#
# This file is part of the flashrom project.
#
# Copyright (C) 2005 coresystems GmbH <stepan@coresystems.de>
# Copyright (C) 2009,2010,2012 Carl-Daniel Hailfinger
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#

include Makefile.include

PROGRAM = flashrom

###############################################################################
# Defaults for the toolchain.

# If you want to cross-compile, just run e.g.
# make CC=i586-pc-msdosdjgpp-gcc
# You may have to specify STRIP/AR/RANLIB as well.
#
# Note for anyone editing this Makefile: gnumake will happily ignore any
# changes in this Makefile to variables set on the command line.
STRIP   ?= strip
STRIP_ARGS = -s
INSTALL = install
DIFF    = diff
PREFIX  ?= /usr/local
MANDIR  ?= $(PREFIX)/share/man
CFLAGS  ?= -Os -Wall -Wextra -Wno-unused-parameter -Wshadow -Wmissing-prototypes -Wwrite-strings
EXPORTDIR ?= .
RANLIB  ?= ranlib
PKG_CONFIG ?= pkg-config
BUILD_DETAILS_FILE ?= build_details.txt

# The following parameter changes the default programmer that will be used if there is no -p/--programmer
# argument given when running flashrom. The predefined setting does not enable any default so that every
# user has to declare the programmer he wants to use on every run. The rationale for this to be not set
# (to e.g. the internal programmer) is that forgetting to specify this when working with another programmer
# easily puts the system attached to the default programmer at risk (e.g. you want to flash coreboot to another
# system attached to an external programmer while the default programmer is set to the internal programmer, and
# you forget to use the -p parameter. This would (try to) overwrite the existing firmware of the computer
# running flashrom). Please do not enable this without thinking about the possible consequences. Possible
# values can be found when running 'flashrom --list-supported' under the 'Supported programmers' section.
CONFIG_DEFAULT_PROGRAMMER_NAME ?=
# The following adds a default parameter for the default programmer set above (only).
CONFIG_DEFAULT_PROGRAMMER_ARGS ?=
# Example: compiling with
#   make CONFIG_DEFAULT_PROGRAMMER_NAME=serprog CONFIG_DEFAULT_PROGRAMMER_ARGS="dev=/dev/ttyUSB0:1500000"
# would make executing './flashrom' (almost) equivialent to './flashrom -p serprog:dev=/dev/ttyUSB0:1500000'.

# If your compiler spits out excessive warnings, run make WARNERROR=no
# You shouldn't have to change this flag.
WARNERROR ?= yes

ifeq ($(WARNERROR), yes)
CFLAGS += -Werror
endif

ifdef LIBS_BASE
PKG_CONFIG_LIBDIR ?= $(LIBS_BASE)/lib/pkgconfig
override CPPFLAGS += -I$(LIBS_BASE)/include
override LDFLAGS += -L$(LIBS_BASE)/lib -Wl,-rpath -Wl,$(LIBS_BASE)/lib
endif

ifeq ($(CONFIG_STATIC),yes)
override PKG_CONFIG += --static
override LDFLAGS += -static
endif

# Set LC_ALL=C to minimize influences of the locale.
# However, this won't work for the majority of relevant commands because they use the $(shell) function and
# GNU make does not relay variables exported within the makefile to their environment.
LC_ALL=C
export LC_ALL

dummy_for_make_3_80:=$(shell printf "Build started on %s\n\n" "$$(date)" >$(BUILD_DETAILS_FILE))

# Provide an easy way to execute a command, print its output to stdout and capture any error message on stderr
# in the build details file together with the original stdout output.
debug_shell = $(shell export LC_ALL=C ; { echo 'exec: export LC_ALL=C ; { $(subst ','\'',$(1)) ; }' >&2; \
    { $(1) ; } | tee -a $(BUILD_DETAILS_FILE) ; echo >&2 ; } 2>>$(BUILD_DETAILS_FILE))

###############################################################################
# Dependency handling.

DEPENDS_ON_SERIAL := \
	CONFIG_BUSPIRATE_SPI \
	CONFIG_PONY_SPI \
	CONFIG_SERPROG \

DEPENDS_ON_BITBANG_SPI := \
	CONFIG_DEVELOPERBOX_SPI \
	CONFIG_INTERNAL \
	CONFIG_NICINTEL_SPI \
	CONFIG_OGP_SPI \
	CONFIG_PONY_SPI \
	CONFIG_RAYER_SPI \

DEPENDS_ON_LIBPCI := \
	CONFIG_ATAHPT \
	CONFIG_ATAPROMISE \
	CONFIG_ATAVIA \
	CONFIG_DRKAISER \
	CONFIG_GFXNVIDIA \
	CONFIG_INTERNAL \
	CONFIG_IT8212 \
	CONFIG_NIC3COM \
	CONFIG_NICINTEL \
	CONFIG_NICINTEL_EEPROM \
	CONFIG_NICINTEL_SPI \
	CONFIG_NICNATSEMI \
	CONFIG_NICREALTEK \
	CONFIG_OGP_SPI \
	CONFIG_SATAMV \
	CONFIG_SATASII \

DEPENDS_ON_LIBUSB1 := \
	CONFIG_CH341A_SPI \
	CONFIG_DEDIPROG \
	CONFIG_DEVELOPERBOX_SPI \
	CONFIG_DIGILENT_SPI \
	CONFIG_PICKIT2_SPI \
	CONFIG_RAIDEN_DEBUG_SPI \
	CONFIG_STLINKV3_SPI \
	CONFIG_DIRTYJTAG_SPI \

DEPENDS_ON_LIBFTDI := \
	CONFIG_FT2232_SPI \
	CONFIG_USBBLASTER_SPI \

DEPENDS_ON_LIBJAYLINK := \
	CONFIG_JLINK_SPI \


ifeq ($(CONFIG_ENABLE_LIBUSB1_PROGRAMMERS), no)
$(call disable_all,$(DEPENDS_ON_LIBUSB1))
endif

ifeq ($(CONFIG_ENABLE_LIBPCI_PROGRAMMERS), no)
$(call disable_all,$(DEPENDS_ON_LIBPCI))
endif

###############################################################################
# General OS-specific settings.
# 1. Prepare for later by gathering information about host and target OS
# 2. Set compiler flags and parameters according to OSes
# 3. Likewise verify user-supplied CONFIG_* variables.

