diff --git a/Makefile b/Makefile
index cf65c71..b087b3d 100644
--- a/Makefile
+++ b/Makefile
@@ -477,6 +477,7 @@
 FTDILIBS := $(shell pkg-config --libs libftdi 2>/dev/null || printf "%s" "-lftdi -lusb")
 # This is a totally ugly hack.
 FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_FT2232_SPI=1'")
+FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FT232H := yes" .features && printf "%s" "-D'HAVE_FT232H=1'")
 FEATURE_LIBS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "$(FTDILIBS)")
 PROGRAMMER_OBJS += ft2232_spi.o
 endif
@@ -731,6 +732,12 @@
 endef
 export FTDI_TEST
 
+define FTDI_232H_TEST
+#include <ftdi.h>
+enum ftdi_chip_type type = TYPE_232H;
+endef
+export FTDI_232H_TEST
+
 define UTSNAME_TEST
 #include <sys/utsname.h>
 struct utsname osinfo;
@@ -765,6 +772,11 @@
 	@$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >/dev/null 2>&1 &&	\
 		( echo "found."; echo "FTDISUPPORT := yes" >> .features.tmp ) ||	\
 		( echo "not found."; echo "FTDISUPPORT := no" >> .features.tmp )
+	@printf "Checking for FT232H support in libftdi... "
+	@echo "$$FTDI_232H_TEST" >> .featuretest.c
+	@$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >/dev/null 2>&1 &&	\
+		( echo "found."; echo "FT232H := yes" >> .features.tmp ) ||	\
+		( echo "not found."; echo "FT232H := no" >> .features.tmp )
 endif
 ifeq ($(CONFIG_LINUX_SPI), yes)
 	@printf "Checking if Linux SPI headers are present... "
diff --git a/flashrom.8 b/flashrom.8
index ae6b398..b054c28 100644
--- a/flashrom.8
+++ b/flashrom.8
@@ -15,7 +15,7 @@
 using a supported mainboard. However, it also supports various external
 PCI/USB/parallel-port/serial-port based devices which can program flash chips,
 including some network cards (NICs), SATA/IDE controller cards, graphics cards,
-the Bus Pirate device, various FTDI FT2232/FT4232H based USB devices, and more.
+the Bus Pirate device, various FTDI FT2232/FT4232H/FT232H based USB devices, and more.
 .PP
 It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, TSOP40,
 TSOP48, and BGA chips, which use various protocols such as LPC, FWH,
@@ -189,7 +189,7 @@
 .sp
 .BR "* atahpt" " (for flash ROMs on Highpoint ATA/RAID controllers)"
 .sp
-.BR "* ft2232_spi" " (for SPI flash ROMs attached to an FT2232/FT4232H family \
+.BR "* ft2232_spi" " (for SPI flash ROMs attached to an FT2232/FT4232H/FT232H family \
 based USB SPI programmer), including the DLP Design DLP-USB1232H, \
 FTDI FT2232H Mini-Module, FTDI FT4232H Mini-Module, openbiosprog-spi, Amontec \
 JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster, \
@@ -562,7 +562,7 @@
 syntax where
 .B model
 can be
-.BR 2232H ", " 4232H ", " jtagkey ", " busblaster ", " openmoko ", " \
+.BR 2232H ", " 4232H ", " 232H ", " jtagkey ", " busblaster ", " openmoko ", " \
 arm-usb-tiny ", " arm-usb-tiny-h ", " arm-usb-ocd ", " arm-usb-ocd-h \
 ", " tumpa ", or " picotap
 and
diff --git a/ft2232_spi.c b/ft2232_spi.c
index 628823f..bf3d76f 100644
--- a/ft2232_spi.c
+++ b/ft2232_spi.c
@@ -30,11 +30,18 @@
 #include "spi.h"
 #include <ftdi.h>
 
+/* This is not defined in libftdi.h <0.20 (c7e4c09e68cfa6f5e112334aa1b3bb23401c8dc7 to be exact).
+ * Some tests indicate that his is the only change that it is needed to support the FT232H in flashrom. */
+#if !defined(HAVE_FT232H)
+#define TYPE_232H	6
+#endif
+
 /* Please keep sorted by vendor ID, then device ID. */
 
 #define FTDI_VID		0x0403
 #define FTDI_FT2232H_PID	0x6010
 #define FTDI_FT4232H_PID	0x6011
+#define FTDI_FT232H_PID		0x6014
 #define TIAO_TUMPA_PID		0x8a98
 #define AMONTEC_JTAGKEY_PID	0xCFF8
 
@@ -53,6 +60,7 @@
 const struct usbdev_status devs_ft2232spi[] = {
 	{FTDI_VID, FTDI_FT2232H_PID, OK, "FTDI", "FT2232H"},
 	{FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"},
+	{FTDI_VID, FTDI_FT232H_PID, OK, "FTDI", "FT232H"},
 	{FTDI_VID, TIAO_TUMPA_PID, OK, "TIAO", "USB Multi-Protocol Adapter"},
 	{FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"},
 	{GOEPEL_VID, GOEPEL_PICOTAP_PID, OK, "GOEPEL", "PicoTAP"},
@@ -190,6 +198,9 @@
 		} else if (!strcasecmp(arg, "4232H")) {
 			ft2232_type = FTDI_FT4232H_PID;
 			channel_count = 4;
+		} else if (!strcasecmp(arg, "232H")) {
+			ft2232_type = FTDI_FT232H_PID;
+			channel_count = 1;
 		} else if (!strcasecmp(arg, "jtagkey")) {
 			ft2232_type = AMONTEC_JTAGKEY_PID;
 			channel_count = 2;
@@ -315,7 +326,7 @@
 		return -4;
 	}
 
-	if (ftdic->type != TYPE_2232H && ftdic->type != TYPE_4232H) {
+	if (ftdic->type != TYPE_2232H && ftdic->type != TYPE_4232H && ftdic->type != TYPE_232H) {
 		msg_pdbg("FTDI chip type %d is not high-speed\n",
 			ftdic->type);
 		clock_5x = 0;