4BA: Basic support for 4-bytes addressing mode extensions
If flash chip is switched to 4-bytes addressing mode then all
read/erase/program instructions will be switched from 3-bytes mode
to 4-bytes mode. Then well known instructions like 03h (Read),
02h (Program) and 20h,52h,D8h (Erase) will become one byte longer
and accept 4-bytes address instead of 3-bytes.
This patch provides support for well known instructions in 4-bytes
addressing mode. Also here is the code to enter 4-bytes addressing
mode by execute the instruction B7h (Enter 4-bytes mode).
Patched files
-------------
chipdrivers.h
+ added functions declarations for spi4ba.c
flash.h
+ feature definitions added
Makefile
+ added spi4ba.c
Added files
-----------
spi4ba.h
+ definitions for 4-bytes addressing JEDEC commands
+ functions declarations from spi4ba.c (same as in chipdrivers.h, just to see)
spi4ba.c
+ functions for enter 4-bytes addressing mode
+ functions for read/write/erase in 4-bytes addressing mode
Change-Id: Ie72e2a89cd75fb4d09f48e81c4c1d927c317b7a7
Signed-off-by: Boris Baykov <dev@borisbaykov.com>, Russia, Jan 2014
[clg: ported from
https://www.flashrom.org/pipermail/flashrom/2015-January/013199.html ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-on: https://review.coreboot.org/20513
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/flash.h b/flash.h
index 67c7d20..611450f 100644
--- a/flash.h
+++ b/flash.h
@@ -119,6 +119,9 @@
#define FEATURE_WRSR_EITHER (FEATURE_WRSR_EWSR | FEATURE_WRSR_WREN)
#define FEATURE_OTP (1 << 8)
#define FEATURE_QPI (1 << 9)
+/* Feature bits used for 4-bytes addressing mode */
+#define FEATURE_4BA_SUPPORT (1 << 10)
+#define FEATURE_4BA_ONLY (1 << 11)
enum test_state {
OK = 0,