# HOST_OS is only used to work around local toolchain issues.
HOST_OS ?= $(shell uname)
ifeq ($(findstring MINGW, $(HOST_OS)), MINGW)
# Explicitly set CC = gcc on MinGW, otherwise: "cc: command not found".
CC = gcc
endif

# Determine the destination OS, architecture and endian
# IMPORTANT: The following lines must be placed before TARGET_OS, ARCH or ENDIAN
# is ever used (of course), but should come after any lines setting CC because
# the lines below use CC itself.
override TARGET_OS := $(call c_macro_test, Makefile.d/os_test.h)
override ARCH      := $(call c_macro_test, Makefile.d/arch_test.h)
override ENDIAN    := $(call c_macro_test, Makefile.d/endian_test.h)

ifeq ($(TARGET_OS), $(filter $(TARGET_OS), FreeBSD OpenBSD DragonFlyBSD))
override CPPFLAGS += -I/usr/local/include
override LDFLAGS += -L/usr/local/lib
endif

ifeq ($(TARGET_OS), Darwin)
override CPPFLAGS += -I/opt/local/include -I/usr/local/include
override LDFLAGS += -L/opt/local/lib -L/usr/local/lib
endif

ifeq ($(TARGET_OS), NetBSD)
# Needs special `pciutils/pci.h` for older NetBSD packages
PCIUTILS_PCI_H := $(shell [ -f /usr/pkg/include/pciutils/pci.h ] && echo -DPCIUTILS_PCI_H)
override CPPFLAGS += -I/usr/pkg/include $(PCIUTILS_PCI_H)
override LDFLAGS += -L/usr/pkg/lib
endif

ifeq ($(TARGET_OS), DOS)
EXEC_SUFFIX := .exe
# DJGPP has odd uint*_t definitions which cause lots of format string warnings.
override CFLAGS += -Wno-format
LIBS += -lgetopt
# Missing serial support.
$(call mark_unsupported,$(DEPENDS_ON_SERIAL))
# Libraries not available for DOS
$(call mark_unsupported,$(DEPENDS_ON_LIBUSB1) $(DEPENDS_ON_LIBFTDI) $(DEPENDS_ON_LIBJAYLINK))
endif

ifeq ($(TARGET_OS), $(filter $(TARGET_OS), MinGW Cygwin))
FEATURE_CFLAGS += -D'IS_WINDOWS=1'
else
FEATURE_CFLAGS += -D'IS_WINDOWS=0'
endif

# FIXME: Should we check for Cygwin/MSVC as well?
ifeq ($(TARGET_OS), MinGW)
EXEC_SUFFIX := .exe
# MinGW doesn't have the ffs() function, but we can use gcc's __builtin_ffs().
FLASHROM_CFLAGS += -Dffs=__builtin_ffs
# Some functions provided by Microsoft do not work as described in C99 specifications. This macro fixes that
# for MinGW. See http://sourceforge.net/p/mingw-w64/wiki2/printf%20and%20scanf%20family/ */
FLASHROM_CFLAGS += -D__USE_MINGW_ANSI_STDIO=1

# For now we disable all PCI-based programmers on Windows/MinGW (no libpci).
$(call mark_unsupported,$(DEPENDS_ON_LIBPCI))
# And programmers that need raw access.
$(call mark_unsupported,CONFIG_RAYER_SPI)

else # No MinGW

# NI USB-845x only supported on Windows at the moment
$(call mark_unsupported,CONFIG_NI845X_SPI)

endif

ifeq ($(TARGET_OS), libpayload)
ifeq ($(MAKECMDGOALS),)
.DEFAULT_GOAL := libflashrom.a
$(info Setting default goal to libflashrom.a)
endif
FLASHROM_CFLAGS += -DSTANDALONE
$(call mark_unsupported,CONFIG_DUMMY)
# libpayload does not provide the romsize field in struct pci_dev that the atapromise code requires.
$(call mark_unsupported,CONFIG_ATAPROMISE)
# Bus Pirate, Serprog and PonyProg are not supported with libpayload (missing serial support).
$(call mark_unsupported,CONFIG_BUSPIRATE_SPI CONFIG_SERPROG CONFIG_PONY_SPI)
# Dediprog, Developerbox, USB-Blaster, PICkit2, CH341A and FT2232 are not supported with libpayload (missing libusb support).
$(call mark_unsupported,$(DEPENDS_ON_LIBUSB1) $(DEPENDS_ON_LIBFTDI) $(DEPENDS_ON_LIBJAYLINK))
endif

# Android is handled internally as separate OS, but it supports about the same drivers as Linux.
ifeq ($(filter $(TARGET_OS),Linux Android), )
$(call mark_unsupported,CONFIG_LINUX_MTD CONFIG_LINUX_SPI)
$(call mark_unsupported,CONFIG_MSTARDDC_SPI)
endif

ifeq ($(TARGET_OS), Android)
# Android on x86 (currently) does not provide raw PCI port I/O operations.
$(call mark_unsupported,CONFIG_RAYER_SPI)
endif

# Disable the internal programmer on unsupported architectures (everything but x86 and mipsel)
ifneq ($(ARCH)-little, $(filter $(ARCH),x86 mips)-$(ENDIAN))
$(call mark_unsupported,CONFIG_INTERNAL)
endif

ifeq ($(ENDIAN), little)
FEATURE_CFLAGS += -D'__FLASHROM_LITTLE_ENDIAN__=1'
endif
ifeq ($(ENDIAN), big)
FEATURE_CFLAGS += -D'__FLASHROM_BIG_ENDIAN__=1'
endif

# PCI port I/O support is unimplemented on PPC/MIPS/SPARC and unavailable on ARM.
# Right now this means the drivers below only work on x86.
ifneq ($(ARCH), x86)
$(call mark_unsupported,CONFIG_NIC3COM CONFIG_NICREALTEK CONFIG_NICNATSEMI)
$(call mark_unsupported,CONFIG_RAYER_SPI CONFIG_ATAHPT CONFIG_ATAPROMISE)
$(call mark_unsupported,CONFIG_SATAMV)
endif

# Additionally disable all drivers needing raw access (memory, PCI, port I/O)
# on architectures with unknown raw access properties.
# Right now those architectures are alpha hppa m68k sh s390
ifneq ($(ARCH),$(filter $(ARCH),x86 mips ppc arm sparc arc))
$(call mark_unsupported,CONFIG_GFXNVIDIA CONFIG_SATASII CONFIG_ATAVIA)
$(call mark_unsupported,CONFIG_DRKAISER CONFIG_NICINTEL CONFIG_NICINTEL_SPI)
$(call mark_unsupported,CONFIG_NICINTEL_EEPROM CONFIG_OGP_SPI CONFIG_IT8212)
endif

ifeq ($(TARGET_OS), $(filter $(TARGET_OS), Linux Darwin NetBSD OpenBSD))
FEATURE_CFLAGS += -D'USE_IOPL=1'
else
FEATURE_CFLAGS += -D'USE_IOPL=0'
endif

ifeq ($(TARGET_OS), $(filter $(TARGET_OS), FreeBSD FreeBSD-glibc DragonFlyBSD))
FEATURE_CFLAGS += -D'USE_DEV_IO=1'
else
FEATURE_CFLAGS += -D'USE_DEV_IO=0'
endif

ifeq ($(TARGET_OS), $(filter $(TARGET_OS), Hurd))
FEATURE_CFLAGS += -D'USE_IOPERM=1'
else
FEATURE_CFLAGS += -D'USE_IOPERM=0'
endif


###############################################################################
# Flash chip drivers and bus support infrastructure.

