flashchips: Add support for Macronix MX66L1G45G
Tested on Dediprog SF600: Reading and writing works.
Change-Id: I554e828c97d9ec77b08489573a34e176599d2518
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Original-Reviewed-on: https://review.coreboot.org/c/flashrom/+/55353
Original-Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/flashrom-stable/+/70958
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/flashchips.c b/flashchips.c
index 962b7cb..266f6b0 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -10036,6 +10036,55 @@
.voltage = {2700, 3600},
},
+ {
+ .vendor = "Macronix",
+ .name = "MX66L1G45G",
+ .bustype = BUS_SPI,
+ .manufacture_id = MACRONIX_ID,
+ .model_id = MACRONIX_MX66L1G45G,
+ .total_size = 131072,
+ .page_size = 256,
+ /* OTP: 512B total; enter 0xB1, exit 0xC1 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 32768} },
+ .block_erase = spi_block_erase_21,
+ }, {
+ .eraseblocks = { {4 * 1024, 32768} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 4096} },
+ .block_erase = spi_block_erase_5c,
+ }, {
+ .eraseblocks = { {32 * 1024, 4096} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 2048} },
+ .block_erase = spi_block_erase_dc,
+ }, {
+ .eraseblocks = { {64 * 1024, 2048} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {128 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {128 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ /* TODO: security register and SBLK/SBULK, configuration register */
+ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
+ .unlock = spi_disable_blockprotect_bp3_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .voltage = {2700, 3600},
+ },
+
/* The ST M25P05 is a bit of a problem. It has the same ID as the
* ST M25P05-A in RES mode, but supports only 128 byte writes instead
* of 256 byte writes. We rely heavily on the fact that probe_spi_res1