_erase_5c,
+ }, {
+ .eraseblocks = { {32 * 1024, 2048} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 1024} },
+ .block_erase = spi_block_erase_dc,
+ }, {
+ .eraseblocks = { {64 * 1024, 1024} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {65536 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {65536 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ /* Has WPS bit in unsupported register. */
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "GigaDevice",
+ .name = "GD55B01GE",
+ .bustype = BUS_SPI,
+ .manufacture_id = GIGADEVICE_ID,
+ .model_id = GIGADEVICE_GD55B01GE,
+ .total_size = 128 * 1024,
+ .page_size = 256,
+ /* Supports QPI_38, but with non-volatile DC bits
+ (which probably also affect QIO (0xeb) in SPI mode). */
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR2 | FEATURE_OTP |
+ FEATURE_4BA | FEATURE_FAST_READ_QPI4B | FEATURE_FAST_READ_QOUT,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 32768} },
+ .block_erase = spi_block_erase_21,
+ }, {
+ .eraseblocks = { {4 * 1024, 32768} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 4096} },
+ .block_erase = spi_block_erase_5c,
+ }, {
+ .eraseblocks = { {32 * 1024, 4096} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 2048} },
+ .block_erase = spi_block_erase_dc,
+ }, {
+ .eraseblocks = { {64 * 1024, 2048} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {128 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {128 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ /* Has WPS bit in unsupported register. */
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "GigaDevice",
+ .name = "GD55B02GE",
+ .bustype = BUS_SPI,
+ .manufacture_id = GIGADEVICE_ID,
+ .model_id = GIGADEVICE_GD55B02GE,
+ .total_size = 256 * 1024,
+ .page_size = 256,
+ /* Supports QPI_38, but with non-volatile DC bits
+ (which probably also affect QIO (0xeb) in SPI mode). */
+ .feature_bits = FEATURE_WRSR_EITHER | FEATURE_WRSR2 | FEATURE_OTP |
+ FEATURE_4BA | FEATURE_FAST_READ_QPI4B | FEATURE_FAST_READ_QOUT,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 65536} },
+ .block_erase = spi_block_erase_21,
+ }, {
+ .eraseblocks = { {4 * 1024, 65536} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 8192} },
+ .block_erase = spi_block_erase_5c,
+ }, {
+ .eraseblocks = { {32 * 1024, 8192} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 4096} },
+ .block_erase = spi_block_erase_dc,
+ }, {
+ .eraseblocks = { {64 * 1024, 4096} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {256 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {256 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ /* Has WPS bit in unsupported register. */
+ .printlock = spi_prettyprint_status_register_bp4_srwd,
+ .unlock = spi_disable_blockprotect_bp4_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2700, 3600},
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "GigaDevice",
.name = "GD25T80",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,