Various coding style fixes, constification, fixed typos
Also, s/0xFF80/0xFFC0/ in the Acorp 6A815EPD board-enable, as per
http://www.linuxbios.org/pipermail/linuxbios/2007-December/027750.html
Corresponding to flashrom svn r162 and coreboot v2 svn r2997.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
diff --git a/board_enable.c b/board_enable.c
index 13c4f1f..2610a53 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -50,13 +50,13 @@
static unsigned char wbsio_read(uint16_t index, uint8_t reg)
{
outb(reg, index);
- return inb(index+1);
+ return inb(index + 1);
}
static void wbsio_write(uint16_t index, uint8_t reg, uint8_t data)
{
outb(reg, index);
- outb(data, index+1);
+ outb(data, index + 1);
}
static void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask)
@@ -64,8 +64,8 @@
uint8_t tmp;
outb(reg, index);
- tmp = inb(index+1) & ~mask;
- outb(tmp | (data & mask), index+1);
+ tmp = inb(index + 1) & ~mask;
+ outb(tmp | (data & mask), index + 1);
}
/**
@@ -79,8 +79,8 @@
{
w836xx_ext_enter(index);
- /* Is this the w83627hf? */
- if (wbsio_read(index, 0x20) != 0x52) { /* Super I/O device ID register */
+ /* Is this the W83627HF? */
+ if (wbsio_read(index, 0x20) != 0x52) { /* Super I/O device ID reg. */
fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n",
name, wbsio_read(index, 0x20));
w836xx_ext_leave(index);
@@ -90,14 +90,12 @@
/* PIN89S: WDTO/GP24 multiplex -> GPIO24 */
wbsio_mask(index, 0x2B, 0x10, 0x10);
- wbsio_write(index, 0x07, 0x08); /* Select logical device 8: GPIO port 2 */
+ /* Select logical device 8: GPIO port 2 */
+ wbsio_write(index, 0x07, 0x08);
wbsio_mask(index, 0x30, 0x01, 0x01); /* Activate logical device. */
-
wbsio_mask(index, 0xF0, 0x00, 0x10); /* GPIO24 -> output */
-
wbsio_mask(index, 0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */
-
wbsio_mask(index, 0xF1, 0x10, 0x10); /* Raise GPIO24 */
w836xx_ext_leave(index);
@@ -107,6 +105,7 @@
static int w83627hf_gpio24_raise_2e(const char *name)
{
+ /* TODO: Typo? Shouldn't this be 0x2e? */
return w83627hf_gpio24_raise(0x2d, name);
}
@@ -119,8 +118,9 @@
static int w83627thf_gpio4_4_raise(uint16_t index, const char *name)
{
w836xx_ext_enter(index);
- /* Is this the w83627thf? */
- if (wbsio_read(index, 0x20) != 0x82) { /* Super I/O device ID register */
+
+ /* Is this the W83627THF? */
+ if (wbsio_read(index, 0x20) != 0x82) { /* Super I/O device ID reg. */
fprintf(stderr, "\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n",
name, wbsio_read(index, 0x20));
w836xx_ext_leave(index);
@@ -129,15 +129,11 @@
/* PINxxxxS: GPIO4/bit 4 multiplex -> GPIOXXX */
- wbsio_write(index, 0x07, 0x09); /* Select logical device 9: GPIO port 4 */
-
- wbsio_mask(index, 0x30, 0x02, 0x02); /* Activate logical device. */
-
- wbsio_mask(index, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */
-
- wbsio_mask(index, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */
-
- wbsio_mask(index, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */
+ wbsio_write(index, 0x07, 0x09); /* Select LDN 9: GPIO port 4 */
+ wbsio_mask(index, 0x30, 0x02, 0x02); /* Activate logical device. */
+ wbsio_mask(index, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */
+ wbsio_mask(index, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */
+ wbsio_mask(index, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */
w836xx_ext_leave(index);
@@ -146,8 +142,9 @@
static int w83627thf_gpio4_4_raise_4e(const char *name)
{
- return w83627thf_gpio4_4_raise(0x4E, name);
+ return w83627thf_gpio4_4_raise(0x4e, name);
}
+
/**
* Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs.
