Fix whitespace errors
Change-Id: Ic2d3bb9d8581a0471a8568a130f893b34dddf113
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
diff --git a/board_enable.c b/board_enable.c
index 182a455..a3e4515 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -159,7 +159,7 @@
struct winbond_port {
const struct winbond_mux *mux; /* NULL or pointer to mux info for the 8 bits */
uint8_t ldn; /* LDN this GPIO register is located in */
- uint8_t enable_bit; /* bit in 0x30 of that LDN to enable
+ uint8_t enable_bit; /* bit in 0x30 of that LDN to enable
the GPIO port */
uint8_t base; /* base register in that LDN for the port */
};
@@ -547,8 +547,8 @@
}
} else {
msg_pinfo("BIOS ROM is disabled\n");
- }
- w836xx_ext_leave(port);
+ }
+ w836xx_ext_leave(port);
}
/*
@@ -1036,7 +1036,7 @@
case 0x0364: /* MCP55 */
/* find SMBus controller on *this* southbridge */
/* The infamous Tyan S2915-E has two south bridges; they are
- easily told apart from each other by the class of the
+ easily told apart from each other by the class of the
LPC bridge, but have the same SMBus bridge IDs */
if (dev->func != 0) {
msg_perr("MCP LPC bridge at unexpected function"
diff --git a/buspirate_spi.c b/buspirate_spi.c
index f825415..00a4423 100644
--- a/buspirate_spi.c
+++ b/buspirate_spi.c
@@ -42,7 +42,7 @@
{
/* 115200bps, 8 databits, no parity, 1 stopbit */
sp_fd = sp_openserport(dev, BP_DEFAULTBAUD);
- if (sp_fd == SER_INV_FD)
+ if (sp_fd == SER_INV_FD)
return 1;
return 0;
}
diff --git a/cbtable.c b/cbtable.c
index c1c264a..ea616ed 100644
--- a/cbtable.c
+++ b/cbtable.c
@@ -289,7 +289,7 @@
}
addr = ((char *)lb_table) - ((char *)table_area) + start;
- msg_pinfo("coreboot table found at 0x%lx.\n",
+ msg_pinfo("coreboot table found at 0x%lx.\n",
(unsigned long)lb_table - (unsigned long)table_area + start);
rec = (struct lb_record *)(((char *)lb_table) + lb_table->header_bytes);
last = (struct lb_record *)(((char *)rec) + lb_table->table_bytes);
diff --git a/chipset_enable.c b/chipset_enable.c
index 8243455..9c88695 100644
--- a/chipset_enable.c
+++ b/chipset_enable.c
@@ -1117,7 +1117,7 @@
/*
* Geode systems write protect the BIOS via RCONFs (cache settings similar
- * to MTRRs). To unlock, change MSR 0x1808 top byte to 0x22.
+ * to MTRRs). To unlock, change MSR 0x1808 top byte to 0x22.
*
* Geode systems also write protect the NOR flash chip itself via MSR_NORF_CTL.
* To enable write to NOR Boot flash for the benefit of systems that have such
diff --git a/coreboot_tables.h b/coreboot_tables.h
index 2e96526..a5f1586 100644
--- a/coreboot_tables.h
+++ b/coreboot_tables.h
@@ -29,7 +29,7 @@
* is expected to be information that cannot be discovered by
* other means, such as querying the hardware directly.
*
- * All of the information should be Position Independent Data.
+ * All of the information should be Position Independent Data.
* That is it should be safe to relocated any of the information
* without it's meaning/correctness changing. For table that
* can reasonably be used on multiple architectures the data
@@ -52,9 +52,9 @@
* table entries and be backwards compatible, but it is not required.
*/
-/* Since coreboot is usually compiled 32bit, gcc will align 64bit
- * types to 32bit boundaries. If the coreboot table is dumped on a
- * 64bit system, a uint64_t would be aligned to 64bit boundaries,
+/* Since coreboot is usually compiled 32bit, gcc will align 64bit
+ * types to 32bit boundaries. If the coreboot table is dumped on a
+ * 64bit system, a uint64_t would be aligned to 64bit boundaries,
* breaking the table format.
*
* lb_uint64 will keep 64bit coreboot table values aligned to 32bit
diff --git a/dediprog.c b/dediprog.c
index 146b3e7..c4d5c9d 100644
--- a/dediprog.c
+++ b/dediprog.c
@@ -505,8 +505,8 @@
if (!transfers[i]) {
msg_perr("Allocating libusb transfer %i failed: %s!\n", i, libusb_error_name(ret));
goto err_free;
- }
- }
+ }
+ }
/* Now transfer requested chunks using libusb's asynchronous interface. */
while (!status.error && (status.queued_idx < count)) {
diff --git a/flashchips.c b/flashchips.c
index 70057d4..98a41a9 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -3068,7 +3068,7 @@
}
},
.printlock = printlock_at49f,
- .write = write_jedec_1,
+ .write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
@@ -13833,7 +13833,7 @@
.name = "SST49LF080A",
.bustype = BUS_LPC, /* A/A Mux */
.manufacture_id = SST_ID,
- .model_id = SST_SST49LF080A,
+ .model_id = SST_SST49LF080A,
.total_size = 1024,
.page_size = 4096,
.feature_bits = FEATURE_EITHER_RESET,
diff --git a/flashchips.h b/flashchips.h
index 68a67fa..c4ea636 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -592,7 +592,7 @@
#define PMC_PM49FL002 0x6D
#define PMC_PM49FL004 0x6E
-/*
+/*
* The Sanyo chip found so far uses SPI, first byte is manufacture code,
* second byte is the device code,
* third byte is a dummy byte.
