print.c: change all occurrences of printf to msg_ginfo
Corresponding to flashrom svn r1351.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
diff --git a/print.c b/print.c
index 332c35c..28c0e18 100644
--- a/print.c
+++ b/print.c
@@ -59,7 +59,7 @@
return ret;
}
-#define POS_PRINT(x) do { pos += strlen(x); printf(x); } while (0)
+#define POS_PRINT(x) do { pos += strlen(x); msg_ginfo(x); } while (0)
static int digits(int n)
{
@@ -93,31 +93,31 @@
maxchiplen++;
okcol = maxvendorlen + maxchiplen;
- printf("Supported flash chips (total: %d):\n\n", chipcount);
- printf("Vendor");
+ msg_ginfo("Supported flash chips (total: %d):\n\n", chipcount);
+ msg_ginfo("Vendor");
for (i = strlen("Vendor"); i < maxvendorlen; i++)
- printf(" ");
- printf("Device");
+ msg_ginfo(" ");
+ msg_ginfo("Device");
for (i = strlen("Device"); i < maxchiplen; i++)
- printf(" ");
+ msg_ginfo(" ");
- printf("Tested Known Size/kB: Type:\n");
+ msg_ginfo("Tested Known Size/kB: Type:\n");
for (i = 0; i < okcol; i++)
- printf(" ");
- printf("OK Broken\n\n");
- printf("(P = PROBE, R = READ, E = ERASE, W = WRITE)\n\n");
+ msg_ginfo(" ");
+ msg_ginfo("OK Broken\n\n");
+ msg_ginfo("(P = PROBE, R = READ, E = ERASE, W = WRITE)\n\n");
for (f = flashchips; f->name != NULL; f++) {
/* Don't print "unknown XXXX SPI chip" entries. */
if (!strncmp(f->name, "unknown", 7))
continue;
- printf("%s", f->vendor);
+ msg_ginfo("%s", f->vendor);
for (i = strlen(f->vendor); i < maxvendorlen; i++)
- printf(" ");
- printf("%s", f->name);
+ msg_ginfo(" ");
+ msg_ginfo("%s", f->name);
for (i = strlen(f->name); i < maxchiplen; i++)
- printf(" ");
+ msg_ginfo(" ");
pos = maxvendorlen + maxchiplen;
if ((f->tested & TEST_OK_MASK)) {
@@ -131,7 +131,7 @@
POS_PRINT("W ");
}
while (pos < okcol + 9) {
- printf(" ");
+ msg_ginfo(" ");
pos++;
}
if ((f->tested & TEST_BAD_MASK)) {
@@ -146,13 +146,13 @@
}
while (pos < okcol + 18) {
- printf(" ");
+ msg_ginfo(" ");
pos++;
}
- printf("%d", f->total_size);
+ msg_ginfo("%d", f->total_size);
for (i = 0; i < 10 - digits(f->total_size); i++)
- printf(" ");
- printf("%s\n", flashbuses_to_text(f->bustype));
+ msg_ginfo(" ");
+ msg_ginfo("%s\n", flashbuses_to_text(f->bustype));
}
}
@@ -172,26 +172,26 @@
maxvendorlen++;
maxchipsetlen++;
- printf("Supported chipsets (total: %d):\n\n", chipsetcount);
+ msg_ginfo("Supported chipsets (total: %d):\n\n", chipsetcount);
- printf("Vendor");
+ msg_ginfo("Vendor");
for (i = strlen("Vendor"); i < maxvendorlen; i++)
- printf(" ");
+ msg_ginfo(" ");
- printf("Chipset");
+ msg_ginfo("Chipset");
for (i = strlen("Chipset"); i < maxchipsetlen; i++)
- printf(" ");
+ msg_ginfo(" ");
- printf("PCI IDs State\n\n");
+ msg_ginfo("PCI IDs State\n\n");
for (c = chipset_enables; c->vendor_name != NULL; c++) {
- printf("%s", c->vendor_name);
+ msg_ginfo("%s", c->vendor_name);
for (i = 0; i < maxvendorlen - strlen(c->vendor_name); i++)
- printf(" ");
- printf("%s", c->device_name);
+ msg_ginfo(" ");
+ msg_ginfo("%s", c->device_name);
for (i = 0; i < maxchipsetlen - strlen(c->device_name); i++)
- printf(" ");
- printf("%04x:%04x%s\n", c->vendor_id, c->device_id,
+ msg_ginfo(" ");
+ msg_ginfo("%04x:%04x%s\n", c->vendor_id, c->device_id,
(c->status == OK) ? "" : " (untested)");
}
}
@@ -216,39 +216,39 @@
maxvendorlen++;
maxboardlen++;
- printf("Known %s (good: %d, bad: %d):\n\n",
+ msg_ginfo("Known %s (good: %d, bad: %d):\n\n",
devicetype, boardcount_good, boardcount_bad);
- printf("Vendor");
+ msg_ginfo("Vendor");
for (i = strlen("Vendor"); i < maxvendorlen; i++)
- printf(" ");
+ msg_ginfo(" ");
- printf("Board");
+ msg_ginfo("Board");
for (i = strlen("Board"); i < maxboardlen; i++)
- printf(" ");
+ msg_ginfo(" ");
- printf("Status Required option\n\n");
+ msg_ginfo("Status Required option\n\n");
for (b = boards; b->vendor != NULL; b++) {
- printf("%s", b->vendor);
+ msg_ginfo("%s", b->vendor);
for (i = 0; i < maxvendorlen - strlen(b->vendor); i++)
- printf(" ");
- printf("%s", b->name);
+ msg_ginfo(" ");
