Add generalized support for ITE IT8500/IT8502 embedded controllers
The patch was developed by Google.
It was tested for IT8500E on a Chrome OS platform and may require
modification depending on ODM/OEM customization and EC firmware version.
This patch is not officially supported by ITE Tech Inc.
Corresponding to flashrom svn r1262.
Signed-off-by: Donald Huang <donald.huang@ite.com.tw>
Signed-off-by: Yung-chieh Lo <yjlou@google.com>
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
diff --git a/it85spi.c b/it85spi.c
new file mode 100644
index 0000000..8fac3ea
--- /dev/null
+++ b/it85spi.c
@@ -0,0 +1,262 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2007, 2008, 2009 Carl-Daniel Hailfinger
+ * Copyright (C) 2008 Ronald Hoogenboom <ronald@zonnet.nl>
+ * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2010 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*
+ * Contains the ITE IT85* SPI specific routines
+ */
+
+#if defined(__i386__) || defined(__x86_64__)
+
+#include <string.h>
+#include <stdlib.h>
+#include "flash.h"
+#include "chipdrivers.h"
+#include "spi.h"
+#include "programmer.h"
+
+/* Constans for I/O ports */
+#define ITE_SUPERIO_PORT1 0x2e
+#define ITE_SUPERIO_PORT2 0x4e
+
+/* Legacy I/O */
+#define LEGACY_KBC_PORT 0x64
+
+/* Constants for Logical Device registers */
+#define LDNSEL 0x07
+#define CHIP_ID_BYTE1_REG 0x20
+#define CHIP_ID_BYTE2_REG 0x21
+#define CHIP_CHIP_VER_REG 0x22
+
+/* These are standard Super I/O 16-bit base address registers */
+#define SHM_IO_BAD0 0x60 /* big-endian, this is high bits */
+#define SHM_IO_BAD1 0x61
+
+/* IT8502 supports two access modes:
+ * LPC_MEMORY: through the memory window in 0xFFFFFxxx (follow mode)
+ * LPC_IO: through I/O port (so called indirect memory)
+ */
+#undef LPC_MEMORY
+#define LPC_IO
+
+#ifdef LPC_IO
+/* macro to fill in indirect-access registers. */
+#define INDIRECT_A0(base, value) OUTB(value, (base) + 0) /* little-endian */
+#define INDIRECT_A1(base, value) OUTB(value, (base) + 1)
+#define INDIRECT_A2(base, value) OUTB(value, (base) + 2)
+#define INDIRECT_A3(base, value) OUTB(value, (base) + 3)
+#define INDIRECT_READ(base) INB((base) + 4)
+#define INDIRECT_WRITE(base, value) OUTB(value, (base) + 4)
+#endif /* LPC_IO */
+
+#ifdef LPC_IO
+unsigned int shm_io_base;
+#endif
+unsigned char *ce_high, *ce_low;
+static int it85xx_scratch_rom_reenter = 0;
+
+uint16_t probe_id_ite85(uint16_t port)
+{
+ uint16_t id;
+
+ id = sio_read(port, CHIP_ID_BYTE1_REG) << 8 |
+ sio_read(port, CHIP_ID_BYTE2_REG);
+
+ return id;
+}
+
+struct superio probe_superio_ite85xx(void)
+{
+ struct superio ret = {};
+ uint16_t ite_ports[] = {ITE_SUPERIO_PORT1, ITE_SUPERIO_PORT2, 0};
+ uint16_t *i = ite_ports;
+
+ ret.vendor = SUPERIO_VENDOR_ITE;
+ for (; *i; i++) {
+ ret.port = *i;
+ ret.model = probe_id_ite85(ret.port);
+ switch (ret.model >> 8) {
+ case 0x85:
+ msg_pinfo("Found EC: ITE85xx (Vendor:0x%02x,ID:0x%02x,"
+ "Rev:0x%02x) on sio_port:0x%x.\n",
+ ret.model >> 8, ret.model & 0xff,
+ sio_read(ret.port, CHIP_CHIP_VER_REG),
+ ret.port);
+ return ret;
+ }
+ }
+
+ /* No good ID found. */
+ ret.vendor = SUPERIO_VENDOR_NONE;
+ ret.port = 0;
+ ret.model = 0;
+ return ret;
+}
+
+/* IT8502 employs a scratch rom when flash is updating. Call the following two
+ * functions before/after flash erase/program. */
+void it85xx_enter_scratch_rom()
+{
+ if (it85xx_scratch_rom_reenter > 0) return;
+ it85xx_scratch_rom_reenter++;
+ OUTB(0xb4, LEGACY_KBC_PORT);
+}
+
+void it85xx_exit_scratch_rom()
+{
+ if (it85xx_scratch_rom_reenter <= 0) return;
+ it85xx_scratch_rom_reenter = 0;
+ OUTB(0xfe, LEGACY_KBC_PORT);
+}
+
+int it85xx_spi_common_init(void)
+{
+ chipaddr base;
+
