Trivial README change Flashrom->flashrom
Corresponding to flashrom svn r433 and coreboot v2 svn r4141.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
diff --git a/README b/README
index 2d26877..b13d1a7 100644
--- a/README
+++ b/README
@@ -1,8 +1,8 @@
-------------------------------------------------------------------------------
-Flashrom README
+flashrom README
-------------------------------------------------------------------------------
-Flashrom is a utility for reading, writing, and erasing flash ROM chips.
+flashrom is a utility for reading, writing, and erasing flash ROM chips.
It's often used to flash BIOS/coreboot/firmware images.
It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, and
@@ -51,14 +51,14 @@
Exit status
-----------
-Flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem
+flashrom exits with 0 on success, 1 on most failures but with 2 if /dev/mem
(/dev/xsvc on Solaris) can not be opened and with 3 if a call to mmap() fails.
coreboot Table and Mainboard Identification
--------------------------------------------
-Flashrom reads the coreboot table to determine the current mainboard. If no
+flashrom reads the coreboot table to determine the current mainboard. If no
coreboot table could be read or if you want to override these values, you can
specify -m, e.g.:
@@ -72,7 +72,7 @@
ROM Layout Support
------------------
-Flashrom supports ROM layouts. This allows you to flash certain parts of
+flashrom supports ROM layouts. This allows you to flash certain parts of
the flash chip only. A ROM layout file looks like follows:
00000000:00008fff gfxrom