Convert various prints to use msg_p* and msg_g* respectively
Convert programmer print messages to msg_p* convert general print messages to msg_g* a few fixes as suggested by Carl-Daniel.
Corresponding to flashrom svn r997.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
diff --git a/chipset_enable.c b/chipset_enable.c
index fc60484..69f1623 100644
--- a/chipset_enable.c
+++ b/chipset_enable.c
@@ -74,8 +74,8 @@
pci_write_byte(dev, 0x40, new);
newer = pci_read_byte(dev, 0x40);
if (newer != new) {
- printf_debug("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x40, new, name);
- printf_debug("Stuck at 0x%x\n", newer);
+ msg_pinfo("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x40, new, name);
+ msg_pinfo("Stuck at 0x%x\n", newer);
return -1;
}
return 0;
@@ -91,9 +91,9 @@
if (!sbdev)
sbdev = pci_dev_find_vendorclass(vendor, 0x0000);
if (!sbdev)
- fprintf(stderr, "No southbridge found for %s!\n", name);
+ msg_perr("No southbridge found for %s!\n", name);
if (sbdev)
- printf_debug("Found southbridge %04x:%04x at %02x:%02x:%01x\n",
+ msg_pdbg("Found southbridge %04x:%04x at %02x:%02x:%01x\n",
sbdev->vendor_id, sbdev->device_id,
sbdev->bus, sbdev->dev, sbdev->func);
return sbdev;
@@ -162,8 +162,8 @@
pci_write_byte(sbdev, 0x45, new);
newer = pci_read_byte(sbdev, 0x45);
if (newer != new) {
- printf_debug("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x45, new, name);
- printf_debug("Stuck at 0x%x\n", newer);
+ msg_pinfo("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x45, new, name);
+ msg_pinfo("Stuck at 0x%x\n", newer);
ret = -1;
}
@@ -188,8 +188,8 @@
pci_write_byte(sbdev, 0x45, new);
newer = pci_read_byte(sbdev, 0x45);
if (newer != new) {
- printf_debug("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x45, new, name);
- printf_debug("Stuck at 0x%x\n", newer);
+ msg_pinfo("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x45, new, name);
+ msg_pinfo("Stuck at 0x%x\n", newer);
ret = -1;
}
@@ -235,7 +235,7 @@
pci_write_word(dev, xbcs, new);
if (pci_read_word(dev, xbcs) != new) {
- printf_debug("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", xbcs, new, name);
+ msg_pinfo("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", xbcs, new, name);
return -1;
}
@@ -257,11 +257,11 @@
*/
old = pci_read_byte(dev, bios_cntl);
- printf_debug("\nBIOS Lock Enable: %sabled, ",
+ msg_pdbg("\nBIOS Lock Enable: %sabled, ",
(old & (1 << 1)) ? "en" : "dis");
- printf_debug("BIOS Write Enable: %sabled, ",
+ msg_pdbg("BIOS Write Enable: %sabled, ",
(old & (1 << 0)) ? "en" : "dis");
- printf_debug("BIOS_CNTL is 0x%x\n", old);
+ msg_pdbg("BIOS_CNTL is 0x%x\n", old);
new = old | 1;
@@ -271,7 +271,7 @@
pci_write_byte(dev, bios_cntl, new);