+ msg_ginfo("%s", b->name);
for (i = 0; i < maxboardlen - strlen(b->name); i++)
- printf(" ");
- printf((b->working) ? "OK " : "BAD ");
+ msg_ginfo(" ");
+ msg_ginfo((b->working) ? "OK " : "BAD ");
for (e = board_pciid_enables; e->vendor_name != NULL; e++) {
if (strcmp(e->vendor_name, b->vendor)
|| strcmp(e->board_name, b->name))
continue;
if (e->lb_vendor == NULL)
- printf("(autodetected)");
+ msg_ginfo("(autodetected)");
else
- printf("-m %s:%s", e->lb_vendor,
+ msg_ginfo("-m %s:%s", e->lb_vendor,
e->lb_part);
}
- printf("\n");
+ msg_ginfo("\n");
}
}
#endif
@@ -257,104 +257,104 @@
{
print_supported_chips();
- printf("\nSupported programmers:\n");
+ msg_ginfo("\nSupported programmers:\n");
list_programmers_linebreak(0, 80, 0);
#if CONFIG_INTERNAL == 1
- printf("\nSupported devices for the %s programmer:\n\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n\n",
programmer_table[PROGRAMMER_INTERNAL].name);
print_supported_chipsets();
- printf("\n");
+ msg_ginfo("\n");
print_supported_boards_helper(boards_known, "boards");
- printf("\n");
+ msg_ginfo("\n");
print_supported_boards_helper(laptops_known, "laptops");
#endif
#if CONFIG_DUMMY == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_DUMMY].name);
/* FIXME */
- printf("Dummy device, does nothing and logs all accesses\n");
+ msg_ginfo("Dummy device, does nothing and logs all accesses\n");
#endif
#if CONFIG_NIC3COM == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_NIC3COM].name);
print_supported_pcidevs(nics_3com);
#endif
#if CONFIG_NICREALTEK == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_NICREALTEK].name);
print_supported_pcidevs(nics_realtek);
#endif
#if CONFIG_NICNATSEMI == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_NICNATSEMI].name);
print_supported_pcidevs(nics_natsemi);
#endif
#if CONFIG_GFXNVIDIA == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_GFXNVIDIA].name);
print_supported_pcidevs(gfx_nvidia);
#endif
#if CONFIG_DRKAISER == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_DRKAISER].name);
print_supported_pcidevs(drkaiser_pcidev);
#endif
#if CONFIG_SATASII == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_SATASII].name);
print_supported_pcidevs(satas_sii);
#endif
#if CONFIG_ATAHPT == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_ATAHPT].name);
print_supported_pcidevs(ata_hpt);
#endif
#if CONFIG_FT2232_SPI == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_FT2232_SPI].name);
print_supported_usbdevs(devs_ft2232spi);
#endif
#if CONFIG_SERPROG == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_SERPROG].name);
/* FIXME */
- printf("All programmer devices speaking the serprog protocol\n");
+ msg_ginfo("All programmer devices speaking the serprog protocol\n");
#endif
#if CONFIG_BUSPIRATE_SPI == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_BUSPIRATE_SPI].name);
/* FIXME */
- printf("Dangerous Prototypes Bus Pirate\n");
+ msg_ginfo("Dangerous Prototypes Bus Pirate\n");
#endif
#if CONFIG_DEDIPROG == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_DEDIPROG].name);
/* FIXME */
- printf("Dediprog SF100\n");
+ msg_ginfo("Dediprog SF100\n");
#endif
#if CONFIG_RAYER_SPI == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_RAYER_SPI].name);
/* FIXME */
- printf("RayeR parallel port programmer\n");
+ msg_ginfo("RayeR parallel port programmer\n");
#endif
#if CONFIG_NICINTEL == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_NICINTEL].name);
print_supported_pcidevs(nics_intel);
#endif
#if CONFIG_NICINTEL_SPI == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_NICINTEL_SPI].name);
print_supported_pcidevs(nics_intel_spi);
#endif
#if CONFIG_OGP_SPI == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_OGP_SPI].name);
print_supported_pcidevs(ogp_spi);
#endif
#if CONFIG_SATAMV == 1
- printf("\nSupported devices for the %s programmer:\n",
+ msg_ginfo("\nSupported devices for the %s programmer:\n",
programmer_table[PROGRAMMER_SATAMV].name);
print_supported_pcidevs(satas_mv);
#endif