diff --git a/atahpt.c b/atahpt.c
index eac056e..82b430d 100644
--- a/atahpt.c
+++ b/atahpt.c
@@ -44,8 +44,7 @@
 
 	get_io_perms();
 
-	io_base_addr = pcidev_init(PCI_VENDOR_ID_HPT, PCI_BASE_ADDRESS_4,
-				   ata_hpt);
+	io_base_addr = pcidev_init(PCI_BASE_ADDRESS_4, ata_hpt);
 
 	/* Enable flash access. */
 	reg32 = pci_read_long(pcidev_dev, REG_FLASH_ACCESS);
diff --git a/drkaiser.c b/drkaiser.c
index 984dbdd..207c738 100644
--- a/drkaiser.c
+++ b/drkaiser.c
@@ -43,8 +43,7 @@
 
 	get_io_perms();
 
-	addr = pcidev_init(PCI_VENDOR_ID_DRKAISER, PCI_BASE_ADDRESS_2,
-			   drkaiser_pcidev);
+	addr = pcidev_init(PCI_BASE_ADDRESS_2, drkaiser_pcidev);
 
 	/* Write magic register to enable flash write. */
 	rpci_write_word(pcidev_dev, PCI_MAGIC_DRKAISER_ADDR,
diff --git a/flashrom.c b/flashrom.c
index 4c6c1fa..cfb8e5f 100644
--- a/flashrom.c
+++ b/flashrom.c
@@ -61,7 +61,6 @@
 #endif
 #if CONFIG_NICREALTEK == 1
 	PROGRAMMER_NICREALTEK
-	PROGRAMMER_NICREALTEK2
 #endif
 #if CONFIG_NICNATSEMI == 1
 	PROGRAMMER_NICNATSEMI
@@ -182,7 +181,9 @@
 
 #if CONFIG_NICREALTEK == 1
 	{
+		/* This programmer works for Realtek RTL8139 and SMC 1211. */
 		.name                   = "nicrealtek",
+		//.name                   = "nicsmc1211",
 		.init                   = nicrealtek_init,
 		.shutdown               = nicrealtek_shutdown,
 		.map_flash_region       = fallback_map,
@@ -197,22 +198,6 @@
 		.chip_writen            = fallback_chip_writen,
 		.delay                  = internal_delay,
 	},
-	{
-		.name                   = "nicsmc1211",
-		.init                   = nicsmc1211_init,
-		.shutdown               = nicrealtek_shutdown,
-		.map_flash_region       = fallback_map,
-		.unmap_flash_region     = fallback_unmap,
-		.chip_readb             = nicrealtek_chip_readb,
-		.chip_readw             = fallback_chip_readw,
-		.chip_readl             = fallback_chip_readl,
-		.chip_readn             = fallback_chip_readn,
-		.chip_writeb            = nicrealtek_chip_writeb,
-		.chip_writew            = fallback_chip_writew,
-		.chip_writel            = fallback_chip_writel,
-		.chip_writen            = fallback_chip_writen,
-		.delay                  = internal_delay,
-	},
 #endif
 
 #if CONFIG_NICNATSEMI == 1
diff --git a/gfxnvidia.c b/gfxnvidia.c
index b6dc5f4..60498b1 100644
--- a/gfxnvidia.c
+++ b/gfxnvidia.c
@@ -66,8 +66,7 @@
 
 	get_io_perms();
 
-	io_base_addr = pcidev_init(PCI_VENDOR_ID_NVIDIA, PCI_BASE_ADDRESS_0,
-				   gfx_nvidia);
+	io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, gfx_nvidia);
 
 	io_base_addr += 0x300000;
 	msg_pinfo("Detected NVIDIA I/O base address: 0x%x.\n", io_base_addr);
diff --git a/nic3com.c b/nic3com.c
index 0eb781a..d39ee71 100644
--- a/nic3com.c
+++ b/nic3com.c
@@ -59,8 +59,7 @@
 {
 	get_io_perms();
 
