Introduce serialport_config()
This allows to easily reconfigure a serial port as needed in
the Bus Pirate speedup patch.
Corresponding to flashrom svn r1717.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/serial.c b/serial.c
index 1b394cd..562a95a 100644
--- a/serial.c
+++ b/serial.c
@@ -158,10 +158,76 @@
#endif
}
+int serialport_config(fdtype fd, unsigned int baud)
+{
+ if (fd == SER_INV_FD) {
+ msg_perr("%s: File descriptor is invalid.\n", __func__);
+ return 1;
+ }
+
+#ifdef _WIN32
+ DCB dcb;
+ if (!GetCommState(fd, &dcb)) {
+ msg_perr_strerror("Could not fetch original serial port configuration: ");
+ return 1;
+ }
+ const struct baudentry *entry = round_baud(baud);
+ dcb.BaudRate = entry->flag;
+ dcb.ByteSize = 8;
+ dcb.Parity = NOPARITY;
+ dcb.StopBits = ONESTOPBIT;
+ if (!SetCommState(fd, &dcb)) {
+ msg_perr_strerror("Could not change serial port configuration: ");
+ return 1;
+ }
+ if (!GetCommState(fd, &dcb)) {
+ msg_perr_strerror("Could not fetch new serial port configuration: ");
+ return 1;
+ }
+ msg_pdbg("Baud rate is %ld.\n", dcb.BaudRate);
+#else
+ struct termios wanted, observed;
+ fcntl(fd, F_SETFL, 0);
+ if (tcgetattr(fd, &observed) != 0) {
+ msg_perr_strerror("Could not fetch original serial port configuration: ");
+ return 1;
+ }
+ wanted = observed;
+ const struct baudentry *entry = round_baud(baud);
+ if (cfsetispeed(&wanted, entry->flag) != 0 || cfsetospeed(&wanted, entry->flag) != 0) {
+ msg_perr_strerror("Could not set serial baud rate: ");
+ return 1;
+ }
+ wanted.c_cflag &= ~(PARENB | CSTOPB | CSIZE | CRTSCTS);
+ wanted.c_cflag |= (CS8 | CLOCAL | CREAD);
+ wanted.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
+ wanted.c_iflag &= ~(IXON | IXOFF | IXANY | ICRNL | IGNCR | INLCR);
+ wanted.c_oflag &= ~OPOST;
+ if (tcsetattr(fd, TCSANOW, &wanted) != 0) {
+ msg_perr_strerror("Could not change serial port configuration: ");
+ return 1;
+ }
+ if (tcgetattr(fd, &observed) != 0) {
+ msg_perr_strerror("Could not fetch new serial port configuration: ");
+ return 1;
+ }
+ if (observed.c_cflag != wanted.c_cflag ||
+ observed.c_lflag != wanted.c_lflag ||
+ observed.c_iflag != wanted.c_iflag ||
+ observed.c_oflag != wanted.c_oflag ||
+ cfgetispeed(&observed) != cfgetispeed(&wanted)) {
+ msg_perr("%s: Some requested options did not stick.\n", __func__);
+ return 1;
+ }
+ msg_pdbg("Baud rate is %d now.\n", entry->baud);
+#endif
+ return 0;
+}
+
fdtype sp_openserport(char *dev, unsigned int baud)
{
+ fdtype fd;
#ifdef _WIN32
- HANDLE fd;
char *dev2 = dev;
if ((strlen(dev) > 3) &&
(tolower((unsigned char)dev[0]) == 'c') &&
@@ -183,75 +249,22 @@
msg_perr_strerror("Cannot open serial port: ");
return SER_INV_FD;
}
- DCB dcb;
- if (!GetCommState(fd, &dcb)) {
- msg_perr_strerror("Could not fetch original serial port configuration: ");
- goto out_close;
+ if (serialport_config(fd, baud) != 0) {
+ CloseHandle(fd);
+ return SER_INV_FD;
}
- const struct baudentry *entry = round_baud(baud);
- dcb.BaudRate = entry->flag;
- dcb.ByteSize = 8;
- dcb.Parity = NOPARITY;
- dcb.StopBits = ONESTOPBIT;
- if (!SetCommState(fd, &dcb)) {
- msg_perr_strerror("Could not change serial port configuration: ");
- goto out_close;
- }
- if (!GetCommState(fd, &dcb)) {
- msg_perr_strerror("Could not fetch new serial port configuration: ");
- goto out_close;
- }
- msg_pdbg("Baud rate is %ld.\n", dcb.BaudRate);
return fd;
-out_close:
- CloseHandle(sp_fd);
- return SER_INV_FD;
#else
- struct termios wanted, observed;
- int fd;
fd = open(dev, O_RDWR | O_NOCTTY | O_NDELAY);
if (fd < 0) {
msg_perr_strerror("Cannot open serial port: ");
return SER_INV_FD;
}
- fcntl(fd, F_SETFL, 0);
- if (tcgetattr(fd, &observed) != 0) {
- msg_perr_strerror("Could not fetch original serial port configuration: ");
- goto out_close;
+ if (serialport_config(fd, baud) != 0) {
+ close(fd);
+ return SER_INV_FD;
}
- wanted = observed;
- const struct baudentry *entry = round_baud(baud);
- if (cfsetispeed(&wanted, entry->flag) != 0 || cfsetospeed(&wanted, entry->flag) != 0) {
- msg_perr_strerror("Could not set serial baud rate: ");
- goto out_close;
- }
- wanted.c_cflag &= ~(PARENB | CSTOPB | CSIZE | CRTSCTS);
- wanted.c_cflag |= (CS8 | CLOCAL | CREAD);
- wanted.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
- wanted.c_iflag &= ~(IXON | IXOFF | IXANY | ICRNL | IGNCR | INLCR);
- wanted.c_oflag &= ~OPOST;
- if (tcsetattr(fd, TCSANOW, &wanted) != 0) {
- msg_perr_strerror("Could not change serial port configuration: ");
- goto out_close;
- }
- if (tcgetattr(fd, &observed) != 0) {
- msg_perr_strerror("Could not fetch new serial port configuration: ");
- goto out_close;
- }
- if (observed.c_cflag != wanted.c_cflag ||
- observed.c_lflag != wanted.c_lflag ||
- observed.c_iflag != wanted.c_iflag ||
- observed.c_oflag != wanted.c_oflag ||
- cfgetispeed(&observed) != cfgetispeed(&wanted)) {
- msg_perr("%s: Some requested options did not stick.\n", __func__);
- goto out_close;
- }
- msg_pdbg("Baud rate is %d.\n", entry->baud);
return fd;
-
-out_close:
- close(sp_fd);
- return SER_INV_FD;
#endif
}