)]}'
{
  "commit": "30dfdbaf3ab30974a6d76e085525d52c033e4215",
  "tree": "05451bdc93ffcab3935c6ac35f5f0dd480c9f012",
  "parents": [
    "e34e3e8a49172ba09eb058c9a028706647dca165"
  ],
  "author": {
    "name": "Brian Salcedo",
    "email": "bsalcedo@gmx.us",
    "time": "Thu Jan 03 20:44:30 2013 +0000"
  },
  "committer": {
    "name": "Stefan Tauner",
    "email": "stefan.tauner@alumni.tuwien.ac.at",
    "time": "Thu Jan 03 20:44:30 2013 +0000"
  },
  "message": "Add user interface to activate the Bus Pirate pull-up resistors\n\nWhen working with some flash chips using the Bus Pirate programmer, the\nuse of the Bus Pirate\u0027s on-board pull-up resistors is sometimes\nnecessary.\n\nOn v3 hardware the use of said pull-up resistors requires the user to apply a\nvoltage to the VPU pin of the Bus Pirate, and then command it to use them.\nFor v4 hardware which supports also fixed internal 3.3V and 5V sources no\ndocumentation could be found.\n\nHere is a link to information pertaining to what this patch does:\nhttp://dangerousprototypes.com/docs/SPI_(binary)#0100wxyz_-_Configure_peripherals_w.3Dpower.2C_x.3Dpull-ups.2C_y.3DAUX.2C_z.3DCS\n\nBonus: small cleanup of superfluous stack variables.\n\nCorresponding to flashrom svn r1641.\n\nSigned-off-by: Brian Salcedo \u003cbsalcedo@gmx.us\u003e\nSigned-off-by: Stefan Tauner \u003cstefan.tauner@alumni.tuwien.ac.at\u003e\nTested-by: Brian Salcedo \u003cbsalcedo@gmx.us\u003e\nAcked-by: Stefan Tauner \u003cstefan.tauner@alumni.tuwien.ac.at\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "55d4133bbe6f6072342595844734caf927679146",
      "old_mode": 33188,
      "old_path": "buspirate_spi.c",
      "new_id": "d2ebc75004ac14bb7bd9fda4c03ffea951a622a5",
      "new_mode": 33188,
      "new_path": "buspirate_spi.c"
    },
    {
      "type": "modify",
      "old_id": "102bd622ffa6625b666a0da93cae328f7daa90ab",
      "old_mode": 33188,
      "old_path": "flashrom.8",
      "new_id": "90afced623db0ee604658de0ff049cf1496550b4",
      "new_mode": 33188,
      "new_path": "flashrom.8"
    }
  ]
}