if (pci_read_byte(dev, bios_cntl) != new) {
- printf_debug("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", bios_cntl, new, name);
+ msg_pinfo("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", bios_cntl, new, name);
return -1;
}
@@ -306,7 +306,7 @@
fwh_conf = (uint32_t)strtoul(idsel, NULL, 0);
/* FIXME: Need to undo this on shutdown. */
- printf("\nSetting IDSEL=0x%x for top 16 MB", fwh_conf);
+ msg_pinfo("\nSetting IDSEL=0x%x for top 16 MB", fwh_conf);
pci_write_long(dev, 0xd0, fwh_conf);
pci_write_word(dev, 0xd4, fwh_conf);
/* FIXME: Decode settings are not changed. */
@@ -321,7 +321,7 @@
fwh_conf = pci_read_long(dev, 0xd0);
for (i = 7; i >= 0; i--) {
tmp = (fwh_conf >> (i * 4)) & 0xf;
- printf_debug("\n0x%08x/0x%08x FWH IDSEL: 0x%x",
+ msg_pdbg("\n0x%08x/0x%08x FWH IDSEL: 0x%x",
(0x1ff8 + i) * 0x80000,
(0x1ff0 + i) * 0x80000,
tmp);
@@ -335,7 +335,7 @@
fwh_conf = pci_read_word(dev, 0xd4);
for (i = 3; i >= 0; i--) {
tmp = (fwh_conf >> (i * 4)) & 0xf;
- printf_debug("\n0x%08x/0x%08x FWH IDSEL: 0x%x",
+ msg_pdbg("\n0x%08x/0x%08x FWH IDSEL: 0x%x",
(0xff4 + i) * 0x100000,
(0xff0 + i) * 0x100000,
tmp);
@@ -350,7 +350,7 @@
fwh_conf = pci_read_word(dev, 0xd8);
for (i = 7; i >= 0; i--) {
tmp = (fwh_conf >> (i + 0x8)) & 0x1;
- printf_debug("\n0x%08x/0x%08x FWH decode %sabled",
+ msg_pdbg("\n0x%08x/0x%08x FWH decode %sabled",
(0x1ff8 + i) * 0x80000,
(0x1ff0 + i) * 0x80000,
tmp ? "en" : "dis");
@@ -362,7 +362,7 @@
}
for (i = 3; i >= 0; i--) {
tmp = (fwh_conf >> i) & 0x1;
- printf_debug("\n0x%08x/0x%08x FWH decode %sabled",
+ msg_pdbg("\n0x%08x/0x%08x FWH decode %sabled",
(0xff4 + i) * 0x100000,
(0xff0 + i) * 0x100000,
tmp ? "en" : "dis");
@@ -373,7 +373,7 @@
}
}
max_rom_decode.fwh = min(max_decode_fwh_idsel, max_decode_fwh_decode);
- printf_debug("\nMaximum FWH chip size: 0x%x bytes", max_rom_decode.fwh);
+ msg_pdbg("\nMaximum FWH chip size: 0x%x bytes", max_rom_decode.fwh);
/* If we're called by enable_flash_ich_dc_spi, it will override
* buses_supported anyway.
@@ -391,7 +391,7 @@
return err;
old = pci_read_byte(dev, 0xd9);
- printf_debug("BIOS Prefetch Enable: %sabled, ",
+ msg_pdbg("BIOS Prefetch Enable: %sabled, ",
(old & 1) ? "en" : "dis");
new = old & ~1;
@@ -413,10 +413,10 @@
/* Do we really need no write enable? */
mmio_base = (pci_read_long(dev, 0xbc)) << 8;
- printf_debug("MMIO base at = 0x%x\n", mmio_base);
+ msg_pdbg("MMIO base at = 0x%x\n", mmio_base);
spibar = physmap("VT8237S MMIO registers", mmio_base, 0x70);
- printf_debug("0x6c: 0x%04x (CLOCK/DEBUG)\n",
+ msg_pdbg("0x6c: 0x%04x (CLOCK/DEBUG)\n",
mmio_readw(spibar + 0x6c));
/* Not sure if it speaks all these bus protocols. */
@@ -444,20 +444,20 @@
/* Get physical address of Root Complex Register Block */
