Add support for Winbond W29C512A/W29EE512
Tested with a W29EE512P-70 (PLCC32, 5V) found on an RTL8169 network card.
The ID for the chip was already in flashchips.h with the name W29C512A
and a note for "also W29EE512". The datasheets are almost identical.
Corresponding to flashrom svn r1892.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/flashchips.c b/flashchips.c
index d50df85..574ad74 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -14512,6 +14512,30 @@
{
.vendor = "Winbond",
+ .name = "W29C512A/W29EE512",
+ .bustype = BUS_PARALLEL,
+ .manufacture_id = WINBOND_ID,
+ .model_id = WINBOND_W29C512A,
+ .total_size = 64,
+ .page_size = 128,
+ .feature_bits = FEATURE_LONG_RESET,
+ .tested = TEST_OK_PREW,
+ .probe = probe_jedec,
+ .probe_timing = 10,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {64 * 1024, 1} },
+ .block_erase = erase_chip_block_jedec,
+ }
+ },
+ .write = write_jedec,
+ .read = read_memmapped,
+ .voltage = {4500, 5500},
+ },
+
+ {
+ .vendor = "Winbond",
.name = "W29C010(M)/W29C011A/W29EE011/W29EE012-old",
.bustype = BUS_PARALLEL,
.manufacture_id = WINBOND_ID,