+ msg_pdbg("%s():%d superio.vendor=0x%02x\n", __func__, __LINE__,
+ superio.vendor);
+ if (superio.vendor != SUPERIO_VENDOR_ITE)
+ return 1;
+
+#ifdef LPC_IO
+ /* Get LPCPNP of SHM. That's big-endian */
+ sio_write(superio.port, LDNSEL, 0x0F); /* Set LDN to SHM (0x0F) */
+ shm_io_base = (sio_read(superio.port, SHM_IO_BAD0) << 8) +
+ sio_read(superio.port, SHM_IO_BAD1);
+ msg_pdbg("%s():%d shm_io_base=0x%04x\n", __func__, __LINE__,
+ shm_io_base);
+
+ /* These pointers are not used directly. They will be send to EC's
+ * register for indirect access. */
+ base = 0xFFFFF000;
+ ce_high = ((unsigned char*)base) + 0xE00; /* 0xFFFFFE00 */
+ ce_low = ((unsigned char*)base) + 0xD00; /* 0xFFFFFD00 */
+
+ /* pre-set indirect-access registers since in most of cases they are
+ * 0xFFFFxx00. */
+ INDIRECT_A0(shm_io_base, base & 0xFF);
+ INDIRECT_A2(shm_io_base, (base >> 16) & 0xFF);
+ INDIRECT_A3(shm_io_base, (base >> 24));
+#endif
+#ifdef LPC_MEMORY
+ base = (chipaddr)programmer_map_flash_region("flash base", 0xFFFFF000,
+ 0x1000);
+ msg_pdbg("%s():%d base=0x%08x\n", __func__, __LINE__,
+ (unsigned int)base);
+ ce_high = (unsigned char*)(base + 0xE00); /* 0xFFFFFE00 */
+ ce_low = (unsigned char*)(base + 0xD00); /* 0xFFFFFD00 */
+#endif
+
+ /* Set this as spi controller. */
+ spi_controller = SPI_CONTROLLER_IT85XX;
+
+ return 0;
+}
+
+/* Called by programmer_entry .init */
+int it85xx_spi_init(void)
+{
+ int ret;
+
+ get_io_perms();
+ /* Probe for the Super I/O chip and fill global struct superio. */
+ probe_superio();
+ ret = it85xx_spi_common_init();
+ if (!ret) {
+ buses_supported = CHIP_BUSTYPE_SPI;
+ } else {
+ buses_supported = CHIP_BUSTYPE_NONE;
+ }
+ return ret;
+}
+
+/* Called by internal_init() */
+int it85xx_probe_spi_flash(const char *name)
+{
+ int ret;
+
+ if (!(buses_supported & CHIP_BUSTYPE_FWH)) {
+ msg_pdbg("%s():%d buses not support FWH\n", __func__, __LINE__);
+ return 1;
+ }
+ ret = it85xx_spi_common_init();
+ msg_pdbg("FWH: %s():%d ret=%d\n", __func__, __LINE__, ret);
+ if (!ret) {
+ msg_pdbg("%s():%d buses_supported=0x%x\n", __func__, __LINE__,
+ buses_supported);
+ if (buses_supported & CHIP_BUSTYPE_FWH)
+ msg_pdbg("Overriding chipset SPI with IT85 FWH|SPI.\n");
+ buses_supported |= CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI;
+ }
+ return ret;
+}
+
+int it85xx_shutdown(void)
+{
+ msg_pdbg("%s():%d\n", __func__, __LINE__);
+ it85xx_exit_scratch_rom();
+ return 0;
+}
+
+/* According to ITE 8502 document, the procedure to follow mode is following:
+ * 1. write 0x00 to LPC/FWH address 0xffff_fexxh (drive CE# high)
+ * 2. write data to LPC/FWH address 0xffff_fdxxh (drive CE# low and MOSI
+ * with data)
+ * 3. read date from LPC/FWH address 0xffff_fdxxh (drive CE# low and get
+ * data from MISO)
+ */
+int it85xx_spi_send_command(unsigned int writecnt, unsigned int readcnt,
+ const unsigned char *writearr, unsigned char *readarr)
+{
+ int i;
+
+ it85xx_enter_scratch_rom();
+ /* exit scratch rom ONLY when programmer shuts down. Otherwise, the
+ * temporary flash state may halt EC. */
+
+#ifdef LPC_IO
+ INDIRECT_A1(shm_io_base, (((unsigned long int)ce_high) >> 8) & 0xff);
+ INDIRECT_WRITE(shm_io_base, 0xFF); /* Write anything to this address.*/
+ INDIRECT_A1(shm_io_base, (((unsigned long int)ce_low) >> 8) & 0xff);
+#endif
+#ifdef LPC_MEMORY
+ *ce_high = 0;
+#endif
+ for (i = 0; i < writecnt; ++i) {
+#ifdef LPC_IO
+ INDIRECT_WRITE(shm_io_base, writearr[i]);
+#endif
+#ifdef LPC_MEMORY
+ *ce_low = writearr[i];
+#endif
+ }
+ for (i = 0; i < readcnt; ++i) {
+#ifdef LPC_IO
+ readarr[i] = INDIRECT_READ(shm_io_base);
+#endif
+#ifdef LPC_MEMORY
+ readarr[i] = *ce_low;
+#endif
+ }
+ return 0;
+}
+
+#endif