writeprotect_ranges.c: add more range functions
Not all chips follow the same pattern. There are differences in how CMP
bit is treated or in block size used.
Change-Id: Ied7b27be2ee2426af8f473432e2b01a290de2365
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Original-Reviewed-on: https://review.coreboot.org/c/flashrom/+/66212
Original-Reviewed-by: Nikolai Artemiev <nartemiev@google.com>
Original-Reviewed-by: Anastasia Klimchuk <aklm@chromium.org>
Reviewed-on: https://review.coreboot.org/c/flashrom-stable/+/71008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
diff --git a/writeprotect_ranges.c b/writeprotect_ranges.c
index 04e3881..d15ba5d 100644
--- a/writeprotect_ranges.c
+++ b/writeprotect_ranges.c
@@ -17,11 +17,11 @@
#include "writeprotect.h"
#include "chipdrivers.h"
-/*
- * Protection range calculation that works with many common SPI flash chips.
- */
-void decode_range_spi25(size_t *start, size_t *len, const struct wp_bits *bits, size_t chip_len)
+static void decode_range_generic(size_t *start, size_t *len, const struct wp_bits *bits, size_t chip_len,
+ bool fixed_block_len, bool apply_cmp_to_bp, int coeff_offset)
{
+ const bool cmp = bits->cmp_bit_present && bits->cmp == 1;
+
/* Interpret BP bits as an integer */
size_t i;
size_t bp = 0;
@@ -32,6 +32,15 @@
bp_max |= 1 << i;
}
+ /*
+ * Most chips: the CMP bit only negates the range.
+ *
+ * Some MX chips: the CMP bit negates the BP bits and the range.
+ * (CMP bit is often the MSB BP bit in such chips.)
+ */
+ if (cmp && apply_cmp_to_bp)
+ bp ^= bp_max;
+
if (bp == 0) {
/* Special case: all BP bits are 0 => no write protection */
*len = 0;
@@ -41,14 +50,14 @@
} else {
/*
* Usual case: the BP bits encode a coefficient in the form
- * `coeff = 2 ** (bp - 1)`.
+ * `coeff = 2 ** (bp - offset)` where `offset == 1`.
*
* The range's length is given by multiplying the coefficient
* by a base unit, usually a 4K sector or a 64K block.
*/
- size_t coeff = 1 << (bp - 1);
- size_t max_coeff = 1 << (bp_max - 2);
+ size_t coeff = 1 << (bp - coeff_offset);
+ size_t max_coeff = 1 << (bp_max - coeff_offset - 1);
size_t sector_len = 4 * KiB;
size_t default_block_len = 64 * KiB;
@@ -63,14 +72,19 @@
} else {
/*
* SEC=0 or is not present, protect blocks.
- *
+ */
+ size_t block_len = default_block_len;
+
+ /*
* With very large chips, the 'block' size can be
* larger than 64K. This occurs when a larger block
* size is needed so that half the chip can be
* protected by the maximum possible coefficient.
*/
- size_t min_block_len = chip_len / 2 / max_coeff;
- size_t block_len = max(min_block_len, default_block_len);
+ if (!fixed_block_len) {
+ size_t min_block_len = chip_len / 2 / max_coeff;
+ block_len = max(min_block_len, default_block_len);
+ }
*len = min(block_len * coeff, chip_len);
}
@@ -80,7 +94,7 @@
bool protect_top = bits->tb_bit_present ? (bits->tb == 0) : 1;
/* Apply CMP bit */
- if (bits->cmp_bit_present && bits->cmp == 1) {
+ if (cmp) {
*len = chip_len - *len;
protect_top = !protect_top;
}
@@ -91,3 +105,41 @@
else
*start = 0;
}
+
+/*
+ * Protection range calculation that works with many common SPI flash chips.
+ */
+void decode_range_spi25(size_t *start, size_t *len, const struct wp_bits *bits, size_t chip_len)
+{
+ decode_range_generic(start, len, bits, chip_len,
+ /*fixed_block_len=*/false, /*apply_cmp_to_bp=*/false, /*coeff_offset=*/1);
+}
+
+/*
+ * Do not adjust block size to be able to fill half of the chip.
+ */
+void decode_range_spi25_64k_block(size_t *start, size_t *len, const struct wp_bits *bits, size_t chip_len)
+{
+ decode_range_generic(start, len, bits, chip_len,
+ /*fixed_block_len=*/true, /*apply_cmp_to_bp=*/false, /*coeff_offset=*/1);
+}
+
+/*
+ * Inverts BP bits when CMP is set and treats all ones in BP bits as a request to protect whole chip regardless
+ * of the CMP bit.
+ */
+void decode_range_spi25_bit_cmp(size_t *start, size_t *len, const struct wp_bits *bits, size_t chip_len)
+{
+ decode_range_generic(start, len, bits, chip_len,
+ /*fixed_block_len=*/false, /*apply_cmp_to_bp=*/true, /*coeff_offset=*/1);
+}
+
+/*
+ * This multiplies coefficient by 2. To be used with chips which have more BP bits than needed, such that the
+ * most significant BP bit effectively acts as "protect whole chip" flag.
+ */
+void decode_range_spi25_2x_block(size_t *start, size_t *len, const struct wp_bits *bits, size_t chip_len)
+{
+ decode_range_generic(start, len, bits, chip_len,
+ /*fixed_block_len=*/false, /*apply_cmp_to_bp=*/false, /*coeff_offset=*/0);
+}