Allow one to disable programmer debug messages at compile time
Programmer debug messages during programmer init/shutdown are useful
because they print hardware settings and desired configuration.
They help in getting a quick overview of hardware and software state on
startup and shutdown.
Programmer debug messages during flash chip access are mostly a
distraction in logs and should only be enabled if someone is having
problems which are suspected to stem from a programmer hardware or
programmer software bug. Disable those messages by default, they can be
reenabled by #define COMM_DEBUG in the affected programmer file.
An added benefit is a tremendous size reduction in verbose
probe/read/write/erase logs because only flash chip driver messages
remain. In some cases, logs will shrink from 65 MB to 10 kB or less.
The right(tm) fix would be two different debug levels (DEBUG and SPEW)
and the ability to differentiate between programmer debug messages and
flash chip debug messages. Until the design for the message printing
infrastructure is finished, this is the best stop-gap measure we can
get.
Corresponding to flashrom svn r834.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audioahcked@gmail.com>
diff --git a/wbsio_spi.c b/wbsio_spi.c
index 6b9425f..e6b94ad 100644
--- a/wbsio_spi.c
+++ b/wbsio_spi.c
@@ -2,6 +2,7 @@
* This file is part of the flashrom project.
*
* Copyright (C) 2008 Peter Stuge <peter@stuge.se>
+ * Copyright (C) 2009,2010 Carl-Daniel Hailfinger
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,6 +22,17 @@
#include "flash.h"
#include "spi.h"
+/* Change this to #define if you want lowlevel debugging of commands
+ * sent to the Winbond W836xx SPI controller.
+ */
+#undef COMM_DEBUG
+
+#ifdef COMM_DEBUG
+#define msg_comm_debug printf_debug
+#else
+#define msg_comm_debug(...) do {} while (0)
+#endif
+
#define WBSIO_PORT1 0x2e
#define WBSIO_PORT2 0x4e
@@ -62,7 +74,7 @@
if (0 == (wbsio_spibase = wbsio_get_spibase(WBSIO_PORT2)))
return 1;
- printf_debug("\nwbsio_spibase = 0x%x\n", wbsio_spibase);
+ msg_comm_debug("\nwbsio_spibase = 0x%x\n", wbsio_spibase);
buses_supported |= CHIP_BUSTYPE_SPI;
spi_controller = SPI_CONTROLLER_WBSIO;
@@ -96,42 +108,42 @@
int i;
uint8_t mode = 0;
- printf_debug("%s:", __func__);
+ msg_comm_debug("%s:", __func__);
if (1 == writecnt && 0 == readcnt) {
mode = 0x10;
} else if (2 == writecnt && 0 == readcnt) {
OUTB(writearr[1], wbsio_spibase + 4);
- printf_debug(" data=0x%02x", writearr[1]);
+ msg_comm_debug(" data=0x%02x", writearr[1]);
mode = 0x20;
} else if (1 == writecnt && 2 == readcnt) {
mode = 0x30;
} else if (4 == writecnt && 0 == readcnt) {
- printf_debug(" addr=0x%02x", (writearr[1] & 0x0f));
+ msg_comm_debug(" addr=0x%02x", (writearr[1] & 0x0f));
for (i = 2; i < writecnt; i++) {
OUTB(writearr[i], wbsio_spibase + i);
- printf_debug("%02x", writearr[i]);
+ msg_comm_debug("%02x", writearr[i]);
}
mode = 0x40 | (writearr[1] & 0x0f);
} else if (5 == writecnt && 0 == readcnt) {
- printf_debug(" addr=0x%02x", (writearr[1] & 0x0f));
+ msg_comm_debug(" addr=0x%02x", (writearr[1] & 0x0f));
for (i = 2; i < 4; i++) {
OUTB(writearr[i], wbsio_spibase + i);
- printf_debug("%02x", writearr[i]);
+ msg_comm_debug("%02x", writearr[i]);
}
OUTB(writearr[i], wbsio_spibase + i);
- printf_debug(" data=0x%02x", writearr[i]);
+ msg_comm_debug(" data=0x%02x", writearr[i]);
mode = 0x50 | (writearr[1] & 0x0f);
} else if (8 == writecnt && 0 == readcnt) {
- printf_debug(" addr=0x%02x", (writearr[1] & 0x0f));
+ msg_comm_debug(" addr=0x%02x", (writearr[1] & 0x0f));
for (i = 2; i < 4; i++) {
OUTB(writearr[i], wbsio_spibase + i);
- printf_debug("%02x", writearr[i]);
+ msg_comm_debug("%02x", writearr[i]);
}
- printf_debug(" data=0x");
+ msg_comm_debug(" data=0x");
for (; i < writecnt; i++) {
OUTB(writearr[i], wbsio_spibase + i);
- printf_debug("%02x", writearr[i]);
+ msg_comm_debug("%02x", writearr[i]);
}
mode = 0x60 | (writearr[1] & 0x0f);
} else if (5 == writecnt && 4 == readcnt) {
@@ -142,14 +154,14 @@
*/
;
} else if (4 == writecnt && readcnt >= 1 && readcnt <= 4) {
- printf_debug(" addr=0x%02x", (writearr[1] & 0x0f));
+ msg_comm_debug(" addr=0x%02x", (writearr[1] & 0x0f));
for (i = 2; i < writecnt; i++) {
OUTB(writearr[i], wbsio_spibase + i);
- printf_debug("%02x", writearr[i]);
+ msg_comm_debug("%02x", writearr[i]);
}
mode = ((7 + readcnt) << 4) | (writearr[1] & 0x0f);
}
- printf_debug(" cmd=%02x mode=%02x\n", writearr[0], mode);
+ msg_comm_debug(" cmd=%02x mode=%02x\n", writearr[0], mode);
if (!mode) {
fprintf(stderr, "%s: unsupported command type wr=%d rd=%d\n",
@@ -165,12 +177,12 @@
if (!readcnt)
return 0;
- printf_debug("%s: returning data =", __func__);
+ msg_comm_debug("%s: returning data =", __func__);
for (i = 0; i < readcnt; i++) {
readarr[i] = INB(wbsio_spibase + 4 + i);
- printf_debug(" 0x%02x", readarr[i]);
+ msg_comm_debug(" 0x%02x", readarr[i]);
}
- printf_debug("\n");
+ msg_comm_debug("\n");
return 0;
}