DOS refinements
This allows to use the DOS library trees stored in a user-specified directory.
I have mirrored the needed patches, sources and binaries (the latter
are properly licensed to allow that) in the flashrom wiki, so use those
URLs instead of the original sources.
Corresponding to flashrom svn r1734.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/README b/README
index 7f24cca..a096aad 100644
--- a/README
+++ b/README
@@ -105,20 +105,24 @@
djcrx-2.04pre_20090725-13ap.i386.rpm
The cross toolchain packages for your distribution may have slightly different
names (look for packages named *djgpp*).
- Download pciutils 3.1.5 and apply http://assembler.cz/flashrom/pciutils.patch
- Download and compile http://assembler.cz/flashrom/libgetopt/
+
+ You will need the following library source trees containing their compiled
+ static libraries either in the parent directory of the flashrom source or
+ specify the base folder on compile time with the DOSLIBS_BASE parameter.
+ The default as described above is equal to calling
+ 'make djgpp-dos DOSLIBS_BASE=..'
+
+ To get and build said libraries...
+ Download pciutils 3.1.5 and apply http://flashrom.org/File:Pciutils.patch.gz
Compile pciutils, see README.DJGPP for instructions.
+ Download and compile http://flashrom.org/File:Libgetopt.tar.gz
Enter the flashrom directory.
- ../libpci should contain pciutils source and binaries.
- ../libgetopt should contain getopt.a from libgetopt.
Run either (change settings where appropriate)
make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip
or (above settings hardcoded)
make djgpp-dos
- You might have to add WARNERROR=no to the make command line.
- To run flashrom.exe, download and unpack
- http://homer.rice.edu/~sandmann/cwsdpmi/csdpmi7b.zip and make sure
- CWSDPMI.EXE is in the current directory.
+ To run flashrom.exe, download http://flashrom.org/File:Csdpmi7b.zip and
+ unpack CWSDPMI.EXE into the current directory or one in PATH.
To cross-compile on Linux for Windows: