internal: Fix board vendor and model memory leaks
The board vendor and model are sometimes specified as arguments during
an internal flash, so make sure they are freed at the end of
initialization.
Change-Id: I9f43708f3b075896be67acec114bc6f390f8c6ca
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1230664, 1230665
Reviewed-on: https://review.coreboot.org/c/flashrom/+/34846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
diff --git a/internal.c b/internal.c
index 12c0ba3..44570a5 100644
--- a/internal.c
+++ b/internal.c
@@ -145,8 +145,8 @@
int ret = 0;
int force_laptop = 0;
int not_a_laptop = 0;
- const char *board_vendor = NULL;
- const char *board_model = NULL;
+ char *board_vendor = NULL;
+ char *board_model = NULL;
#if IS_X86
const char *cb_vendor = NULL;
const char *cb_model = NULL;
@@ -210,8 +210,10 @@
}
free(arg);
- if (rget_io_perms())
- return 1;
+ if (rget_io_perms()) {
+ ret = 1;
+ goto internal_init_exit;
+ }
/* Default to Parallel/LPC/FWH flash devices. If a known host controller
* is found, the host controller init routine sets the
@@ -219,17 +221,22 @@
*/
internal_buses_supported = BUS_NONSPI;
- if (try_mtd() == 0)
- return 0;
+ if (try_mtd() == 0) {
+ ret = 0;
+ goto internal_init_exit;
+ }
/* Initialize PCI access for flash enables */
- if (pci_init_common() != 0)
- return 1;
+ if (pci_init_common() != 0) {
+ ret = 1;
+ goto internal_init_exit;
+ }
if (processor_flash_enable()) {
msg_perr("Processor detection/init failed.\n"
"Aborting.\n");
- return 1;
+ ret = 1;
+ goto internal_init_exit;
}
#if IS_X86
@@ -238,8 +245,10 @@
msg_pwarn("Warning: The mainboard IDs set by -p internal:mainboard (%s:%s) do not\n"
" match the current coreboot IDs of the mainboard (%s:%s).\n",
board_vendor, board_model, cb_vendor, cb_model);
- if (!force_boardmismatch)
- return 1;
+ if (!force_boardmismatch) {
+ ret = 1;
+ goto internal_init_exit;
+ }
msg_pinfo("Continuing anyway.\n");
}
}
@@ -281,8 +290,9 @@
if (ret == -2) {
msg_perr("WARNING: No chipset found. Flash detection "
"will most likely fail.\n");
- } else if (ret == ERROR_FATAL)
- return ret;
+ } else if (ret == ERROR_FATAL) {
+ goto internal_init_exit;
+ }
#if IS_X86
/* Probe unconditionally for ITE Super I/O chips. This enables LPC->SPI translation on IT87* and
@@ -291,7 +301,8 @@
if (board_flash_enable(board_vendor, board_model, cb_vendor, cb_model)) {
msg_perr("Aborting to be safe.\n");
- return 1;
+ ret = 1;
+ goto internal_init_exit;
}
#endif
@@ -325,7 +336,13 @@
"========================================================================\n");
}
- return 0;
+ ret = 0;
+
+internal_init_exit:
+ free(board_vendor);
+ free(board_model);
+
+ return ret;
}
static void internal_chip_writeb(const struct flashctx *flash, uint8_t val,