Add support for Intel S33 series flash chips
This includes:
Bottom boot block:
* 16Mb/2MB:
QB25F160S33B8, QB25F016S33B8, QH25F160S33B8, QH25F016S33B8
* 32Mb/4MB:
QB25F320S33B8, QH25F320S33B8
* 64Mb/8MB:
QB25F640S33B8, QH25F640S33B8
Top boot block:
* 16Mb/2MB:
QB25F160S33T8, QB25F016S33T8, QH25F160S33T8, QH25F016S33T8
* 32Mb/4MB:
QB25F320S33T8, QH25F320S33T8
* 64Mb/8MB:
QB25F640S33T8, QH25F640S33T8
At least some seem to be marketed by other vendors (too?) but also with
Intel's vendor ID.
Besides a 0xC7 chip erase and a 0xD8 uniform 64kB block erase they
support also erasing the top/bottom 8 8kB blocks with opcode 0x40.
But since this command fails for all addresses outside those ranges,
it is not easily implemented with flashrom's current code base and
hence left out.
Corresponding to flashrom svn r1636.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/chipdrivers.h b/chipdrivers.h
index fe1e598..04ffda6 100644
--- a/chipdrivers.h
+++ b/chipdrivers.h
@@ -77,6 +77,8 @@
int spi_disable_blockprotect_at25f512b(struct flashctx *flash);
int spi_disable_blockprotect_at25fs010(struct flashctx *flash);
int spi_disable_blockprotect_at25fs040(struct flashctx *flash);
+int spi_prettyprint_status_register_s33(struct flashctx *flash);
+int spi_disable_blockprotect_s33(struct flashctx *flash);
int spi_prettyprint_status_register_sst25(struct flashctx *flash);
int spi_prettyprint_status_register_sst25vf016(struct flashctx *flash);
int spi_prettyprint_status_register_sst25vf040b(struct flashctx *flash);