tmp = pci_read_long(dev, 0xf0) & 0xffffc000;
- printf_debug("\nRoot Complex Register Block address = 0x%x\n", tmp);
+ msg_pdbg("\nRoot Complex Register Block address = 0x%x\n", tmp);
/* Map RCBA to virtual memory */
rcrb = physmap("ICH RCRB", tmp, 0x4000);
gcs = mmio_readl(rcrb + 0x3410);
- printf_debug("GCS = 0x%x: ", gcs);
- printf_debug("BIOS Interface Lock-Down: %sabled, ",
+ msg_pdbg("GCS = 0x%x: ", gcs);
+ msg_pdbg("BIOS Interface Lock-Down: %sabled, ",
(gcs & 0x1) ? "en" : "dis");
bbs = (gcs >> 10) & 0x3;
- printf_debug("BOOT BIOS Straps: 0x%x (%s)\n", bbs, straps_names[bbs]);
+ msg_pdbg("BOOT BIOS Straps: 0x%x (%s)\n", bbs, straps_names[bbs]);
buc = mmio_readb(rcrb + 0x3414);
- printf_debug("Top Swap : %s\n",
+ msg_pdbg("Top Swap : %s\n",
(buc & 1) ? "enabled (A16 inverted)" : "not enabled");
/* It seems the ICH7 does not support SPI and LPC chips at the same
@@ -492,105 +492,105 @@
}
/* SPIBAR is at RCRB+0x3020 for ICH[78] and RCRB+0x3800 for ICH9. */
- printf_debug("SPIBAR = 0x%x + 0x%04x\n", tmp, spibar_offset);
+ msg_pdbg("SPIBAR = 0x%x + 0x%04x\n", tmp, spibar_offset);
/* Assign Virtual Address */
spibar = rcrb + spibar_offset;
switch (spi_controller) {
case SPI_CONTROLLER_ICH7:
- printf_debug("0x00: 0x%04x (SPIS)\n",
+ msg_pdbg("0x00: 0x%04x (SPIS)\n",
mmio_readw(spibar + 0));
- printf_debug("0x02: 0x%04x (SPIC)\n",
+ msg_pdbg("0x02: 0x%04x (SPIC)\n",
mmio_readw(spibar + 2));
- printf_debug("0x04: 0x%08x (SPIA)\n",
+ msg_pdbg("0x04: 0x%08x (SPIA)\n",
mmio_readl(spibar + 4));
for (i = 0; i < 8; i++) {
int offs;
offs = 8 + (i * 8);
- printf_debug("0x%02x: 0x%08x (SPID%d)\n", offs,
+ msg_pdbg("0x%02x: 0x%08x (SPID%d)\n", offs,
mmio_readl(spibar + offs), i);
- printf_debug("0x%02x: 0x%08x (SPID%d+4)\n", offs + 4,
+ msg_pdbg("0x%02x: 0x%08x (SPID%d+4)\n", offs + 4,
mmio_readl(spibar + offs + 4), i);
}
- printf_debug("0x50: 0x%08x (BBAR)\n",
+ msg_pdbg("0x50: 0x%08x (BBAR)\n",
mmio_readl(spibar + 0x50));
- printf_debug("0x54: 0x%04x (PREOP)\n",
+ msg_pdbg("0x54: 0x%04x (PREOP)\n",
mmio_readw(spibar + 0x54));
- printf_debug("0x56: 0x%04x (OPTYPE)\n",
+ msg_pdbg("0x56: 0x%04x (OPTYPE)\n",
mmio_readw(spibar + 0x56));
- printf_debug("0x58: 0x%08x (OPMENU)\n",
+ msg_pdbg("0x58: 0x%08x (OPMENU)\n",
mmio_readl(spibar + 0x58));
- printf_debug("0x5c: 0x%08x (OPMENU+4)\n",
+ msg_pdbg("0x5c: 0x%08x (OPMENU+4)\n",
mmio_readl(spibar + 0x5c));
for (i = 0; i < 4; i++) {
int offs;
offs = 0x60 + (i * 4);
- printf_debug("0x%02x: 0x%08x (PBR%d)\n", offs,
+ msg_pdbg("0x%02x: 0x%08x (PBR%d)\n", offs,
mmio_readl(spibar + offs), i);
}
- printf_debug("\n");
+ msg_pdbg("\n");
if (mmio_readw(spibar) & (1 << 15)) {
- printf("WARNING: SPI Configuration Lockdown activated.\n");