CHIP_OBJS = jedec.o stm50.o w39.o w29ee011.o \
	sst28sf040.o 82802ab.o \
	sst49lfxxxc.o sst_fwhub.o edi.o flashchips.o spi.o spi25.o spi25_statusreg.o \
	spi95.o opaque.o sfdp.o en29lv640b.o at45db.o \
	writeprotect.o writeprotect_ranges.o

###############################################################################
# Library code.

LIB_OBJS = libflashrom.o layout.o flashrom.o udelay.o programmer.o programmer_table.o helpers.o ich_descriptors.o fmap.o

###############################################################################
# Frontend related stuff.

CLI_OBJS = cli_classic.o cli_output.o cli_common.o print.o

# versioninfo.inc stores metadata required to build a packaged flashrom. It is generated by the export rule and
# imported below. If versioninfo.inc is not found and the variables are not defined by the user, the info will
# be obtained using util/getrevision.sh, which is the common case during development.
-include versioninfo.inc
VERSION ?= $(shell ./util/getrevision.sh --revision)
MAN_DATE ?= $(shell ./util/getrevision.sh --date $(PROGRAM).8.tmpl 2>/dev/null)

SCMDEF := -D'FLASHROM_VERSION="$(VERSION)"'

# Inform user of the version string
ifeq ($(filter branch tag,$(MAKECMDGOALS)), )
$(info Replacing all version templates with $(VERSION).)
endif

###############################################################################
# Default settings of CONFIG_* variables.

# Always enable internal/onboard support for now.
CONFIG_INTERNAL ?= yes

# Always enable serprog for now.
CONFIG_SERPROG ?= yes

# RayeR SPIPGM hardware support
CONFIG_RAYER_SPI ?= yes

# PonyProg2000 SPI hardware support
CONFIG_PONY_SPI ?= yes

# Always enable 3Com NICs for now.
CONFIG_NIC3COM ?= yes

# Enable NVIDIA graphics cards. Note: write and erase do not work properly.
CONFIG_GFXNVIDIA ?= yes

# Always enable SiI SATA controllers for now.
CONFIG_SATASII ?= yes

# Highpoint (HPT) ATA/RAID controller support.
# IMPORTANT: This code is not yet working!
CONFIG_ATAHPT ?= no

# VIA VT6421A LPC memory support
CONFIG_ATAVIA ?= yes

# Promise ATA controller support.
CONFIG_ATAPROMISE ?= no

# Always enable FT2232 SPI dongles for now.
CONFIG_FT2232_SPI ?= yes

# Always enable Altera USB-Blaster dongles for now.
CONFIG_USBBLASTER_SPI ?= yes

# MSTAR DDC support needs more tests/reviews/cleanups.
CONFIG_MSTARDDC_SPI ?= no

# Always enable PICkit2 SPI dongles for now.
CONFIG_PICKIT2_SPI ?= yes

# Always enable STLink V3
CONFIG_STLINKV3_SPI ?= yes

# Always enable dummy tracing for now.
CONFIG_DUMMY ?= yes

# Always enable Dr. Kaiser for now.
CONFIG_DRKAISER ?= yes

# Always enable Realtek NICs for now.
CONFIG_NICREALTEK ?= yes

# Disable National Semiconductor NICs until support is complete and tested.
CONFIG_NICNATSEMI ?= no

# Always enable Intel NICs for now.
CONFIG_NICINTEL ?= yes

# Always enable SPI on Intel NICs for now.
CONFIG_NICINTEL_SPI ?= yes

# Always enable EEPROM on Intel NICs for now.
CONFIG_NICINTEL_EEPROM ?= yes

# Always enable SPI on OGP cards for now.
CONFIG_OGP_SPI ?= yes

# Always enable Bus Pirate SPI for now.
CONFIG_BUSPIRATE_SPI ?= yes

# Always enable Dediprog SF100 for now.
CONFIG_DEDIPROG ?= yes

# Always enable Developerbox emergency recovery for now.
CONFIG_DEVELOPERBOX_SPI ?= yes

# Always enable Marvell SATA controllers for now.
CONFIG_SATAMV ?= yes

# Enable Linux spidev and MTD interfaces by default. We disable them on non-Linux targets.
CONFIG_LINUX_MTD ?= yes
CONFIG_LINUX_SPI ?= yes

# Always enable ITE IT8212F PATA controllers for now.
CONFIG_IT8212 ?= yes

# Winchiphead CH341A
CONFIG_CH341A_SPI ?= yes

# Digilent Development board JTAG
CONFIG_DIGILENT_SPI ?= yes

# DirtyJTAG
CONFIG_DIRTYJTAG_SPI ?= yes

# Disable J-Link for now.
CONFIG_JLINK_SPI ?= no

# National Instruments USB-845x is Windows only and needs a proprietary library.
CONFIG_NI845X_SPI ?= no

# Disable wiki printing by default. It is only useful if you have wiki access.
CONFIG_PRINT_WIKI ?= no

# Disable all features if CONFIG_NOTHING=yes is given unless CONFIG_EVERYTHING was also set
ifeq ($(CONFIG_NOTHING), yes)
  ifeq ($(CONFIG_EVERYTHING), yes)
    $(error Setting CONFIG_NOTHING=yes and CONFIG_EVERYTHING=yes does not make sense)
  endif
  $(foreach var, $(filter CONFIG_%, $(.VARIABLES)),\
    $(if $(filter yes, $($(var))),\
      $(eval $(var)=no)))
endif

# Enable all features if CONFIG_EVERYTHING=yes is given
ifeq ($(CONFIG_EVERYTHING), yes)
$(foreach var, $(filter CONFIG_%, $(.VARIABLES)),\
	$(if $(filter no, $($(var))),\
		$(eval $(var)=yes)))
endif

# Bitbanging SPI infrastructure, default off unless needed.

ifneq ($(call filter_deps,$(DEPENDS_ON_BITBANG_SPI)), )
override CONFIG_BITBANG_SPI = yes
else
CONFIG_BITBANG_SPI ?= no
endif

###############################################################################
# Handle CONFIG_* variables that depend on others set (and verified) above.