-	io_base_addr = pcidev_init(PCI_VENDOR_ID_3COM, PCI_BASE_ADDRESS_0,
-				   nics_3com);
+	io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_3com);
 
 	id = pcidev_dev->device_id;
 
diff --git a/nicintel_spi.c b/nicintel_spi.c
index 2d2d5b2..3882e81 100644
--- a/nicintel_spi.c
+++ b/nicintel_spi.c
@@ -144,8 +144,7 @@
 
 	get_io_perms();
 
-	io_base_addr = pcidev_init(PCI_VENDOR_ID_INTEL, PCI_BASE_ADDRESS_0,
-				   nics_intel_spi);
+	io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_intel_spi);
 
 	nicintel_spibar = physmap("Intel Gigabit NIC w/ SPI flash",
 				  io_base_addr, 4096);
diff --git a/nicnatsemi.c b/nicnatsemi.c
index 1683857..3cae253 100644
--- a/nicnatsemi.c
+++ b/nicnatsemi.c
@@ -39,8 +39,7 @@
 {
 	get_io_perms();
 
-	io_base_addr = pcidev_init(PCI_VENDOR_ID_NATSEMI, PCI_BASE_ADDRESS_0,
-				   nics_natsemi);
+	io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_natsemi);
 
 	buses_supported = CHIP_BUSTYPE_PARALLEL;
 
diff --git a/nicrealtek.c b/nicrealtek.c
index c32e5d6..d97deb1 100644
--- a/nicrealtek.c
+++ b/nicrealtek.c
@@ -32,10 +32,6 @@
 
 const struct pcidev_status nics_realtek[] = {
 	{0x10ec, 0x8139, OK, "Realtek", "RTL8139/8139C/8139C+"},
-	{},
-};
-
-const struct pcidev_status nics_realteksmc1211[] = {
 	{0x1113, 0x1211, OK, "SMC2", "1211TX"}, /* RTL8139 clone */
 	{},
 };
@@ -44,20 +40,7 @@
 {
 	get_io_perms();
 
-	io_base_addr = pcidev_init(PCI_VENDOR_ID_REALTEK, PCI_BASE_ADDRESS_0,
-				   nics_realtek);
-
-	buses_supported = CHIP_BUSTYPE_PARALLEL;
-
-	return 0;
-}
-
-int nicsmc1211_init(void)
-{
-	get_io_perms();
-
-	io_base_addr = pcidev_init(PCI_VENDOR_ID_SMC1211, PCI_BASE_ADDRESS_0,
-				   nics_realteksmc1211);
+	io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, nics_realtek);
 
 	buses_supported = CHIP_BUSTYPE_PARALLEL;
 
diff --git a/ogp_spi.c b/ogp_spi.c
index fb52a8c..6932f06 100644
--- a/ogp_spi.c
+++ b/ogp_spi.c
@@ -120,8 +120,7 @@
 
 	get_io_perms();
 
-	io_base_addr = pcidev_init(PCI_VENDOR_ID_OGP, PCI_BASE_ADDRESS_0,
-				   ogp_spi);
+	io_base_addr = pcidev_init(PCI_BASE_ADDRESS_0, ogp_spi);
 
 	ogp_spibar = physmap("OGP registers", io_base_addr, 4096);
 
diff --git a/pcidev.c b/pcidev.c
index 5eddf79..e498014 100644
--- a/pcidev.c
+++ b/pcidev.c
@@ -188,8 +188,7 @@
 	return 0;
 }
 
-uintptr_t pcidev_init(uint16_t vendor_id, int bar,
-		     const struct pcidev_status *devs)
+uintptr_t pcidev_init(int bar, const struct pcidev_status *devs)
 {
 	struct pci_dev *dev;
 	struct pci_filter filter;
@@ -203,8 +202,7 @@
 	pci_scan_bus(pacc);     /* We want to get the list of devices */
 	pci_filter_init(pacc, &filter);
 