+ msg_pinfo("WARNING: SPI Configuration Lockdown activated.\n");
ichspi_lock = 1;
}
ich_init_opcodes();
break;
case SPI_CONTROLLER_ICH9:
tmp2 = mmio_readw(spibar + 4);
- printf_debug("0x04: 0x%04x (HSFS)\n", tmp2);
- printf_debug("FLOCKDN %i, ", (tmp2 >> 15 & 1));
- printf_debug("FDV %i, ", (tmp2 >> 14) & 1);
- printf_debug("FDOPSS %i, ", (tmp2 >> 13) & 1);
- printf_debug("SCIP %i, ", (tmp2 >> 5) & 1);
- printf_debug("BERASE %i, ", (tmp2 >> 3) & 3);
- printf_debug("AEL %i, ", (tmp2 >> 2) & 1);
- printf_debug("FCERR %i, ", (tmp2 >> 1) & 1);
- printf_debug("FDONE %i\n", (tmp2 >> 0) & 1);
+ msg_pdbg("0x04: 0x%04x (HSFS)\n", tmp2);
+ msg_pdbg("FLOCKDN %i, ", (tmp2 >> 15 & 1));
+ msg_pdbg("FDV %i, ", (tmp2 >> 14) & 1);
+ msg_pdbg("FDOPSS %i, ", (tmp2 >> 13) & 1);
+ msg_pdbg("SCIP %i, ", (tmp2 >> 5) & 1);
+ msg_pdbg("BERASE %i, ", (tmp2 >> 3) & 3);
+ msg_pdbg("AEL %i, ", (tmp2 >> 2) & 1);
+ msg_pdbg("FCERR %i, ", (tmp2 >> 1) & 1);
+ msg_pdbg("FDONE %i\n", (tmp2 >> 0) & 1);
tmp = mmio_readl(spibar + 0x50);
- printf_debug("0x50: 0x%08x (FRAP)\n", tmp);
- printf_debug("BMWAG %i, ", (tmp >> 24) & 0xff);
- printf_debug("BMRAG %i, ", (tmp >> 16) & 0xff);
- printf_debug("BRWA %i, ", (tmp >> 8) & 0xff);
- printf_debug("BRRA %i\n", (tmp >> 0) & 0xff);
+ msg_pdbg("0x50: 0x%08x (FRAP)\n", tmp);
+ msg_pdbg("BMWAG %i, ", (tmp >> 24) & 0xff);
+ msg_pdbg("BMRAG %i, ", (tmp >> 16) & 0xff);
+ msg_pdbg("BRWA %i, ", (tmp >> 8) & 0xff);
+ msg_pdbg("BRRA %i\n", (tmp >> 0) & 0xff);
- printf_debug("0x54: 0x%08x (FREG0)\n",
+ msg_pdbg("0x54: 0x%08x (FREG0)\n",
mmio_readl(spibar + 0x54));
- printf_debug("0x58: 0x%08x (FREG1)\n",
+ msg_pdbg("0x58: 0x%08x (FREG1)\n",
mmio_readl(spibar + 0x58));
- printf_debug("0x5C: 0x%08x (FREG2)\n",
+ msg_pdbg("0x5C: 0x%08x (FREG2)\n",
mmio_readl(spibar + 0x5C));
- printf_debug("0x60: 0x%08x (FREG3)\n",
+ msg_pdbg("0x60: 0x%08x (FREG3)\n",
mmio_readl(spibar + 0x60));
- printf_debug("0x64: 0x%08x (FREG4)\n",
+ msg_pdbg("0x64: 0x%08x (FREG4)\n",
mmio_readl(spibar + 0x64));
- printf_debug("0x74: 0x%08x (PR0)\n",
+ msg_pdbg("0x74: 0x%08x (PR0)\n",
mmio_readl(spibar + 0x74));
- printf_debug("0x78: 0x%08x (PR1)\n",
+ msg_pdbg("0x78: 0x%08x (PR1)\n",
mmio_readl(spibar + 0x78));
- printf_debug("0x7C: 0x%08x (PR2)\n",
+ msg_pdbg("0x7C: 0x%08x (PR2)\n",
mmio_readl(spibar + 0x7C));
- printf_debug("0x80: 0x%08x (PR3)\n",
+ msg_pdbg("0x80: 0x%08x (PR3)\n",
mmio_readl(spibar + 0x80));
- printf_debug("0x84: 0x%08x (PR4)\n",
+ msg_pdbg("0x84: 0x%08x (PR4)\n",
mmio_readl(spibar + 0x84));
- printf_debug("0x90: 0x%08x (SSFS, SSFC)\n",
+ msg_pdbg("0x90: 0x%08x (SSFS, SSFC)\n",
mmio_readl(spibar + 0x90));
- printf_debug("0x94: 0x%04x (PREOP)\n",