# The external DMI decoder (dmidecode) does not work in libpayload. Bail out if the internal one got disabled.
ifeq ($(TARGET_OS), libpayload)
ifeq ($(CONFIG_INTERNAL), yes)
ifeq ($(CONFIG_INTERNAL_DMI), no)
UNSUPPORTED_FEATURES += CONFIG_INTERNAL_DMI=no
else
override CONFIG_INTERNAL_DMI = yes
endif
endif
endif

# Use internal DMI/SMBIOS decoder by default instead of relying on dmidecode.
CONFIG_INTERNAL_DMI ?= yes

###############################################################################
# Programmer drivers and programmer support infrastructure.
# Depending on the CONFIG_* variables set and verified above we set compiler flags and parameters below.

ifdef CONFIG_DEFAULT_PROGRAMMER_NAME
FEATURE_CFLAGS += -D'CONFIG_DEFAULT_PROGRAMMER_NAME=&programmer_$(CONFIG_DEFAULT_PROGRAMMER_NAME)'
else
FEATURE_CFLAGS += -D'CONFIG_DEFAULT_PROGRAMMER_NAME=NULL'
endif

FEATURE_CFLAGS += -D'CONFIG_DEFAULT_PROGRAMMER_ARGS="$(CONFIG_DEFAULT_PROGRAMMER_ARGS)"'

ifeq ($(CONFIG_INTERNAL), yes)
FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1'
PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o internal.o
ifeq ($(ARCH), x86)
PROGRAMMER_OBJS += it87spi.o sb600spi.o amd_imc.o wbsio_spi.o mcp6x_spi.o
PROGRAMMER_OBJS += ichspi.o dmi.o
ifeq ($(CONFIG_INTERNAL_DMI), yes)
FEATURE_CFLAGS += -D'CONFIG_INTERNAL_DMI=1'
endif
else
endif
endif

ifeq ($(CONFIG_SERPROG), yes)
FEATURE_CFLAGS += -D'CONFIG_SERPROG=1'
PROGRAMMER_OBJS += serprog.o
NEED_SERIAL += CONFIG_SERPROG
NEED_POSIX_SOCKETS += CONFIG_SERPROG
endif

ifeq ($(CONFIG_RAYER_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_RAYER_SPI=1'
PROGRAMMER_OBJS += rayer_spi.o
NEED_RAW_ACCESS += CONFIG_RAYER_SPI
endif

ifeq ($(CONFIG_PONY_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_PONY_SPI=1'
PROGRAMMER_OBJS += pony_spi.o
NEED_SERIAL += CONFIG_PONY_SPI
endif

ifeq ($(CONFIG_BITBANG_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_BITBANG_SPI=1'
PROGRAMMER_OBJS += bitbang_spi.o
endif

ifeq ($(CONFIG_NIC3COM), yes)
FEATURE_CFLAGS += -D'CONFIG_NIC3COM=1'
PROGRAMMER_OBJS += nic3com.o
endif

ifeq ($(CONFIG_GFXNVIDIA), yes)
FEATURE_CFLAGS += -D'CONFIG_GFXNVIDIA=1'
PROGRAMMER_OBJS += gfxnvidia.o
endif

ifeq ($(CONFIG_SATASII), yes)
FEATURE_CFLAGS += -D'CONFIG_SATASII=1'
PROGRAMMER_OBJS += satasii.o
endif

ifeq ($(CONFIG_ATAHPT), yes)
FEATURE_CFLAGS += -D'CONFIG_ATAHPT=1'
PROGRAMMER_OBJS += atahpt.o
endif

ifeq ($(CONFIG_ATAVIA), yes)
FEATURE_CFLAGS += -D'CONFIG_ATAVIA=1'
PROGRAMMER_OBJS += atavia.o
endif

ifeq ($(CONFIG_ATAPROMISE), yes)
FEATURE_CFLAGS += -D'CONFIG_ATAPROMISE=1'
PROGRAMMER_OBJS += atapromise.o
endif

ifeq ($(CONFIG_IT8212), yes)
FEATURE_CFLAGS += -D'CONFIG_IT8212=1'
PROGRAMMER_OBJS += it8212.o
endif

ifeq ($(CONFIG_FT2232_SPI), yes)
# This is a totally ugly hack.
FEATURE_CFLAGS += $(call debug_shell,grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_FT2232_SPI=1'")
PROGRAMMER_OBJS += ft2232_spi.o
endif

ifeq ($(CONFIG_USBBLASTER_SPI), yes)
# This is a totally ugly hack.
FEATURE_CFLAGS += $(call debug_shell,grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_USBBLASTER_SPI=1'")
PROGRAMMER_OBJS += usbblaster_spi.o
endif

ifeq ($(CONFIG_PICKIT2_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_PICKIT2_SPI=1'
PROGRAMMER_OBJS += pickit2_spi.o
endif

ifeq ($(CONFIG_STLINKV3_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_STLINKV3_SPI=1'
PROGRAMMER_OBJS += stlinkv3_spi.o
endif

ifeq ($(CONFIG_DUMMY), yes)
FEATURE_CFLAGS += -D'CONFIG_DUMMY=1'
PROGRAMMER_OBJS += dummyflasher.o
endif

ifeq ($(CONFIG_DRKAISER), yes)
FEATURE_CFLAGS += -D'CONFIG_DRKAISER=1'
PROGRAMMER_OBJS += drkaiser.o
endif

ifeq ($(CONFIG_NICREALTEK), yes)
FEATURE_CFLAGS += -D'CONFIG_NICREALTEK=1'
PROGRAMMER_OBJS += nicrealtek.o
endif

ifeq ($(CONFIG_NICNATSEMI), yes)
FEATURE_CFLAGS += -D'CONFIG_NICNATSEMI=1'
PROGRAMMER_OBJS += nicnatsemi.o
endif

ifeq ($(CONFIG_NICINTEL), yes)
FEATURE_CFLAGS += -D'CONFIG_NICINTEL=1'
PROGRAMMER_OBJS += nicintel.o
endif

ifeq ($(CONFIG_NICINTEL_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_NICINTEL_SPI=1'
PROGRAMMER_OBJS += nicintel_spi.o
endif

ifeq ($(CONFIG_NICINTEL_EEPROM), yes)
FEATURE_CFLAGS += -D'CONFIG_NICINTEL_EEPROM=1'
PROGRAMMER_OBJS += nicintel_eeprom.o
endif

ifeq ($(CONFIG_OGP_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_OGP_SPI=1'
PROGRAMMER_OBJS += ogp_spi.o
endif

ifeq ($(CONFIG_BUSPIRATE_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_BUSPIRATE_SPI=1'
PROGRAMMER_OBJS += buspirate_spi.o
NEED_SERIAL += CONFIG_BUSPIRATE_SPI
endif

ifeq ($(CONFIG_DEDIPROG), yes)
FEATURE_CFLAGS += -D'CONFIG_DEDIPROG=1'
PROGRAMMER_OBJS += dediprog.o
endif

ifeq ($(CONFIG_DEVELOPERBOX_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_DEVELOPERBOX_SPI=1'
PROGRAMMER_OBJS += developerbox_spi.o
endif

ifeq ($(CONFIG_SATAMV), yes)
FEATURE_CFLAGS += -D'CONFIG_SATAMV=1'
PROGRAMMER_OBJS += satamv.o
endif

ifeq ($(CONFIG_LINUX_MTD), yes)
# This is a totally ugly hack.
FEATURE_CFLAGS += $(call debug_shell,grep -q "LINUX_MTD_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_LINUX_MTD=1'")
PROGRAMMER_OBJS += linux_mtd.o
endif