-	/* Filter by vendor and also bb:dd.f (if supplied by the user). */
-	filter.vendor = vendor_id;
+	/* Filter by bb:dd.f (if supplied by the user). */
 	pcidev_bdf = extract_programmer_param("pci");
 	if (pcidev_bdf != NULL) {
 		if ((msg = pci_filter_parse_slot(&filter, pcidev_bdf))) {
@@ -216,6 +214,9 @@
 
 	for (dev = pacc->devices; dev; dev = dev->next) {
 		if (pci_filter_match(&filter, dev)) {
+			/* FIXME: We should count all matching devices, not
+			 * just those with a valid BAR.
+			 */
 			if ((addr = pcidev_validate(dev, bar, devs)) != 0) {
 				curaddr = addr;
 				pcidev_dev = dev;
diff --git a/print.c b/print.c
index add2115..b939f67 100644
--- a/print.c
+++ b/print.c
@@ -249,9 +249,6 @@
 	printf("\nSupported devices for the %s programmer:\n",
 	       programmer_table[PROGRAMMER_NICREALTEK].name);
 	print_supported_pcidevs(nics_realtek);
-	printf("\nSupported devices for the %s programmer:\n",
-	       programmer_table[PROGRAMMER_NICREALTEK2].name);
-	print_supported_pcidevs(nics_realteksmc1211);
 #endif
 #if CONFIG_NICNATSEMI == 1
 	printf("\nSupported devices for the %s programmer:\n",
diff --git a/print_wiki.c b/print_wiki.c
index d71c571..7b354d9 100644
--- a/print_wiki.c
+++ b/print_wiki.c
@@ -279,7 +279,6 @@
 #endif
 #if CONFIG_NICREALTEK == 1
 	print_supported_pcidevs_wiki(nics_realtek);
-	print_supported_pcidevs_wiki(nics_realteksmc1211);
 #endif
 #if CONFIG_NICNATSEMI == 1
 	print_supported_pcidevs_wiki(nics_natsemi);
diff --git a/programmer.h b/programmer.h
index 7a497f8..47b3e4a 100644
--- a/programmer.h
+++ b/programmer.h
@@ -36,7 +36,6 @@
 #endif
 #if CONFIG_NICREALTEK == 1
 	PROGRAMMER_NICREALTEK,
-	PROGRAMMER_NICREALTEK2,
 #endif
 #if CONFIG_NICNATSEMI == 1
 	PROGRAMMER_NICNATSEMI,
@@ -220,7 +219,7 @@
 	const char *device_name;
 };
 uintptr_t pcidev_validate(struct pci_dev *dev, int bar, const struct pcidev_status *devs);
-uintptr_t pcidev_init(uint16_t vendor_id, int bar, const struct pcidev_status *devs);
+uintptr_t pcidev_init(int bar, const struct pcidev_status *devs);
 /* rpci_write_* are reversible writes. The original PCI config space register
  * contents will be restored on shutdown.
  */
@@ -384,12 +383,10 @@
 /* nicrealtek.c */
 #if CONFIG_NICREALTEK == 1
 int nicrealtek_init(void);
-int nicsmc1211_init(void);
 int nicrealtek_shutdown(void);
 void nicrealtek_chip_writeb(uint8_t val, chipaddr addr);
 uint8_t nicrealtek_chip_readb(const chipaddr addr);
 extern const struct pcidev_status nics_realtek[];
-extern const struct pcidev_status nics_realteksmc1211[];
 #endif
 
 /* nicnatsemi.c */
diff --git a/satamv.c b/satamv.c
index d7db7e9..2e5af6c 100644
--- a/satamv.c
+++ b/satamv.c
@@ -67,7 +67,7 @@
 	/* No need to check for errors, pcidev_init() will not return in case
 	 * of errors.
 	 */
-	addr = pcidev_init(0x11ab, PCI_BASE_ADDRESS_0, satas_mv);
+	addr = pcidev_init(PCI_BASE_ADDRESS_0, satas_mv);
 
 	mv_bar = physmap("Marvell 88SX7042 registers", addr, 0x20000);
 	if (mv_bar == ERROR_PTR)
diff --git a/satasii.c b/satasii.c
index 89f45b9..9d05b2d 100644
--- a/satasii.c
+++ b/satasii.c
@@ -47,7 +47,7 @@
 
 	get_io_perms();
 
-	pcidev_init(PCI_VENDOR_ID_SII, PCI_BASE_ADDRESS_0, satas_sii);
+	pcidev_init(PCI_BASE_ADDRESS_0, satas_sii);
 
 	id = pcidev_dev->device_id;