+ msg_pdbg("0x94: 0x%04x (PREOP)\n",
mmio_readw(spibar + 0x94));
- printf_debug("0x96: 0x%04x (OPTYPE)\n",
+ msg_pdbg("0x96: 0x%04x (OPTYPE)\n",
mmio_readw(spibar + 0x96));
- printf_debug("0x98: 0x%08x (OPMENU)\n",
+ msg_pdbg("0x98: 0x%08x (OPMENU)\n",
mmio_readl(spibar + 0x98));
- printf_debug("0x9C: 0x%08x (OPMENU+4)\n",
+ msg_pdbg("0x9C: 0x%08x (OPMENU+4)\n",
mmio_readl(spibar + 0x9C));
- printf_debug("0xA0: 0x%08x (BBAR)\n",
+ msg_pdbg("0xA0: 0x%08x (BBAR)\n",
mmio_readl(spibar + 0xA0));
- printf_debug("0xB0: 0x%08x (FDOC)\n",
+ msg_pdbg("0xB0: 0x%08x (FDOC)\n",
mmio_readl(spibar + 0xB0));
if (tmp2 & (1 << 15)) {
- printf("WARNING: SPI Configuration Lockdown activated.\n");
+ msg_pinfo("WARNING: SPI Configuration Lockdown activated.\n");
ichspi_lock = 1;
}
ich_init_opcodes();
@@ -601,18 +601,18 @@
}
old = pci_read_byte(dev, 0xdc);
- printf_debug("SPI Read Configuration: ");
+ msg_pdbg("SPI Read Configuration: ");
new = (old >> 2) & 0x3;
switch (new) {
case 0:
case 1:
case 2:
- printf_debug("prefetching %sabled, caching %sabled, ",
+ msg_pdbg("prefetching %sabled, caching %sabled, ",
(new & 0x2) ? "en" : "dis",
(new & 0x1) ? "dis" : "en");
break;
default:
- printf_debug("invalid prefetching/caching settings, ");
+ msg_pdbg("invalid prefetching/caching settings, ");
break;
}
@@ -652,7 +652,7 @@
pci_write_byte(dev, 0x40, val);
if (pci_read_byte(dev, 0x40) != val) {
- printf("\nWARNING: Failed to enable flash write on \"%s\"\n",
+ msg_pinfo("\nWARNING: Failed to enable flash write on \"%s\"\n",
name);
return -1;
}
@@ -769,7 +769,7 @@
new = pci_read_byte(dev, 0x52);
if (new != 0xee) {
- printf_debug("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x52, new, name);
+ msg_pinfo("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x52, new, name);
return -1;
}
@@ -787,7 +787,7 @@
if (new != old) {
pci_write_byte(dev, 0x43, new);
if (pci_read_byte(dev, 0x43) != new) {
- printf_debug("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x43, new, name);
+ msg_pinfo("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x43, new, name);
}
}
@@ -799,7 +799,7 @@
pci_write_byte(dev, 0x40, new);
if (pci_read_byte(dev, 0x40) != new) {
- printf_debug("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x40, new, name);
+ msg_pinfo("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x40, new, name);
return -1;
}
@@ -819,7 +819,7 @@
/* No protection flags for this region?*/
if ((prot & 0x3) == 0)
continue;
- printf_debug("SB600 %s%sprotected from %u to %u\n",
+ msg_pinfo("SB600 %s%sprotected from %u to %u\n",
(prot & 0x1) ? "write " : "",
(prot & 0x2) ? "read " : "",
(prot & 0xfffffc00),
@@ -828,7 +828,7 @@
pci_write_byte(dev, reg, prot);
