Add spi_block_erase_62
This is used by the AT25F series (only?), but is generic enough to
reside in spi25.c. The only currently supported chip is the AT25F512B.
Other members of that series need some additional infrastructure code,
hence this patch adds the erase function to the AT25F512B only.
Corresponding to flashrom svn r1600.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/chipdrivers.h b/chipdrivers.h
index b43e16e..b8af62a 100644
--- a/chipdrivers.h
+++ b/chipdrivers.h
@@ -40,6 +40,7 @@
int spi_block_erase_d7(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
int spi_block_erase_d8(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
int spi_block_erase_60(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
+int spi_block_erase_62(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
int spi_block_erase_c7(struct flashctx *flash, unsigned int addr, unsigned int blocklen);
erasefunc_t *spi_get_erasefn_from_opcode(uint8_t opcode);
int spi_chip_write_1(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len);
diff --git a/flashchips.c b/flashchips.c
index 1175333..c794afc 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -1695,6 +1695,9 @@
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
+ }, {
+ .eraseblocks = { {64 * 1024, 1} },
+ .block_erase = spi_block_erase_62,
}
},
.printlock = spi_prettyprint_status_register_at25f512b,
diff --git a/spi.h b/spi.h
index a57f1b6..ce2ede8 100644
--- a/spi.h
+++ b/spi.h
@@ -66,6 +66,11 @@
#define JEDEC_CE_60_OUTSIZE 0x01
#define JEDEC_CE_60_INSIZE 0x00
+/* Chip Erase 0x62 is supported by Atmel AT25F chips. */
+#define JEDEC_CE_62 0x62
+#define JEDEC_CE_62_OUTSIZE 0x01
+#define JEDEC_CE_62_INSIZE 0x00
+
/* Chip Erase 0xc7 is supported by SST/ST/EON/Macronix chips. */
#define JEDEC_CE_C7 0xc7
#define JEDEC_CE_C7_OUTSIZE 0x01
diff --git a/spi25.c b/spi25.c
index 914b821..58a5a79 100644
--- a/spi25.c
+++ b/spi25.c
@@ -487,6 +487,43 @@
return 0;
}
+int spi_chip_erase_62(struct flashctx *flash)
+{
+ int result;
+ struct spi_command cmds[] = {
+ {
+ .writecnt = JEDEC_WREN_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_WREN },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = JEDEC_CE_62_OUTSIZE,
+ .writearr = (const unsigned char[]){ JEDEC_CE_62 },
+ .readcnt = 0,
+ .readarr = NULL,
+ }, {
+ .writecnt = 0,
+ .writearr = NULL,
+ .readcnt = 0,
+ .readarr = NULL,
+ }};
+
+ result = spi_send_multicommand(flash, cmds);
+ if (result) {
+ msg_cerr("%s failed during command execution\n",
+ __func__);
+ return result;
+ }
+ /* Wait until the Write-In-Progress bit is cleared.
+ * This usually takes 2-5 s, so wait in 100 ms steps.
+ */
+ /* FIXME: We assume spi_read_status_register will never fail. */
+ while (spi_read_status_register(flash) & SPI_SR_WIP)
+ programmer_delay(100 * 1000);
+ /* FIXME: Check the status register for errors. */
+ return 0;
+}
+
int spi_chip_erase_c7(struct flashctx *flash)
{
int result;
@@ -711,6 +748,16 @@
return spi_chip_erase_60(flash);
}
+int spi_block_erase_62(struct flashctx *flash, unsigned int addr, unsigned int blocklen)
+{
+ if ((addr != 0) || (blocklen != flash->chip->total_size * 1024)) {
+ msg_cerr("%s called with incorrect arguments\n",
+ __func__);
+ return -1;
+ }
+ return spi_chip_erase_62(flash);
+}
+
int spi_block_erase_c7(struct flashctx *flash, unsigned int addr,
unsigned int blocklen)
{