Add support for M95M02-A125
Automotive 2 Mbit (256KiB) serial SPI bus EEPROM
PREW tested successfully with use of ch341a programmer
on Linux host 5.2.0-1-MANJARO x86_64
Signed-off-by: Konstantin Grudnev <grudnevkv@gmail.com>
Change-Id: Ic29cd9051c7eac4822d620c299834134f987f01b
Reviewed-on: https://review.coreboot.org/c/flashrom/+/34496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
diff --git a/flashchips.c b/flashchips.c
index 7635942..65110fe 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -14240,6 +14240,33 @@
},
{
+ .vendor = "ST",
+ .name = "M95M02",
+ .bustype = BUS_SPI,
+ .manufacture_id = ST_ID,
+ .model_id = ST_M95M02,
+ .total_size = 256,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_NO_ERASE | FEATURE_ERASED_ZERO,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_st95,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {256 * 1024, 1} },
+ .block_erase = spi_block_erase_emulation,
+ }
+ },
+
+ .printlock = spi_prettyprint_status_register_bp1_srwd,
+ .unlock = spi_disable_blockprotect_bp1_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {2500, 5500},
+ },
+
+ {
.vendor = "Sanyo",
.name = "LE25FU106B",
.bustype = BUS_SPI,