flashrom.8: carve out `csgpiol` into its own section
Documentation for `csgpiol` was put into the generic programmer options
section. Move it to its own section.
Change-Id: Ic7379331d36b3068eacde5a983b4ccb3afc56c51
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Original-Reviewed-on: https://review.coreboot.org/c/flashrom/+/57893
Original-Reviewed-by: Nico Huber <nico.h@gmx.de>
Original-Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/flashrom-stable/+/71430
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl
index 9ec4d77..9f4493c 100644
--- a/flashrom.8.tmpl
+++ b/flashrom.8.tmpl
@@ -771,9 +771,9 @@
Flyswatter/Flyswatter 2.
.sp
An optional parameter specifies the controller
-type, channel/interface/port and GPIO-based chip select it should support. For that you have to use the
+type, channel/interface/port it should support. For that you have to use the
.sp
-.B " flashrom \-p ft2232_spi:type=model,port=interface,csgpiol=gpio"
+.B " flashrom \-p ft2232_spi:type=model,port=interface"
.sp
syntax where
.B model
@@ -784,10 +784,7 @@
" or " google-servo-v2-legacy
.B interface
can be
-.BR A ", " B ", " C ", or " D
-and
-.B csgpiol
-can be a number between 0 and 3, denoting GPIOL0-GPIOL3 correspondingly.
+.BR A ", " B ", " C ", or " D .
The default model is
.B 4232H
the default interface is
@@ -815,6 +812,14 @@
.B " flashrom \-p ft2232_spi:divisor=div"
.sp
syntax.
+.sp
+Using the parameter
+.B csgpiol
+an additional CS# pin can be chosen, where the value can be a number between 0 and 3, denoting GPIOL0-GPIOL3
+correspondingly. Example:
+.sp
+.B " flashrom \-p ft2232_spi:csgpiol=3"
+.sp
.SS
.BR "serprog " programmer
.IP