ifeq ($(CONFIG_LINUX_SPI), yes)
# This is a totally ugly hack.
FEATURE_CFLAGS += $(call debug_shell,grep -q "LINUX_SPI_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_LINUX_SPI=1'")
PROGRAMMER_OBJS += linux_spi.o
endif

ifeq ($(CONFIG_MSTARDDC_SPI), yes)
# This is a totally ugly hack.
FEATURE_CFLAGS += $(call debug_shell,grep -q "LINUX_I2C_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_MSTARDDC_SPI=1'")
NEED_LINUX_I2C += CONFIG_MSTARDDC_SPI
PROGRAMMER_OBJS += mstarddc_spi.o
endif

ifeq ($(CONFIG_CH341A_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_CH341A_SPI=1'
PROGRAMMER_OBJS += ch341a_spi.o
endif

ifeq ($(CONFIG_DIGILENT_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_DIGILENT_SPI=1'
PROGRAMMER_OBJS += digilent_spi.o
endif

ifeq ($(CONFIG_DIRTYJTAG_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_DIRTYJTAG_SPI=1'
PROGRAMMER_OBJS += dirtyjtag_spi.o
endif

ifeq ($(CONFIG_JLINK_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_JLINK_SPI=1'
PROGRAMMER_OBJS += jlink_spi.o
endif

ifeq ($(CONFIG_NI845X_SPI), yes)
FEATURE_CFLAGS += -D'CONFIG_NI845X_SPI=1'

ifeq ($(CONFIG_NI845X_LIBRARY_PATH),)
# if the user did not specified the NI-845x headers/lib path
# do a guess for both 32 and 64 bit Windows versions
NI845X_LIBS += -L'${PROGRAMFILES}\National Instruments\NI-845x\MS Visual C'
NI845X_INCLUDES += -I'${PROGRAMFILES}\National Instruments\NI-845x\MS Visual C'

# hack to access env variable containing brackets...
PROGRAMFILES_X86DIR = $(shell env | sed -n "s/^PROGRAMFILES(X86)=//p")

ifneq ($(PROGRAMFILES_X86DIR),)
ifneq ($(PROGRAMFILES_X86DIR), ${PROGRAMFILES})
NI845X_LIBS += -L'$(PROGRAMFILES_X86DIR)\National Instruments\NI-845x\MS Visual C'
NI845X_INCLUDES += -I'$(PROGRAMFILES_X86DIR)\National Instruments\NI-845x\MS Visual C'
endif
endif

else
NI845X_LIBS += -L'$(CONFIG_NI845X_LIBRARY_PATH)'
NI845X_INCLUDES += -I'$(CONFIG_NI845X_LIBRARY_PATH)'
endif

FEATURE_CFLAGS += $(NI845X_INCLUDES)
LIBS += -lni845x
PROGRAMMER_OBJS += ni845x_spi.o
endif

ifneq ($(NEED_SERIAL), )
LIB_OBJS += serial.o
ifeq ($(TARGET_OS), Linux)
LIB_OBJS += custom_baud_linux.o
else
LIB_OBJS += custom_baud.o
endif
endif

ifneq ($(NEED_POSIX_SOCKETS), )
ifeq ($(TARGET_OS), SunOS)
LIBS += -lsocket -lnsl
endif
endif

NEED_LIBPCI := $(call filter_deps,$(DEPENDS_ON_LIBPCI))
ifneq ($(NEED_LIBPCI), )
CHECK_LIBPCI = yes
# This is a dirty hack, but it saves us from checking all PCI drivers and all platforms manually.
# libpci may need raw memory, MSR or PCI port I/O on some platforms.
# Individual drivers might have the same needs as well.
NEED_RAW_ACCESS += $(NEED_LIBPCI)
FEATURE_CFLAGS += -D'NEED_PCI=1'
FEATURE_CFLAGS += $(call debug_shell,grep -q "OLD_PCI_GET_DEV := yes" .libdeps && printf "%s" "-D'OLD_PCI_GET_DEV=1'")

PROGRAMMER_OBJS += pcidev.o
ifeq ($(TARGET_OS), NetBSD)
# The libpci we want is called libpciutils on NetBSD and needs NetBSD libpci.
PCILIBS += -lpciutils -lpci
else
PCILIBS += -lpci
endif
endif

ifneq ($(NEED_RAW_ACCESS), )
# Raw memory, MSR or PCI port I/O access.
FEATURE_CFLAGS += -D'NEED_RAW_ACCESS=1'
PROGRAMMER_OBJS += physmap.o hwaccess.o

ifeq ($(TARGET_OS), NetBSD)
ifeq ($(ARCH), x86)
PCILIBS += -l$(shell uname -p)
endif
else
ifeq ($(TARGET_OS), OpenBSD)
ifeq ($(ARCH), x86)
PCILIBS += -l$(shell uname -m)
endif
else
ifeq ($(TARGET_OS), Darwin)
# DirectHW framework can be found in the DirectHW library.
PCILIBS += -framework IOKit -framework DirectHW
endif
endif
endif

endif

NEED_LIBUSB1 := $(call filter_deps,$(DEPENDS_ON_LIBUSB1))
ifneq ($(NEED_LIBUSB1), )
CHECK_LIBUSB1 = yes
PROGRAMMER_OBJS += usbdev.o
# FreeBSD and DragonflyBSD use a reimplementation of libusb-1.0 that is simply called libusb
ifeq ($(TARGET_OS),$(filter $(TARGET_OS),FreeBSD DragonFlyBSD))
USB1LIBS += -lusb
else
ifeq ($(TARGET_OS),NetBSD)
override CPPFLAGS += -I/usr/pkg/include/libusb-1.0
USB1LIBS += -lusb-1.0
else
USB1LIBS += $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)"; $(PKG_CONFIG) --libs libusb-1.0  || printf "%s" "-lusb-1.0")
override CPPFLAGS += $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)"; $(PKG_CONFIG) --cflags-only-I libusb-1.0  || printf "%s" "-I/usr/include/libusb-1.0")
endif
endif
endif

NEED_LIBFTDI := $(call filter_deps,$(DEPENDS_ON_LIBFTDI))
ifneq ($(NEED_LIBFTDI), )
FTDILIBS := $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; $(PKG_CONFIG) --libs libftdi1 || $(PKG_CONFIG) --libs libftdi || printf "%s" "-lftdi -lusb")
FEATURE_CFLAGS += $(call debug_shell,grep -q "FT232H := yes" .features && printf "%s" "-D'HAVE_FT232H=1'")
FTDI_INCLUDES := $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; $(PKG_CONFIG) --cflags-only-I libftdi1)
FEATURE_CFLAGS += $(FTDI_INCLUDES)
FEATURE_LIBS += $(call debug_shell,grep -q "FTDISUPPORT := yes" .features && printf "%s" "$(FTDILIBS)")
# We can't set NEED_LIBUSB1 here because that would transform libftdi auto-enabling
# into a hard requirement for libusb, defeating the purpose of auto-enabling.
endif