prot = pci_read_long(dev, reg);
if (prot & 0x3)
- printf("SB600 %s%sunprotect failed from %u to %u\n",
+ msg_perr("SB600 %s%sunprotect failed from %u to %u\n",
(prot & 0x1) ? "write " : "",
(prot & 0x2) ? "read " : "",
(prot & 0xfffffc00),
@@ -838,7 +838,7 @@
/* Read SPI_BaseAddr */
tmp = pci_read_long(dev, 0xa0);
tmp &= 0xffffffe0; /* remove bits 4-0 (reserved) */
- printf_debug("SPI base address is at 0x%x\n", tmp);
+ msg_pdbg("SPI base address is at 0x%x\n", tmp);
/* If the BAR has address 0, it is unlikely SPI is used. */
if (!tmp)
@@ -854,17 +854,17 @@
sb600_spibar += tmp & 0xfff;
tmp = pci_read_long(dev, 0xa0);
- printf_debug("AltSpiCSEnable=%i, SpiRomEnable=%i, "
+ msg_pdbg("AltSpiCSEnable=%i, SpiRomEnable=%i, "
"AbortEnable=%i\n", tmp & 0x1, (tmp & 0x2) >> 1,
(tmp & 0x4) >> 2);
tmp = (pci_read_byte(dev, 0xba) & 0x4) >> 2;
- printf_debug("PrefetchEnSPIFromIMC=%i, ", tmp);
+ msg_pdbg("PrefetchEnSPIFromIMC=%i, ", tmp);
tmp = pci_read_byte(dev, 0xbb);
- printf_debug("PrefetchEnSPIFromHost=%i, SpiOpEnInLpcMode=%i\n",
+ msg_pdbg("PrefetchEnSPIFromHost=%i, SpiOpEnInLpcMode=%i\n",
tmp & 0x1, (tmp & 0x20) >> 5);
tmp = mmio_readl(sb600_spibar);
- printf_debug("SpiArbEnable=%i, SpiAccessMacRomEn=%i, "
+ msg_pdbg("SpiArbEnable=%i, SpiAccessMacRomEn=%i, "
"SpiHostAccessRomEn=%i, ArbWaitCount=%i, "
"SpiBridgeDisable=%i, DropOneClkOnRd=%i\n",
(tmp >> 19) & 0x1, (tmp >> 22) & 0x1,
@@ -876,7 +876,7 @@
smbus_dev = pci_dev_find(0x1002, 0x4385);
if (has_spi && !smbus_dev) {
- fprintf(stderr, "ERROR: SMBus device not found. Not enabling SPI.\n");
+ msg_perr("ERROR: SMBus device not found. Not enabling SPI.\n");
has_spi = 0;
}
if (has_spi) {
@@ -884,22 +884,22 @@
/* GPIO11/SPI_DO and GPIO12/SPI_DI status */
reg = pci_read_byte(smbus_dev, 0xAB);
reg &= 0xC0;
- printf_debug("GPIO11 used for %s\n", (reg & (1 << 6)) ? "GPIO" : "SPI_DO");
- printf_debug("GPIO12 used for %s\n", (reg & (1 << 7)) ? "GPIO" : "SPI_DI");
+ msg_pdbg("GPIO11 used for %s\n", (reg & (1 << 6)) ? "GPIO" : "SPI_DO");
+ msg_pdbg("GPIO12 used for %s\n", (reg & (1 << 7)) ? "GPIO" : "SPI_DI");
if (reg != 0x00)
has_spi = 0;
/* GPIO31/SPI_HOLD and GPIO32/SPI_CS status */
reg = pci_read_byte(smbus_dev, 0x83);
reg &= 0xC0;
- printf_debug("GPIO31 used for %s\n", (reg & (1 << 6)) ? "GPIO" : "SPI_HOLD");
- printf_debug("GPIO32 used for %s\n", (reg & (1 << 7)) ? "GPIO" : "SPI_CS");
+ msg_pdbg("GPIO31 used for %s\n", (reg & (1 << 6)) ? "GPIO" : "SPI_HOLD");
+ msg_pdbg("GPIO32 used for %s\n", (reg & (1 << 7)) ? "GPIO" : "SPI_CS");
/* SPI_HOLD is not used on all boards, filter it out. */
if ((reg & 0x80) != 0x00)
has_spi = 0;
/* GPIO47/SPI_CLK status */
reg = pci_read_byte(smbus_dev, 0xA7);
reg &= 0x40;
