Coding-style fixes for flashrom, partly indent-aided
Corresponding to flashrom svn r326 and coreboot v2 svn r3669.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
diff --git a/board_enable.c b/board_enable.c
index e2a87c6..0834828 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -357,7 +357,7 @@
uint16_t port;
uint8_t val;
- dev = pci_dev_find(0x8086, 0x2440); /* Intel ICH2 LPC */
+ dev = pci_dev_find(0x8086, 0x2440); /* Intel ICH2 LPC */
if (!dev) {
fprintf(stderr, "\nERROR: ICH2 LPC bridge not found.\n");
return -1;
@@ -367,8 +367,8 @@
port = (pci_read_word(dev, 0x58) & 0xFFC0) + 0xE;
val = INB(port);
- val |= 0x80; /* Top Block Lock -- pin 8 of PLCC32 */
- val |= 0x40; /* Lower Blocks Lock -- pin 7 of PLCC32 */
+ val |= 0x80; /* Top Block Lock -- pin 8 of PLCC32 */
+ val |= 0x40; /* Lower Blocks Lock -- pin 7 of PLCC32 */
OUTB(val, port);
return 0;
@@ -405,7 +405,7 @@
return -1;
}
- if (read(msr_fd, (void*) msr, 8) != 8) {
+ if (read(msr_fd, (void *)msr, 8) != 8) {
perror("read");
close(msr_fd);
return -1;
@@ -419,7 +419,7 @@
msr[0] &= ~(DBE6x_PRI_BOOT_LOC | DBE6x_SEC_BOOT_LOC);
msr[0] |= ((boot_loc << DBE6x_PRI_BOOT_LOC_SHIFT) |
- (boot_loc << DBE6x_SEC_BOOT_LOC_SHIFT));
+ (boot_loc << DBE6x_SEC_BOOT_LOC_SHIFT));
if (lseek(msr_fd, DBE6x_MSR_DIVIL_BALL_OPTS, SEEK_SET) == -1) {
perror("lseek");
@@ -427,7 +427,7 @@
return -1;
}
- if (write(msr_fd, (void*) msr, 8) != 8) {
+ if (write(msr_fd, (void *)msr, 8) != 8) {
perror("write");
close(msr_fd);
return -1;
@@ -458,7 +458,7 @@
uint16_t gpiobar;
uint32_t reg32;
- dev = pci_dev_find(ich_vendor, ich_device); /* Intel ICHx LPC */
+ dev = pci_dev_find(ich_vendor, ich_device); /* Intel ICHx LPC */
if (!dev) {
fprintf(stderr, "\nERROR: ICHx LPC dev %4x:%4x not found.\n",
ich_vendor, ich_device);
@@ -492,7 +492,7 @@
#define ICH7_GPIO_LVL2 0x38
- dev = pci_dev_find(0x8086, 0x27b8); /* Intel ICH7 LPC */
+ dev = pci_dev_find(0x8086, 0x27b8); /* Intel ICH7 LPC */
if (!dev) {
// This will never happen on this board
fprintf(stderr, "\nERROR: ICH7 LPC bridge not found.\n");
@@ -664,12 +664,12 @@
"artecgroup", "dbe61", "Artec Group DBE61", board_artecgroup_dbe6x},
{0x1022, 0x2090, 0x0000, 0x0000, 0x1022, 0x2080, 0x0000, 0x0000,
"artecgroup", "dbe62", "Artec Group DBE62", board_artecgroup_dbe6x},
- {0x8086, 0x27b8, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
- "kontron", "986lcd-m", "Kontron 986LCD-M", board_kontron_986lcd_m},
- {0x1106, 0x3149, 0x1565, 0x3206, 0x1106, 0x3344, 0x1565, 0x1202,
- NULL, NULL, "BioStar P4M80-M4", board_biostar_p4m80_m4},
- {0x1106, 0x3227, 0x1458, 0x5001, 0x10ec, 0x8139, 0x1458, 0xe000,
- NULL, NULL, "GIGABYTE GA-7VT600", board_biostar_p4m80_m4},
+ {0x8086, 0x27b8, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ "kontron", "986lcd-m", "Kontron 986LCD-M", board_kontron_986lcd_m},
+ {0x1106, 0x3149, 0x1565, 0x3206, 0x1106, 0x3344, 0x1565, 0x1202,
+ NULL, NULL, "BioStar P4M80-M4", board_biostar_p4m80_m4},
+ {0x1106, 0x3227, 0x1458, 0x5001, 0x10ec, 0x8139, 0x1458, 0xe000,
+ NULL, NULL, "GIGABYTE GA-7VT600", board_biostar_p4m80_m4},
{0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c,
NULL, NULL, "MSI K8T Neo2", w83627thf_gpio4_4_raise_2e},
{0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL} /* Keep this */
@@ -699,13 +699,15 @@
* Match boards on coreboot table gathered vendor and part name.
* Require main PCI IDs to match too as extra safety.
*/
-static struct board_pciid_enable *board_match_coreboot_name(const char *vendor, const char *part)
+static struct board_pciid_enable *board_match_coreboot_name(const char *vendor,
+ const char *part)
{
struct board_pciid_enable *board = board_pciid_enables;
struct board_pciid_enable *partmatch = NULL;
for (; board->name; board++) {
- if (vendor && (!board->lb_vendor || strcasecmp(board->lb_vendor, vendor)))
+ if (vendor && (!board->lb_vendor
+ || strcasecmp(board->lb_vendor, vendor)))
continue;
if (!board->lb_part || strcasecmp(board->lb_part, part))
@@ -715,7 +717,7 @@
continue;
if (board->second_vendor &&
- !pci_dev_find(board->second_vendor, board->second_device))
+ !pci_dev_find(board->second_vendor, board->second_device))
continue;
if (vendor)
@@ -725,7 +727,7 @@
/* a second entry has a matching part name */
printf("AMBIGUOUS BOARD NAME: %s\n", part);
printf("At least vendors '%s' and '%s' match.\n",
- partmatch->lb_vendor, board->lb_vendor);
+ partmatch->lb_vendor, board->lb_vendor);
printf("Please use the full -m vendor:part syntax.\n");
return NULL;
}
@@ -752,20 +754,20 @@
continue;
if (!pci_card_find(board->first_vendor, board->first_device,
- board->first_card_vendor,
- board->first_card_device))
+ board->first_card_vendor,
+ board->first_card_device))
continue;
if (board->second_vendor) {
if (board->second_card_vendor) {
if (!pci_card_find(board->second_vendor,
- board->second_device,
- board->second_card_vendor,
- board->second_card_device))
+ board->second_device,
+ board->second_card_vendor,
+ board->second_card_device))
continue;
} else {
if (!pci_dev_find(board->second_vendor,
- board->second_device))
+ board->second_device))
continue;
}
}
@@ -789,7 +791,7 @@
if (board) {
printf("Found board \"%s\", enabling flash write... ",
- board->name);
+ board->name);
ret = board->enable(board->name);
if (ret)