Add board enable for Dell OptiPlex GX1 and mark Intel 28F002BC/BL/BV/BX-T as tested
Match on ethernet and north bridge.
This is tested on an OptiPlex GX1 400L+ but will probably work for
the whole GX1 series as they all share the same vendor BIOS.
lspci/flashrom output
http://www.flashrom.org/pipermail/flashrom/2010-July/004042.html
lspci output (OptiPlex GX1 unknown model)
http://www.coreboot.org/pipermail/coreboot/2010-May/058040.html
superiotool output (OptiPlex GX1 266L+)
http://www.flashrom.org/pipermail/flashrom/2009-July/000207.html
lspci/dmidecode output (OptiPlex GX1 266L+)
http://www.coreboot.org/pipermail/coreboot/2009-July/050958.html
Corresponding to flashrom svn r1191.
Signed-off-by: Mattias Mattsson <vitplister@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
diff --git a/board_enable.c b/board_enable.c
index 18af5bc..2c7f3b8 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -1195,6 +1195,15 @@
}
/*
+ * Suited for:
+ * - Dell OptiPlex GX1
+ */
+static int intel_piix4_gpo30_lower(void)
+{
+ return intel_piix4_gpo_set(30, 0);
+}
+
+/*
* Set a GPIO line on a given Intel ICH LPC controller.
*/
static int intel_ich_gpio_set(int gpio, int raise)
@@ -1904,6 +1913,7 @@
{0x8086, 0x266a, 0x1043, 0x80a6, 0x8086, 0x2668, 0x1043, 0x813d, NULL, NULL, NULL, "ASUS", "P5GDC Deluxe", 0, OK, intel_ich_gpio21_raise},
{0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, NULL, "ASUS", "P5ND2-SLI Deluxe", 0, OK, nvidia_mcp_gpio10_raise},
{0x8086, 0x24dd, 0x1043, 0x80a6, 0x8086, 0x2570, 0x1043, 0x8157, NULL, NULL, NULL, "ASUS", "P5PE-VM", 0, OK, intel_ich_gpio21_raise},
+ {0x10b7, 0x9055, 0x1028, 0x0082, 0x8086, 0x7190, 0, 0, NULL, NULL, NULL, "Dell", "OptiPlex GX1", 0, OK, intel_piix4_gpo30_lower},
{0x8086, 0x3590, 0x1028, 0x016c, 0x1000, 0x0030, 0x1028, 0x016c, NULL, NULL, NULL, "Dell", "PowerEdge 1850", 0, OK, intel_ich_gpio23_raise},
{0x10de, 0x03ea, 0x1019, 0x2602, 0x10de, 0x03e0, 0x1019, 0x2602, NULL, NULL, NULL, "Elitegroup", "GeForce6100SM-M", 0, OK, board_ecs_geforce6100sm_m},
{0x1106, 0x3038, 0x1019, 0x0996, 0x1106, 0x3177, 0x1019, 0x0996, NULL, NULL, NULL, "Elitegroup", "K7VTA3", 256, OK, NULL},
diff --git a/flashchips.c b/flashchips.c
index 35b9a5d..2b1af0b 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -3196,7 +3196,7 @@
.model_id = INTEL_28F002T,
.total_size = 256,
.page_size = 256 * 1024,
- .tested = TEST_UNTESTED,
+ .tested = TEST_OK_PREW,
.probe = probe_82802ab,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
diff --git a/print.c b/print.c
index e9cceca..d3a2b86 100644
--- a/print.c
+++ b/print.c
@@ -390,6 +390,7 @@
B("Biostar", "TA780G M2+", 1, "http://www.biostar.com.tw/app/en/t-series/content.php?S_ID=344", NULL),
B("Boser", "HS-6637", 0, "http://www.boser.com.tw/manual/HS-62376637v3.4.pdf", "Reported by Mark Robinson <mark@zl2tod.net> to flashrom@coreboot.org, no public archive. Missing board enable and/or F29C51002T unlocking. May work now."),
B("Congatec", "conga-X852", 1, "http://www.congatec.com/single_news+M57715f6263d.html?&L=1", NULL),
+ B("Dell", "OptiPlex GX1", 1, "http://support.dell.com/support/edocs/systems/ban_gx1/en/index.htm", NULL),
B("Dell", "PowerEdge 1850", 1, "http://support.dell.com/support/edocs/systems/pe1850/en/index.htm", NULL),
B("DFI", "855GME-MGF", 0, "http://www.dfi.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?action=e&downloadType=&windowstate=normal&mode=view&downloadFlag=false&itemId=433", "Probably needs a board enable. http://www.coreboot.org/pipermail/coreboot/2009-May/048549.html"),
B("DFI", "Blood-Iron P35 T2RL", 1, "http://lp.lanparty.com.tw/portal/CM/cmproduct/XX_cmproddetail/XX_WbProdsWindow?itemId=516&downloadFlag=false&action=1", NULL),