*
@@ -156,7 +153,7 @@
static int board_via_epia_m(const char *name)
{
struct pci_dev *dev;
- unsigned int base;
+ uint16_t base;
uint8_t val;
dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
@@ -173,7 +170,7 @@
/* Get Power Management IO address. */
base = pci_read_word(dev, 0x88) & 0xFF80;
- /* enable GPIO15 which is connected to write protect. */
+ /* Enable GPIO15 which is connected to write protect. */
val = inb(base + 0x4D);
val |= 0x80;
outb(val, base + 0x4D);
@@ -199,16 +196,16 @@
return -1;
}
- /* This bit is marked reserved actually */
+ /* This bit is marked reserved actually. */
val = pci_read_byte(dev, 0x59);
val &= 0x7F;
pci_write_byte(dev, 0x59, val);
- /* Raise ROM MEMW# line on Winbond w83697 SuperIO */
+ /* Raise ROM MEMW# line on Winbond W83697 Super I/O. */
w836xx_ext_enter(0x2E);
- if (!(wbsio_read(0x2E, 0x24) & 0x02)) /* flash rom enabled? */
- wbsio_mask(0x2E, 0x24, 0x08, 0x08); /* enable MEMW# */
+ if (!(wbsio_read(0x2E, 0x24) & 0x02)) /* Flash ROM enabled? */
+ wbsio_mask(0x2E, 0x24, 0x08, 0x08); /* Enable MEMW#. */
w836xx_ext_leave(0x2E);
@@ -323,7 +320,7 @@
}
/**
- * Suited for Acorp 6A815EPD
+ * Suited for Acorp 6A815EPD.
*/
static int board_acorp_6a815epd(const char *name)
{
@@ -338,7 +335,7 @@
}
/* Use GPIOBASE register to find where the GPIO is mapped. */
- port = (pci_read_word(dev, 0x58) & 0xFF80) + 0xE;
+ port = (pci_read_word(dev, 0x58) & 0xFFC0) + 0xE;
val = inb(port);
val |= 0x80; /* Top Block Lock -- pin 8 of PLCC32 */
@@ -357,25 +354,25 @@
* Keep the second set NULLed if it should be ignored.
*/
struct board_pciid_enable {
- /* Any device, but make it sensible, like the isa bridge. */
+ /* Any device, but make it sensible, like the ISA bridge. */
uint16_t first_vendor;
uint16_t first_device;
uint16_t first_card_vendor;
uint16_t first_card_device;
/* Any device, but make it sensible, like
- * the host bridge. May be NULL
+ * the host bridge. May be NULL.
*/
uint16_t second_vendor;
uint16_t second_device;
uint16_t second_card_vendor;
uint16_t second_card_device;
- /* From linuxbios table */
- char *lb_vendor;
- char *lb_part;
+ /* The vendor / part name from the LinuxBIOS table. */
+ const char *lb_vendor;
+ const char *lb_part;
- char *name;
+ const char *name;
int (*enable) (const char *name);
};
@@ -411,8 +408,7 @@
* Match boards on LinuxBIOS table gathered vendor and part name.
* Require main PCI IDs to match too as extra safety.
*/
-static struct board_pciid_enable *board_match_linuxbios_name(char *vendor,
- char *part)
+static struct board_pciid_enable *board_match_linuxbios_name(const char *vendor, const char *part)
{
struct board_pciid_enable *board = board_pciid_enables;
@@ -431,7 +427,9 @@
continue;
return board;
}
+
printf("NOT FOUND %s:%s\n", vendor, part);
+
return NULL;
}
@@ -472,7 +470,7 @@
return NULL;
}
-int board_flash_enable(char *vendor, char *part)
+int board_flash_enable(const char *vendor, const char *part)
{
struct board_pciid_enable *board = NULL;
int ret = 0;