NEED_LIBJAYLINK := $(call filter_deps,$(DEPENDS_ON_LIBJAYLINK))
ifneq ($(NEED_LIBJAYLINK), )
CHECK_LIBJAYLINK = yes
JAYLINKLIBS += $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)"; $(PKG_CONFIG) --libs libjaylink)
override CPPFLAGS += $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)"; $(PKG_CONFIG) --cflags-only-I libjaylink)
endif

ifeq ($(CONFIG_PRINT_WIKI), yes)
FEATURE_CFLAGS += -D'CONFIG_PRINT_WIKI=1'
CLI_OBJS += print_wiki.o
endif

FEATURE_CFLAGS += $(call debug_shell,grep -q "UTSNAME := yes" .features && printf "%s" "-D'HAVE_UTSNAME=1'")

# We could use PULLED_IN_LIBS, but that would be ugly.
FEATURE_LIBS += $(call debug_shell,grep -q "NEEDLIBZ := yes" .libdeps && printf "%s" "-lz")

FEATURE_CFLAGS += $(call debug_shell,grep -q "CLOCK_GETTIME := yes" .features && printf "%s" "-D'HAVE_CLOCK_GETTIME=1'")
FEATURE_LIBS += $(call debug_shell,grep -q "CLOCK_GETTIME := yes" .features && printf "%s" "-lrt")

LIBFLASHROM_OBJS = $(CHIP_OBJS) $(PROGRAMMER_OBJS) $(LIB_OBJS)
OBJS = $(CLI_OBJS) $(LIBFLASHROM_OBJS)

all: hwlibs features $(PROGRAM)$(EXEC_SUFFIX) $(PROGRAM).8
ifeq ($(ARCH), x86)
	@+$(MAKE) -C util/ich_descriptors_tool/ TARGET_OS=$(TARGET_OS) EXEC_SUFFIX=$(EXEC_SUFFIX)
endif

$(PROGRAM)$(EXEC_SUFFIX): $(OBJS)
	$(CC) $(LDFLAGS) -o $(PROGRAM)$(EXEC_SUFFIX) $(OBJS) $(LIBS) $(PCILIBS) $(FEATURE_LIBS) $(USBLIBS) $(USB1LIBS) $(JAYLINKLIBS) $(NI845X_LIBS)

libflashrom.a: $(LIBFLASHROM_OBJS)
	$(AR) rcs $@ $^
	$(RANLIB) $@

# TAROPTIONS reduces information leakage from the packager's system.
# If other tar programs support command line arguments for setting uid/gid of
# stored files, they can be handled here as well.
TAROPTIONS = $(shell LC_ALL=C tar --version|grep -q GNU && echo "--owner=root --group=root")

%.o: %.c .features
	$(CC) -MMD $(CFLAGS) $(CPPFLAGS) $(FLASHROM_CFLAGS) $(FEATURE_CFLAGS) $(SCMDEF) -o $@ -c $<

# Make sure to add all names of generated binaries here.
# This includes all frontends and libflashrom.
# We don't use EXEC_SUFFIX here because we want to clean everything.
clean:
	rm -f $(PROGRAM) $(PROGRAM).exe libflashrom.a $(filter-out Makefile.d, $(wildcard *.d *.o)) $(PROGRAM).8 $(PROGRAM).8.html $(BUILD_DETAILS_FILE)
	@+$(MAKE) -C util/ich_descriptors_tool/ clean

distclean: clean
	rm -f .features .libdeps

strip: $(PROGRAM)$(EXEC_SUFFIX)
	$(STRIP) $(STRIP_ARGS) $(PROGRAM)$(EXEC_SUFFIX)

# to define test programs we use verbatim variables, which get exported
# to environment variables and are referenced with $$<varname> later

compiler: featuresavailable
	@printf "Checking for a C compiler... " | tee -a $(BUILD_DETAILS_FILE)
	@echo "$$COMPILER_TEST" > .test.c
	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test.c -o .test$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
	@{ { { { { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test.c -o .test$(EXEC_SUFFIX) >&2 && \
		echo "found." || { echo "not found."; \
		rm -f .test.c .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
	@rm -f .test.c .test$(EXEC_SUFFIX)
	@echo Target arch is $(ARCH)
	@if [ $(ARCH) = unknown ]; then echo Aborting.; exit 1; fi
	@echo Target OS is $(TARGET_OS)
	@if [ $(TARGET_OS) = unknown ]; then echo Aborting.; exit 1; fi
	@echo Target endian is $(ENDIAN)
	@if [ $(ENDIAN) = unknown ]; then echo Aborting.; exit 1; fi
ifeq ($(TARGET_OS), libpayload)
	@$(CC) --version 2>&1 | grep -q coreboot || \
		( echo "Warning: It seems you are not using coreboot's reference compiler."; \
		  echo "This might work but usually does not, please beware." )
endif

