Add support for Sanyo LE25FU406C/LE25U40CMC
Corresponding to flashrom svn r1903.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Tested-by: Jose Luis León <zenky1@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flashchips.c b/flashchips.c
index 908b8a9..48c8c46 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -10675,6 +10675,43 @@
{
.vendor = "Sanyo",
+ .name = "LE25FU406C/LE25U40CMC",
+ .bustype = BUS_SPI,
+ .manufacture_id = SANYO_ID,
+ .model_id = SANYO_LE25FU406C,
+ .total_size = 512,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_OK_PR,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {4 * 1024, 128} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {4 * 1024, 128} },
+ .block_erase = spi_block_erase_d7,
+ }, {
+ .eraseblocks = { {64 * 1024, 8} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {512 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {512 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_bp2_srwd,
+ .unlock = spi_disable_blockprotect_bp2_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B), dual read (0x3B) and dual I/O (0xBB) supported */
+ .voltage = {2300, 3600},
+ },
+
+ {
+ .vendor = "Sanyo",
.name = "LE25FW203A",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,
diff --git a/flashchips.h b/flashchips.h
index c6de9f1..33190f1 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -595,6 +595,7 @@
#define SANYO_LE25FW418A 0x10 /* RES2 and some weird 1 byte RDID variant */
#define SANYO_LE25FW406A 0x1A /* RES2, no datasheet */
#define SANYO_LE25FU406B 0x1E /* LE25FW418A without HD_READ mode option variant */
+#define SANYO_LE25FU406C 0x0613 /* Also known as LE25U40CMC apparently */
#define SANYO_LE25FW806 0x26 /* RES2 and some weird 1 byte RDID variant */
#define SANYO_LE25FW808 0x20 /* RES2 and some weird 1 byte RDID variant */