flashchips: Add Zetta Device ZD25LQ64/128 1.8V parts
Datasheets for both look very much the same. Block protection and
QPI implementations seem to follow Winbond.
Datasheets used:
http://www.zettadevice.com/upload/file/pdf/DS_Zetta_25LQ64_RevA_20180801.pdf
http://www.zettadevice.com/upload/file/20150821/DS_Zetta_25LQ128_RevA_20180815.pdf
Change-Id: Iea8c4076105910b4e0975b02a92f287ded745eae
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.sourcearcade.org/c/flashprog/+/280
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
diff --git a/flashchips.c b/flashchips.c
index 68beefc..86d27fa 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -21676,6 +21676,118 @@
},
{
+ .vendor = "Zetta Device",
+ .name = "ZD25LQ64",
+ .bustype = BUS_SPI,
+ .manufacture_id = ZETTADEVICE_ID,
+ .model_id = ZETTADEVICE_ZD25LQ64,
+ .total_size = 8192,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_WRSR2 | FEATURE_WRSR_EXT2 |
+ FEATURE_OTP | FEATURE_QPI_SRP,
+ .dummy_cycles = { .qpi_read_params = { 4, 4, 6, 8 } },
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 2048} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 256} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 128} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {8192 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {8192 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RW},
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 0, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+ .tb = {STATUS1, 5, RW},
+ .sec = {STATUS1, 6, RW},
+ .cmp = {STATUS2, 6, RW},
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .printlock = spi_prettyprint_status_register_bp2_srwd,
+ .unlock = spi_disable_blockprotect_bp2_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {1650, 1950},
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
+ .vendor = "Zetta Device",
+ .name = "ZD25LQ128",
+ .bustype = BUS_SPI,
+ .manufacture_id = ZETTADEVICE_ID,
+ .model_id = ZETTADEVICE_ZD25LQ128,
+ .total_size = 16384,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_WRSR2 | FEATURE_WRSR_EXT2 |
+ FEATURE_OTP | FEATURE_QPI_SRP,
+ .dummy_cycles = { .qpi_read_params = { 4, 4, 6, 8 } },
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 4096} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {32 * 1024, 512} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 256} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {16384 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {16384 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .reg_bits =
+ {
+ .qe = {STATUS2, 1, RW},
+ .srp = {STATUS1, 7, RW},
+ .srl = {STATUS2, 0, RW},
+ .bp = {{STATUS1, 2, RW}, {STATUS1, 3, RW}, {STATUS1, 4, RW}},
+ .tb = {STATUS1, 5, RW},
+ .sec = {STATUS1, 6, RW},
+ .cmp = {STATUS2, 6, RW},
+ },
+ .wp_write_cfg = spi_wp_write_cfg,
+ .wp_read_cfg = spi_wp_read_cfg,
+ .wp_get_ranges = spi_wp_get_available_ranges,
+ .decode_range = decode_range_spi25,
+ .printlock = spi_prettyprint_status_register_bp2_srwd,
+ .unlock = spi_disable_blockprotect_bp2_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read,
+ .voltage = {1650, 1950},
+ .prepare_access = spi_prepare_io,
+ .finish_access = spi_finish_io,
+ },
+
+ {
.vendor = "Unknown",
.name = "SFDP-capable chip",
.bustype = BUS_SPI,
diff --git a/include/flashchips.h b/include/flashchips.h
index 2c73dd8..dc0eab8 100644
--- a/include/flashchips.h
+++ b/include/flashchips.h
@@ -1026,5 +1026,7 @@
#define ZETTADEVICE_ID 0xBA /* Zetta Device */
#define ZETTADEVICE_ZD25D20 0x2012
#define ZETTADEVICE_ZD25D40 0x2013
+#define ZETTADEVICE_ZD25LQ64 0x4317
+#define ZETTADEVICE_ZD25LQ128 0x4218
#endif /* !FLASHCHIPS_H */