hwlibs: compiler
	@printf "" > .libdeps
ifeq ($(CHECK_LIBPCI), yes)
	@printf "Checking for libpci headers... " | tee -a $(BUILD_DETAILS_FILE)
	@echo "$$LIBPCI_TEST" > .test.c
	@printf "\nexec: %s\n" "$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o" >>$(BUILD_DETAILS_FILE)
	@{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \
		echo "found." || { echo "not found."; echo;			\
		echo "The following features require libpci: $(NEED_LIBPCI).";	\
		echo "Please install libpci headers or disable all features"; \
		echo "mentioned above by specifying make CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no"; \
		echo "See README for more information."; echo;			\
		rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
	@printf "Checking version of pci_get_dev... " | tee -a $(BUILD_DETAILS_FILE)
	@echo "$$PCI_GET_DEV_TEST" > .test.c
	@printf "\nexec: %s\n" "$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o" >>$(BUILD_DETAILS_FILE)
	@ { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \
		( echo "new version (including PCI domain parameter)."; echo "OLD_PCI_GET_DEV := no" >> .libdeps ) ||	\
		( echo "old version (without PCI domain parameter)."; echo "OLD_PCI_GET_DEV := yes" >> .libdeps ) } 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
	@printf "Checking if libpci is present and sufficient... " | tee -a $(BUILD_DETAILS_FILE)
	@printf "\nexec: %s\n" "$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS)" >>$(BUILD_DETAILS_FILE)
	@{ { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) 2>>$(BUILD_DETAILS_FILE) >&2 && \
		echo "yes." || { echo "no.";							\
		printf "Checking if libz+libpci are present and sufficient..." ; \
		{ printf "\nexec: %s\n" "$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) -lz" >>$(BUILD_DETAILS_FILE) ; \
		$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) -lz >&2 && \
		echo "yes." && echo "NEEDLIBZ := yes" > .libdeps } || { echo "no."; echo;	\
		echo "The following features require libpci: $(NEED_LIBPCI).";			\
		echo "Please install libpci (package pciutils) and/or libz or disable all features"; \
		echo "mentioned above by specifying make CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no"; \
		echo "See README for more information."; echo;				\
		rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
	@rm -f .test.c .test.o .test$(EXEC_SUFFIX)
endif
ifeq ($(CHECK_LIBUSB1), yes)
	@printf "Checking for libusb-1.0 headers... " | tee -a $(BUILD_DETAILS_FILE)
	@echo "$$LIBUSB1_TEST" > .test.c
	@printf "\nexec: %s\n" "$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o" >>$(BUILD_DETAILS_FILE)
	@{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \
		echo "found." || { echo "not found."; echo;				\
		echo "The following features require libusb-1.0: $(NEED_LIBUSB1).";	\
		echo "Please install libusb-1.0 headers or disable all features"; \
		echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no"; \
		echo "See README for more information."; echo;				\
		rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
	@printf "Checking if libusb-1.0 is usable... " | tee -a $(BUILD_DETAILS_FILE)
	@printf "\nexec: %s\n" "$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USB1LIBS)" >>$(BUILD_DETAILS_FILE)
	@{ { { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USB1LIBS) >&2 && \
		echo "yes." || { echo "no.";						\
		echo "The following features require libusb-1.0: $(NEED_LIBUSB1).";	\
		echo "Please install libusb-1.0 or disable all features"; \
		echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no"; \
		echo "See README for more information."; echo;				\
		rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
	@rm -f .test.c .test.o .test$(EXEC_SUFFIX)
endif
ifeq ($(CHECK_LIBJAYLINK), yes)
	@printf "Checking for libjaylink headers... " | tee -a $(BUILD_DETAILS_FILE)
	@echo "$$LIBJAYLINK_TEST" > .test.c
	@printf "\nexec: %s\n" "$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o" >>$(BUILD_DETAILS_FILE)
	@{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \
		echo "found." || { echo "not found."; echo;				\
		echo "The following feature requires libjaylink: $(NEED_LIBJAYLINK).";	\
		echo "Please install libjaylink headers or disable the feature"; \
		echo "mentioned above by specifying make CONFIG_JLINK_SPI=no"; \
		echo "See README for more information."; echo;				\
		rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
	@printf "Checking if libjaylink is usable... " | tee -a $(BUILD_DETAILS_FILE)
	@printf "\nexec: %s\n" "$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(JAYLINKLIBS)" >>$(BUILD_DETAILS_FILE)
	@{ { { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(JAYLINKLIBS) >&2 && \
		echo "yes." || { echo "no.";						\
		echo "The following feature requires libjaylink: $(NEED_LIBJAYLINK).";	\
		echo "Please install libjaylink or disable the feature"; \
		echo "mentioned above by specifying make CONFIG_JLINK_SPI=no"; \
		echo "See README for more information."; echo;				\
		rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
	@rm -f .test.c .test.o .test$(EXEC_SUFFIX)
endif

.features: features

# If a user does not explicitly request a non-working feature, we should
# silently disable it. However, if a non-working (does not compile) feature
# is explicitly requested, we should bail out with a descriptive error message.
# We also have to check that at least one programmer driver is enabled.
featuresavailable:
ifeq ($(PROGRAMMER_OBJS),)
	@echo "You have to enable at least one programmer driver!"
	@false
endif
ifneq ($(UNSUPPORTED_FEATURES), )
	@echo "The following features are unavailable on your machine: $(UNSUPPORTED_FEATURES)"
	@false
endif

features: compiler
	@echo "FEATURES := yes" > .features.tmp
ifneq ($(NEED_LIBFTDI), )
	@printf "Checking for FTDI support... " | tee -a $(BUILD_DETAILS_FILE)
	@echo "$$FTDI_TEST" > .featuretest.c
	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS)" >>$(BUILD_DETAILS_FILE)
	@ { $(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >&2 && \
	(	echo "found."; echo "FTDISUPPORT := yes" >> .features.tmp ; \
		printf "Checking for FT232H support in libftdi... " ; \
		echo "$$FTDI_232H_TEST" >> .featuretest.c ; \
		printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS)" >>$(BUILD_DETAILS_FILE) ; \
		{ $(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >&2 && \
			( echo "found."; echo "FT232H := yes" >> .features.tmp ) ||	\
			( echo "not found."; echo "FT232H := no" >> .features.tmp ) } \
	) || \
	( echo "not found."; echo "FTDISUPPORT := no" >> .features.tmp ) } \
	2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
endif
ifeq ($(CONFIG_LINUX_MTD), yes)
	@printf "Checking if Linux MTD headers are present... " | tee -a $(BUILD_DETAILS_FILE)
	@echo "$$LINUX_MTD_TEST" > .featuretest.c
	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
	@ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
		( echo "yes."; echo "LINUX_MTD_SUPPORT := yes" >> .features.tmp ) ||	\
		( echo "no."; echo "LINUX_MTD_SUPPORT := no" >> .features.tmp ) } \
		2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
endif
ifeq ($(CONFIG_LINUX_SPI), yes)
	@printf "Checking if Linux SPI headers are present... " | tee -a $(BUILD_DETAILS_FILE)
	@echo "$$LINUX_SPI_TEST" > .featuretest.c
	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
	@ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
		( echo "yes."; echo "LINUX_SPI_SUPPORT := yes" >> .features.tmp ) ||	\
		( echo "no."; echo "LINUX_SPI_SUPPORT := no" >> .features.tmp ) } \
		2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
endif
ifneq ($(NEED_LINUX_I2C), )
	@printf "Checking if Linux I2C headers are present... " | tee -a $(BUILD_DETAILS_FILE)
	@echo "$$LINUX_I2C_TEST" > .featuretest.c
	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
	@ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
		( echo "yes."; echo "LINUX_I2C_SUPPORT := yes" >> .features.tmp ) ||	\
		( echo "no."; echo "LINUX_I2C_SUPPORT := no" >> .features.tmp ) } \
		2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
endif
ifeq ($(CONFIG_NI845X_SPI), yes)
	@printf "Checking for NI USB-845x installation... " | tee -a $(BUILD_DETAILS_FILE)
	@echo "$$NI845X_TEST" > .featuretest.c
	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(NI845X_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(NI845X_LIBS) $(LIBS)" >>$(BUILD_DETAILS_FILE)