- printf_debug("GPIO47 used for %s\n", (reg & (1 << 6)) ? "GPIO" : "SPI_CLK");
+ msg_pdbg("GPIO47 used for %s\n", (reg & (1 << 6)) ? "GPIO" : "SPI_CLK");
if (reg != 0x00)
has_spi = 0;
}
@@ -914,24 +914,24 @@
OUTB(0x8f, 0xcd6);
reg = INB(0xcd7);
reg &= 0x0e;
- printf_debug("ROM strap override is %sactive", (reg & 0x02) ? "" : "not ");
+ msg_pdbg("ROM strap override is %sactive", (reg & 0x02) ? "" : "not ");
if (reg & 0x02) {
switch ((reg & 0x0c) >> 2) {
case 0x00:
- printf_debug(": LPC");
+ msg_pdbg(": LPC");
break;
case 0x01:
- printf_debug(": PCI");
+ msg_pdbg(": PCI");
break;
case 0x02:
- printf_debug(": FWH");
+ msg_pdbg(": FWH");
break;
case 0x03:
- printf_debug(": SPI");
+ msg_pdbg(": SPI");
break;
}
}
- printf_debug("\n");
+ msg_pdbg("\n");
/* Force enable SPI ROM in SB600 PM register.
* If we enable SPI ROM here, we have to disable it after we leave.
@@ -970,7 +970,7 @@
if (new != old) {
pci_write_byte(dev, 0x88, new);
if (pci_read_byte(dev, 0x88) != new) {
- printf_debug("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x88, new, name);
+ msg_pinfo("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x88, new, name);
}
}
@@ -981,7 +981,7 @@
pci_write_byte(dev, 0x6d, new);
if (pci_read_byte(dev, 0x6d) != new) {
- printf_debug("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x6d, new, name);
+ msg_pinfo("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x6d, new, name);
return -1;
}
@@ -998,7 +998,7 @@
smbusdev = pci_dev_find(0x1002, 0x4372);
if (!smbusdev) {
- fprintf(stderr, "ERROR: SMBus device not found. Aborting.\n");
+ msg_perr("ERROR: SMBus device not found. Aborting.\n");
exit(1);
}
@@ -1047,7 +1047,7 @@
pci_write_byte(dev, 0x6d, new);
if (pci_read_byte(dev, 0x6d) != new) {
- printf_debug("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x6d, new, name);
+ msg_pinfo("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x6d, new, name);
return -1;
}
@@ -1277,7 +1277,7 @@
flashbase = parx << 12;
}
} else {
- printf("AMD Elan SC520 detected, but no BOOTCS. Assuming flash at 4G\n");
+ msg_pinfo("AMD Elan SC520 detected, but no BOOTCS. Assuming flash at 4G\n");
}
/* 4. Clean up */
@@ -1436,18 +1436,18 @@
}
if (dev) {
- printf("Found chipset \"%s %s\", enabling flash write... ",
+ msg_pinfo("Found chipset \"%s %s\", enabling flash write... ",
chipset_enables[i].vendor_name,
chipset_enables[i].device_name);
ret = chipset_enables[i].doit(dev,
chipset_enables[i].device_name);
if (ret)
- printf("FAILED!\n");
+ msg_pinfo("FAILED!\n");
else
- printf("OK.\n");
+ msg_pinfo("OK.\n");
}
- printf("This chipset supports the following protocols: %s.\n",
+ msg_pinfo("This chipset supports the following protocols: %s.\n",
flashbuses_to_text(buses_supported));
return ret;