Block eraser conversions and support for Eon EN25B series
Convert chips to block_erasers:
ST_M25PE10
ST_M25PE20
ST_M25PE40
ST_M25PE80
ST_M25PE16
PMC_25LV010
PMC_25LV016B
PMC_25LV020
PMC_25LV040
PMC_25LV080B
PMC_25LV512
PMC_39F010
PMC_49FL002
PMC_49FL004
SANYO_LE25FW203A
SPANSION_S25FL016A
Added spi_block_erase_d7 for PMC chips.
Corresponding to flashrom svn r867.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
diff --git a/spi.c b/spi.c
index 952952f..685c917 100644
--- a/spi.c
+++ b/spi.c
@@ -701,6 +701,48 @@
return 0;
}
+/* Block size is usually
+ * 4k for PMC
+ */
+int spi_block_erase_d7(struct flashchip *flash, unsigned int addr, unsigned int blocklen)
+{
+ int result;
+ struct spi_command cmds[] = {
+ {
+ .writecnt = JEDEC_WREN_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_WREN },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = JEDEC_BE_D7_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_BE_D7, (addr >> 16) & 0xff, (addr >> 8) & 0xff, (addr & 0xff) },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = 0,
+ .writearr = NULL,
+ .readcnt = 0,
+ .readarr = NULL,
+ }};
+
+ result = spi_send_multicommand(cmds);
+ if (result) {
+ fprintf(stderr, "%s failed during command execution at address 0x%x\n",
+ __func__, addr);
+ return result;
+ }
+ /* Wait until the Write-In-Progress bit is cleared.
+ * This usually takes 100-4000 ms, so wait in 100 ms steps.
+ */
+ while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
+ programmer_delay(100 * 1000);
+ if (check_erased_range(flash, addr, blocklen)) {
+ fprintf(stderr, "ERASE FAILED!\n");
+ return -1;
+ }
+ return 0;
+}
+
int spi_chip_erase_d8(struct flashchip *flash)
{
int i, rc = 0;