diff --git a/ichspi.c b/ichspi.c
index 5fe25f6..5abc5f8 100644
--- a/ichspi.c
+++ b/ichspi.c
@@ -712,7 +712,7 @@
bbar_off = ICH9_REG_BBAR;
break;
}
-
+
ichspi_bbar = mmio_readl(ich_spibar + bbar_off) & ~BBAR_MASK;
if (ichspi_bbar) {
msg_pdbg("Reserved bits in BBAR not zero: 0x%08x\n",
@@ -737,7 +737,7 @@
* may even crash.
*/
static void ich_read_data(uint8_t *data, int len, int reg0_off)
- {
+{
int i;
uint32_t temp32 = 0;
diff --git a/it85spi.c b/it85spi.c
index 1cc8730..fec3af9 100644
--- a/it85spi.c
+++ b/it85spi.c
@@ -54,7 +54,7 @@
/* The 8042 keyboard controller uses an input buffer and an output buffer to
* communicate with the host CPU. Both buffers are 1-byte depth. That means
- * IBF is set to 1 when the host CPU sends a command to the input buffer
+ * IBF is set to 1 when the host CPU sends a command to the input buffer
* of the EC. IBF is cleared to 0 once the command is read by the EC.
*/
#define KB_IBF (1 << 1) /* Input Buffer Full */
diff --git a/jedec.c b/jedec.c
index af13876..bd3af2f 100644
--- a/jedec.c
+++ b/jedec.c
@@ -68,7 +68,7 @@
* The Winbond W39V040C wants 50 ms between reads on sector erase toggle,
* but experiments show that 2 ms are already enough. Pick a safety factor
* of 4 and use an 8 ms delay.
- * Given that erase is slow on all chips, it is recommended to use
+ * Given that erase is slow on all chips, it is recommended to use
* toggle_ready_jedec_slow in erase functions.
*/
static void toggle_ready_jedec_slow(const struct flashctx *flash, chipaddr dst)
diff --git a/nicintel.c b/nicintel.c
index 69b40d3..b2fe82a 100644
--- a/nicintel.c
+++ b/nicintel.c
@@ -40,7 +40,7 @@
#define NICINTEL_MEMMAP_SIZE (128 * 1024)
#define NICINTEL_MEMMAP_MASK (NICINTEL_MEMMAP_SIZE - 1)
-#define NICINTEL_CONTROL_MEMMAP_SIZE 0x10
+#define NICINTEL_CONTROL_MEMMAP_SIZE 0x10
#define CSR_FCR 0x0c
diff --git a/pcidev.c b/pcidev.c
index f4e5542..24b7aa1 100644
--- a/pcidev.c
+++ b/pcidev.c
@@ -325,13 +325,13 @@
register_undo_pci_write_byte(dev, reg);
return pci_write_byte(dev, reg, data);
}
-
+
int rpci_write_word(struct pci_dev *dev, int reg, uint16_t data)
{
register_undo_pci_write_word(dev, reg);
return pci_write_word(dev, reg, data);
}
-
+
int rpci_write_long(struct pci_dev *dev, int reg, uint32_t data)
{
register_undo_pci_write_long(dev, reg);
diff --git a/serprog.c b/serprog.c
index 62f2820..c5a35b4 100644
--- a/serprog.c
+++ b/serprog.c
@@ -662,7 +662,7 @@
}
msg_pdbg(MSGHEADER "operation buffer size is %d\n",
sp_device_opbuf_size);
- }
+ }
if (sp_check_commandavail(S_CMD_S_PIN_STATE)) {
uint8_t en = 1;
diff --git a/udelay.c b/udelay.c
index 3a44c16..e21086b 100644
--- a/udelay.c
+++ b/udelay.c
@@ -170,7 +170,7 @@
/* Avoid division by zero, but in that case the loop is shot anyway. */
if (!timeusec)
timeusec = 1;
-
+
/* Compute rounded up number of loops per microsecond. */
micro = (count * micro) / timeusec + 1;
msg_pdbg("%luM loops per second, ", micro);
@@ -183,7 +183,7 @@
for (i = 0; i < 4; i++) {
if (resolution && (resolution < 10)) {
timeusec = measure_delay(100);
- } else if (resolution &&
+ } else if (resolution &&
(resolution < ULONG_MAX / 200)) {
timeusec = measure_delay(resolution * 10) *
100 / (resolution * 10);