	@ { { { { { $(CC) $(CPPFLAGS) $(CFLAGS) $(NI845X_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(NI845X_LIBS) $(LIBS) >&2 && \
		( echo "yes."; echo "NI845X_SUPPORT := yes" >> .features.tmp ) ||	\
		{   echo -e "\nUnable to find NI-845x headers or libraries."; \
			echo "Please pass the NI-845x library path to the make with the CONFIG_NI845X_LIBRARY_PATH parameter,"; \
			echo "or disable the NI-845x support by specifying make CONFIG_NI845X_SPI=no"; \
			echo "For the NI-845x 17.0 the library path is:"; \
			echo " On 32 bit systems: C:\Program Files)\National Instruments\NI-845x\MS Visual C"; \
			echo " On 64 bit systems: C:\Program Files (x86)\National Instruments\NI-845x\MS Visual C"; \
			exit 1; }; } \
		2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
endif
	@printf "Checking for utsname support... " | tee -a $(BUILD_DETAILS_FILE)
	@echo "$$UTSNAME_TEST" > .featuretest.c
	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
	@ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
		( echo "found."; echo "UTSNAME := yes" >> .features.tmp ) ||	\
		( echo "not found."; echo "UTSNAME := no" >> .features.tmp ) } 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
	@printf "Checking for clock_gettime support... " | tee -a $(BUILD_DETAILS_FILE)
ifeq ($(DISABLE_CLOCK_GETTIME), yes)
	@ { ( echo "disabled."; echo "CLOCK_GETTIME := no" >>.features.tmp ) } \
		2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
else
	@echo "$$CLOCK_GETTIME_TEST" >.featuretest.c
	@printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -lrt .featuretest.c -o .featuretest$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
	@ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -lrt .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
		( echo "found."; echo "CLOCK_GETTIME := yes" >>.features.tmp ) || \
		( echo "not found."; echo "CLOCK_GETTIME := no" >>.features.tmp ) } \
		2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
endif
	@$(DIFF) -q .features.tmp .features >/dev/null 2>&1 && rm .features.tmp || mv .features.tmp .features
	@rm -f .featuretest.c .featuretest$(EXEC_SUFFIX)

$(PROGRAM).8.html: $(PROGRAM).8
	@groff -mandoc -Thtml $< >$@

$(PROGRAM).8: $(PROGRAM).8.tmpl
	@# Add the man page change date and version to the man page
	@sed -e 's#.TH FLASHROM 8 .*#.TH FLASHROM 8 "$(MAN_DATE)" "flashrom-stable-$(VERSION)" "$(MAN_DATE)"#' <$< >$@

install: $(PROGRAM)$(EXEC_SUFFIX) $(PROGRAM).8
	mkdir -p $(DESTDIR)$(PREFIX)/sbin
	mkdir -p $(DESTDIR)$(MANDIR)/man8
	$(INSTALL) -m 0755 $(PROGRAM)$(EXEC_SUFFIX) $(DESTDIR)$(PREFIX)/sbin
	$(INSTALL) -m 0644 $(PROGRAM).8 $(DESTDIR)$(MANDIR)/man8

libinstall: libflashrom.a libflashrom.h
	mkdir -p $(DESTDIR)$(PREFIX)/lib
	$(INSTALL) -m 0644 libflashrom.a $(DESTDIR)$(PREFIX)/lib
	mkdir -p $(DESTDIR)$(PREFIX)/include
	$(INSTALL) -m 0644 libflashrom.h $(DESTDIR)$(PREFIX)/include

versioninfo:
#	Generate versioninfo.inc containing metadata that would not be available in exported sources otherwise.
	@[ "$(RELEASE)" ] || { echo 'Error: Must provide `RELEASE=...`'; exit 1; }
	@echo "VERSION = $(RELEASE)" > $@.inc
	@echo "MAN_DATE = $(shell ./util/getrevision.sh --date $(PROGRAM).8.tmpl 2>/dev/null)" >> $@.inc

branch: versioninfo
	@git checkout -b $(RELEASE)
	@git add -f $<.inc
	@git commit -sm'Update version info for $(RELEASE)'

tag: versioninfo
	@git add -f $<.inc
	@git commit -sm'Update version info for $(RELEASE)'
	@git tag -s $(RELEASE)

# No spaces in release names unless set explicitly
RELEASENAME ?= flashrom-stable-$(shell echo "$(VERSION)" | sed -e 's/ /_/')

_export: EXPORT_VERSIONINFO := $(EXPORTDIR)/$(RELEASENAME)/versioninfo.inc
_export: $(PROGRAM).8
	@rm -rf "$(EXPORTDIR)/$(RELEASENAME)"
	@mkdir -p "$(EXPORTDIR)/$(RELEASENAME)"
	@git archive HEAD | tar -x -C "$(EXPORTDIR)/$(RELEASENAME)"
#	Generate fresh versioninfo.inc and compare
	@echo "VERSION = $(shell ./util/getrevision.sh --revision)" > "$(EXPORT_VERSIONINFO)"
	@echo "MAN_DATE = $(shell ./util/getrevision.sh --date $(PROGRAM).8.tmpl 2>/dev/null)" >> \
		"$(EXPORT_VERSIONINFO)"
	@if [ -f versioninfo.inc ]; then				\
		cmp -s versioninfo.inc "$(EXPORT_VERSIONINFO)" ||	\
		{ echo Error: Version info changed:;			\
		  cat "$(EXPORT_VERSIONINFO)";				\
		  echo Update versioninfo.inc and tag accordingly.;	\
		  exit 1;						\
		};							\
	fi
#	Restore modification date of all tracked files not marked 'export-ignore' in .gitattributes.
#	sed is required to filter out file names having the attribute set.
#	The sed program saves the file name in the hold buffer and then checks if the respective value is 'set'.
#	If so it ignores the rest of the program, which otherwise restores the file name and prints it.
	@git ls-tree -r -z -t --full-name --name-only HEAD | \
		git check-attr -z --stdin export-ignore | \
		sed -zne 'x;n;n;{/^set$$/b;};x;p;' | \
		xargs -0 sh -c 'for f; do \
			touch -d $$(git log --pretty=format:%cI -1 HEAD -- "$$f") \
				"$(EXPORTDIR)/$(RELEASENAME)/$$f"; \
		done' dummy_arg0

export: _export
	@echo "Exported $(EXPORTDIR)/$(RELEASENAME)/"

tarball: _export
	@tar -cj --format=ustar -f "$(EXPORTDIR)/$(RELEASENAME).tar.bz2" -C $(EXPORTDIR)/ \
		$(TAROPTIONS) "$(RELEASENAME)/"
#	Delete the exported directory again because it is most likely what's expected by the user.
	@rm -rf "$(EXPORTDIR)/$(RELEASENAME)"
	@echo Created "$(EXPORTDIR)/$(RELEASENAME).tar.bz2"

libpayload: clean
	make CC="CC=i386-elf-gcc lpgcc" AR=i386-elf-ar RANLIB=i386-elf-ranlib

gitconfig:
	./util/getrevision.sh -c 2>/dev/null && ./util/git-hooks/install.sh

.PHONY: all install clean distclean compiler hwlibs features branch tag versioninfo _export export tarball featuresavailable libpayload gitconfig

# Disable implicit suffixes and built-in rules (for performance and profit)
.SUFFIXES:

-include $(OBJS:.o=.d)