Add support for AT45CS1282
This one is even more strange than the AT45DB chips. Like the AT45DB321C
it does not support any power-of-2 page sizes. There is only one asymmetrical
eraser and that uses two opcodes.
Corresponding to flashrom svn r1725.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/at45db.c b/at45db.c
index ba2735d..5c90418 100644
--- a/at45db.c
+++ b/at45db.c
@@ -419,6 +419,47 @@
return at45db_erase(flash, AT45DB_CHIP_ERASE, AT45DB_CHIP_ERASE_ADDR, 500000, 200);
}
+/* This one is really special and works only for AT45CS1282. It uses two different opcodes depending on the
+ * address and has an asymmetric layout. */
+int spi_erase_at45cs_sector(struct flashctx *flash, unsigned int addr, unsigned int blocklen)
+{
+ const unsigned int page_size = flash->chip->page_size;
+ const unsigned int total_size = flash->chip->total_size * 1024;
+ const struct block_eraser be = flash->chip->block_erasers[0];
+ const unsigned int sec_0a_top = be.eraseblocks[0].size;
+ const unsigned int sec_0b_top = be.eraseblocks[0].size + be.eraseblocks[1].size;
+
+ if ((addr + blocklen) > total_size) {
+ msg_cerr("%s: tried to erase a sector beyond flash boundary: addr=%u, blocklen=%u, size=%u\n",
+ __func__, addr, blocklen, total_size);
+ return 1;
+ }
+
+ bool partial_range = false;
+ uint8_t opcode = 0x7C; /* Used for all but sector 0a. */
+ if (addr < sec_0a_top) {
+ opcode = 0x50;
+ /* One single sector of 8 pages at address 0. */
+ if (addr != 0 || blocklen != (8 * page_size))
+ partial_range = true;
+ } else if (addr < sec_0b_top) {
+ /* One single sector of 248 pages adjacent to the first. */
+ if (addr != sec_0a_top || blocklen != (248 * page_size))
+ partial_range = true;
+ } else {
+ /* The rest is filled by 63 aligned sectors of 256 pages. */
+ if ((addr % (256 * page_size)) != 0 || (blocklen % (256 * page_size)) != 0)
+ partial_range = true;
+ }
+ if (partial_range) {
+ msg_cerr("%s: cannot erase partial sectors: addr=%u, blocklen=%u\n", __func__, addr, blocklen);
+ return 1;
+ }
+
+ /* Needs up to 4 s for completion, so let's wait 20 seconds in 200 ms steps. */
+ return at45db_erase(flash, opcode, at45db_convert_addr(addr, page_size), 200000, 100);
+}
+
static int at45db_fill_buffer1(struct flashctx *flash, uint8_t *bytes, unsigned int off, unsigned int len)
{
const unsigned int page_size = flash->chip->page_size;